Blender integration through the Model Context Protocol
Nothing to run from here
3D Printer on Demand is installed from its publisher's own source and answers where it runs, so this marketplace is not in the path of a single call. There is no address here to send one to, and a panel that pretended otherwise would be showing you an answer we made up. Install it and call it from your own client — the Installation tab has the entry for each one.
9
tools declared
—
trust score
remote
at its publisher
—
calls last 7d
What it does
Quote, check and order 3D prints of STL, 3MF, STEP or OBJ files. Made in the USA, shipped in the US.
Quickstart
# 1 — add it to Claude Code
claude mcp add --scope user --transport http 3d-printer-on-demand-mcp https://3dprinterondemand.com/api/mcp
# 2 — ask your agent for something these tools do
# get_print_quote, update_print_quote, list_materials and 6 more
3D Printer on Demand costs nothing on mcprush: there is no plan to choose here, no cap to set and nothing mcprush can bill you for.
Publishernot claimed
AFAll 1 server
AFontana771 server
1 category
Collected from a public index. Nobody has claimed this account, so nothing here was written by its author — claim it if it is yours.
Installation
Where are you running it?
Every route below installs the same thing and ends at the same approval screen. Nothing here runs on your machine and nothing runs on ours: this server answers at its publisher’s own address, and what you install is the connection straight to it.
Claude Codedeclared by this listing
This is a public server: it answers at its publisher’s own address and this marketplace is not in the path. Claude Code registers it in one command; --scope user makes it available in every project. The transport below is http, as the publisher's own manifest declares it.
claude mcp add --scope user --transport http 3d-printer-on-demand-mcp https://3dprinterondemand.com/api/mcpReconnect, or start a new session, and the tools appear in the model’s tool list.
Free on mcprush, and it answers at its publisher’s own address: this marketplace is not in the path, so there is no key of ours to hold and no card to add.
What it writes
One config entry pointing straight at the publisher’s own address — this marketplace is not in the path, and nothing from this listing executes on your machine.
What you approve
9 tools, with what each one reads, writes and reaches shown before you agree — the same list on every route above. Read the tool surface.
Tool surface
What the model actually sees. Descriptions are diffed on every release — see version history.
Use this when someone wants a quote to have a 3D model (an STL, 3MF, STEP or OBJ file) printed and shipped by 3D Printer on Demand. It reads the attached file, checks that it can be printed, saves the quote, and returns the estimate with a private link that opens the saved quote on our website. When no file is attached, or the file type cannot be read, it returns a link to upload the file on our w
| Parameter | Type | Required | Notes |
|---|---|---|---|
| model_file | object | no | The STL, 3MF, STEP or OBJ file the user attached. |
| material | string | no | Material id, one of the listed values. Default petg. |
| color | string | no | Color name for the chosen material. Default is the material's first color. |
| quantity | integer | no | How many copies of the part. |
| part_description | string | no | What the user says this part is or what it is for, in their own words, if they said. Leave out if they did not. |
Use this when someone wants a different quantity or color on a quote 3D Printer on Demand already gave them. It takes that quote's private link and the new quantity, works out the estimate again from the file saved with the quote, saves it, and returns the new estimate with a new private link. The earlier link keeps the earlier quote. It does not take a new file, a different material, or a link th
| Parameter | Type | Required | Notes |
|---|---|---|---|
| quote_url | string | yes | The private quote link from an earlier quote in this chat. |
| quantity | integer | yes | The new number of copies of the part. |
| color | string | no | A new color for the same material. Leave out to keep the saved color. |
Use this when someone asks which plastics 3D Printer on Demand prints, which colors each comes in, which material suits a job, or which materials are quoted by a person. It returns each material with what it is for, what it is not advised for, its colors and how it is quoted, plus plain guidance on comparing them. It returns no engineering figures.
No parameter schema on file.
Use this when someone asks how 3D Printer on Demand works: lead time, shipping, how long a quote is held, accepted file types, the largest part, the items we refuse to print, or where to upload a file, request a review or get in touch. It returns these facts as our website publishes them.
No parameter schema on file.
Use this when someone attaches an STL, 3MF, STEP or OBJ file and wants to know whether it will 3D print well: size, walls, mesh problems and what to change. It reads the file, runs the same automatic design checks as our website, and stores nothing. It gives no quote. When no file is attached, it returns a link to upload the file on our website.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| model_file | object | no | The STL, 3MF, STEP or OBJ file the user attached. |
| material | string | no | Material id the part would be printed in, if the user named one, one of the listed values. |
| part_description | string | no | What the user says this part is or what it is for, in their own words, if they said. Leave out if they did not. |
Use this when someone asks how to design a part for FDM 3D printing: wall thickness, tolerances, hole clearances, overhangs and supports, orientation, infill, bosses, ribs, snap fits, threaded inserts, dimensional accuracy, published material figures, or printing compared with molding or machining. It takes a topic or the question and returns short answers with their published sources and a link t
| Parameter | Type | Required | Notes |
|---|---|---|---|
| topic | string | no | The engineering topic, when it is clear which one the user means. |
| question | string | no | The user's question in their own words. Used only to pick the topic and the most relevant answers. |
Use this when someone wants help choosing which of our plastics suits a part, from where it will be used: indoor or outdoor, heat, impact, flexing, chemicals, looks and material cost. It returns the materials we offer that fit, best match first, the reasons in plain words, and the ones ruled out and why. It does not rank materials by strength or stiffness, and it sends safety-critical parts to a p
| Parameter | Type | Required | Notes |
|---|---|---|---|
| environment | string | no | Where the part lives. Default indoor. |
| heat_exposure | string | no | How much heat the part sees in use. Default none. |
| impact | string | no | high when the part takes knocks or drops. |
| flexibility | string | no | flexible for parts that must bend and spring back, rigid for parts that must not. |
| chemical_exposure | string | no | Contact with oils, fuels, cleaners or solvents. Default none. |
| appearance | string | no | high when looks and color choice matter. |
| cost_sensitivity | string | no | high when keeping material cost low matters most. |
Use this when someone wants to compare 3D printing with injection molding for a quantity, using their own numbers: quantity, printed unit cost, tooling cost and molded unit cost. It returns the totals for each, the crossover quantity on those numbers, and the published range with sources. It makes up no cost, and when a number is missing it says which.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| quantity | integer | no | The total or yearly quantity to compare. |
| printed_unit_cost | number | no | The user's cost per printed part, in US dollars. |
| tooling_cost | number | no | What the mold costs, in US dollars. 0 if the user has no tooling quote yet. |
| molded_unit_cost | number | no | The user's cost per molded part once the tool exists, in US dollars. |
| tool_revisions | integer | no | Expected tool revisions. Default 0. |
| revision_cost | number | no | Cost per tool revision, in US dollars. |
| setup_cost | number | no | Setup or secondary cost per printed order, in US dollars. Default 0. |
Use this when someone asks what clearance or hole size to draw for a printed fit: a sliding part, a bolt or pin through a hole, two printed parts that mate, a press fit, or a snap fit. It returns published starting clearances and hole guidance, each with its source, and how to test the fit. It gives no single universal hole offset, because none is published.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| fit_type | string | no | What the fit is for: sliding-moving, bolt-clearance, pin-in-hole, mating-fdm-parts, press-interference or snap-fit. |
| hole_diameter_mm | number | no | The hole diameter the user plans to draw, in mm. |
| hole_axis | string | no | vertical-z when the hole goes through a top or bottom face, horizontal-xy when it goes through a side wall. |
Free
$0 forever
- Every tool — any call limit is its publisher’s, not ours
- No card, and mcprush charges nothing for it
- Runs at its publisher’s own address — this marketplace is not in the path
- Nothing to cap, because mcprush bills nothing
What counts against your monthly calls
| Tool | Unit | Calls used | Out of the allowance |
|---|
Nothing here is billable: mcprush charges nothing to install 3D Printer on Demand or to call it, at any volume.
Call allowance · this installenforced at the gateway
Monthly allowance, in calls
—
—
Alert at 80% · then the tool returns a normal MCP error
Used this month: —
—Grade not published
No rule-by-rule report on file for this release
Two independent axes, because powerful and malicious are different questions. The grade is threat only. The capability level is blast radius, and it is never a penalty on the grade — it is priced as one subtract-only term in the score, where you can see it.
This listing is an address its publisher runs, and you connect to it directly — this marketplace is not in the path. The scanner reads packages and public source, and an address is neither. So there is no grade — not a withheld one, an unmeasured one.
Release history
This is an address its publisher runs: which release it serves is theirs to choose, so there is nothing here to pin. The history below is for reading; the current release on file is 1.0.1.
1.0.1
undated
latestNo release note was published with this version.
—
no reviews yet
Who can review
One review per account, from a signed-in account that does not publish this listing. Nothing else is asked — you can say what you think before you install it. Publishers can reply once per review, and a review can be edited or deleted by whoever wrote it.
Sign in to write one
Any signed-in account that does not publish 3D Printer on Demand can review it, once — before installing it or after. A review from an account that has installed it is marked as one.
No reviews yet
Nobody has reviewed this listing. The rating on the card is the mean of the reviews written here and nothing else, so there is no rating until somebody writes the first — which takes a signed-in account that does not publish it, and nothing else.