Comprehensive Model Context Protocol server for managing Home Assistant through AI assistants.
Nothing to run from here
CalculPro — building calculation tools is installed from its publisher's own source and answers where it runs, so this marketplace is not in the path of a single call. There is no address here to send one to, and a panel that pretended otherwise would be showing you an answer we made up. Install it and call it from your own client — the Installation tab has the entry for each one.
2
tools declared
—
trust score
remote
at its publisher
—
calls last 7d
What it does
Building calculations (France): NF C 15-100 voltage drop and a catalogue of 111 tools.
Quickstart
# 1 — add it to Claude Code
claude mcp add --scope user --transport http calculpro-outils-de-calcul-du-batiment-mcp https://calculpro.fr/api/mcp
# 2 — ask your agent for something these tools do
# calculer_chute_de_tension, rechercher_outil
CalculPro — building calculation tools costs nothing on mcprush: there is no plan to choose here, no cap to set and nothing mcprush can bill you for.
Publishernot claimed
CAAll 1 server
calculpro1 server
1 category
Collected from a public index. Nobody has claimed this account, so nothing here was written by its author — claim it if it is yours.
Installation
Where are you running it?
Every route below installs the same thing and ends at the same approval screen. Nothing here runs on your machine and nothing runs on ours: this server answers at its publisher’s own address, and what you install is the connection straight to it.
Claude Codedeclared by this listing
This is a public server: it answers at its publisher’s own address and this marketplace is not in the path. Claude Code registers it in one command; --scope user makes it available in every project. The transport below is http, as the publisher's own manifest declares it.
claude mcp add --scope user --transport http calculpro-outils-de-calcul-du-batiment-mcp https://calculpro.fr/api/mcpReconnect, or start a new session, and the tools appear in the model’s tool list.
Free on mcprush, and it answers at its publisher’s own address: this marketplace is not in the path, so there is no key of ours to hold and no card to add.
What it writes
One config entry pointing straight at the publisher’s own address — this marketplace is not in the path, and nothing from this listing executes on your machine.
What you approve
2 tools, with what each one reads, writes and reaches shown before you agree — the same list on every route above. Read the tool surface.
Tool surface
What the model actually sees. Descriptions are diffed on every release — see version history.
Calcule la chute de tension d'une canalisation électrique basse tension et la confronte aux limites de la NF C 15-100 § 525, par la méthode du guide UTE C 15-105. Deux usages selon que la section est connue : - vérification — donnez section, l'outil rend un verdict de conformité ; - dimensionnement — omettez section, l'outil retient la plus petite section normalisée qui tient la limite. Renv
| Parameter | Type | Required | Notes |
|---|---|---|---|
| longueur | number | yes | Longueur simple de la canalisation, en mètres. Donnez la distance aller seulement : le trajet retour est déjà pris en compte. |
| courant | number | no | Courant d'emploi IB, en ampères. Renseignez soit le courant, soit la puissance. |
| puissance | number | no | Puissance active transportée, en kW. Alternative au courant d'emploi. |
| section | number | no | Section d'un conducteur, en mm². Omettez ce champ quand l'utilisateur cherche quelle section poser : l'outil bascule alors en dimensionnement. |
| reseau | string | no | Type de réseau : « mono » phase + neutre, « tri » triphasé (défaut), « dc » courant continu. |
| tension | number | no | Tension nominale, en volts — entre phases en triphasé. Défauts : 230 V en monophasé, 400 V en triphasé, 48 V en continu. |
| usage | string | no | « eclairage » pour un circuit d'éclairage, limite plus sévère ; « autre » pour prises, force et moteurs (défaut). |
| alimentation | string | no | Origine de l'installation. « reseau-bt » : branchement au réseau public basse tension, limites 3 % en éclairage et 5 % pour les autres usages — c'est le défaut, à la fois le cas le plus courant et le |
| materiau | string | no | Métal du conducteur (défaut : cuivre). |
| cos_phi | number | no | Facteur de puissance du récepteur (défaut 0,85). Sans effet en courant continu. |
| chute_amont | number | no | Chute de tension déjà consommée en amont, en %, pour chaîner plusieurs tronçons (défaut 0). |
| moteur_demarrage | boolean | no | Vérifier en plus la chute au démarrage d'un moteur asynchrone, sous cos φ 0,35 et une limite usuelle de 15 %. |
| rapport_id_in | number | no | Rapport courant de démarrage sur courant nominal du moteur (défaut 6 ; typiquement 5 à 8). |
Recherche un outil de calcul dans le catalogue CalculPro (120 outils : chauffage, plomberie, ventilation, électricité, structure et Eurocodes, isolation, acoustique, éclairage, menuiserie, accessibilité, gaz…). À appeler quand la demande relève d'un calcul du bâtiment qu'aucun autre outil de ce serveur ne couvre. Renvoie les outils pertinents avec leur adresse, pour orienter l'utilisateur vers le
| Parameter | Type | Required | Notes |
|---|---|---|---|
| requete | string | yes | Ce que l'utilisateur cherche à calculer, en français — par exemple « déperditions thermiques », « section de câble », « débit d'eau », « poutre acier ». |
| limite | integer | no | Nombre maximum d'outils à renvoyer (défaut 8). |
Free
$0 forever
- Every tool — any call limit is its publisher’s, not ours
- No card, and mcprush charges nothing for it
- Runs at its publisher’s own address — this marketplace is not in the path
- Nothing to cap, because mcprush bills nothing
What counts against your monthly calls
| Tool | Unit | Calls used | Out of the allowance |
|---|
Nothing here is billable: mcprush charges nothing to install CalculPro — building calculation tools or to call it, at any volume.
Call allowance · this installenforced at the gateway
Monthly allowance, in calls
—
—
Alert at 80% · then the tool returns a normal MCP error
Used this month: —
—Grade not published
No rule-by-rule report on file for this release
Two independent axes, because powerful and malicious are different questions. The grade is threat only. The capability level is blast radius, and it is never a penalty on the grade — it is priced as one subtract-only term in the score, where you can see it.
This listing is an address its publisher runs, and you connect to it directly — this marketplace is not in the path. The scanner reads packages and public source, and an address is neither. So there is no grade — not a withheld one, an unmeasured one.
Release history
This is an address its publisher runs: which release it serves is theirs to choose, so there is nothing here to pin. The history below is for reading; the current release on file is 1.0.0.
1.0.0
undated
latestNo release note was published with this version.
—
no reviews yet
Who can review
One review per account, from a signed-in account that does not publish this listing. Nothing else is asked — you can say what you think before you install it. Publishers can reply once per review, and a review can be edited or deleted by whoever wrote it.
Sign in to write one
Any signed-in account that does not publish CalculPro — building calculation tools can review it, once — before installing it or after. A review from an account that has installed it is marked as one.
No reviews yet
Nobody has reviewed this listing. The rating on the card is the mean of the reviews written here and nothing else, so there is no rating until somebody writes the first — which takes a signed-in account that does not publish it, and nothing else.