Comprehensive Model Context Protocol server for managing Home Assistant through AI assistants.
Nothing to run from here
Findingsteel Steel Sections is installed from its publisher's own source and answers where it runs, so this marketplace is not in the path of a single call. There is no address here to send one to, and a panel that pretended otherwise would be showing you an answer we made up. Install it and call it from your own client — the Installation tab has the entry for each one.
96/100
tool-list score
7
tools declared
remote
at its publisher
—
calls last 7d
What it does
Chinese (GB) standard steel section properties and theoretical weight lookup, search and calculator.
Quickstart
# 1 — add it to Claude Code
claude mcp add --scope user --transport http findingsteel-steel-sections-mcp https://www.findingsteel.com/mcp/
# 2 — ask your agent for something these tools do
# section_categories, section_search, section_lookup and 4 more
Findingsteel Steel Sections costs nothing on mcprush: there is no plan to choose here, no cap to set and nothing mcprush can bill you for.
Publishernot claimed
CCAll 1 server
cdaily1995-create1 server
1 category
Collected from a public index. Nobody has claimed this account, so nothing here was written by its author — claim it if it is yours.
Installation
Where are you running it?
Every route below installs the same thing and ends at the same approval screen. Nothing here runs on your machine and nothing runs on ours: this server answers at its publisher’s own address, and what you install is the connection straight to it.
Claude Codedeclared by this listing
This is a public server: it answers at its publisher’s own address and this marketplace is not in the path. Claude Code registers it in one command; --scope user makes it available in every project. The transport below is http, as the publisher's own manifest declares it.
claude mcp add --scope user --transport http findingsteel-steel-sections-mcp https://www.findingsteel.com/mcp/Reconnect, or start a new session, and the tools appear in the model’s tool list.
Free on mcprush, and it answers at its publisher’s own address: this marketplace is not in the path, so there is no key of ours to hold and no card to add.
What it writes
One config entry pointing straight at the publisher’s own address — this marketplace is not in the path, and nothing from this listing executes on your machine.
What you approve
7 tools, with what each one reads, writes and reaches shown before you agree — the same list on every route above. Read the tool surface.
Tool surface
What the model actually sees. Descriptions are diffed on every release — see version history.
列出国标型钢全部类别（HW/HM/HN、工字钢、槽钢、角钢、C/Z型钢、方管、矩形管）及库存规格总数。List all standard section categories and total count of stored specifications.
No parameter schema on file.
按类别（category）或关键词（query）搜索国标型钢规格，返回型号、标准、尺寸与每米重量。类别示例：HN / 工字钢 / 槽钢 / 等边角钢 / C型钢 / 方管。关键词可匹配型号片段，如 "HN400" 或 "200×200"。Search GB steel sections by category or keyword; returns designation, standard, dimensions, kg/m.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| category | string | no | 类别，如 HN / 工字钢 / 槽钢 / 等边角钢 / 不等边角钢 / C型钢 / Z型钢 / 方管 / 矩形管 |
| query | string | no | 型号或标准关键词片段，如 HN400 或 200×200 |
| limit | integer | no | 返回条数上限（默认 50） |
按精确型号查国标型钢截面特性：A(cm²)、Ix/Iy(cm⁴)、Wx/Wy(cm³)、ix/iy(cm)、每米重量 kg/m。型号写法用 × 分隔，如 HN400×200×8×13、HW250×250×9×14、L50×5、C140×50×20×2.5。Look up full section properties for an exact GB designation.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| designation | string | yes | 精确型号，如 HN400×200×8×13 |
由总高 hw、腹板厚 tw、翼缘宽 bf、翼缘厚 tf（mm）计算焊接工字形截面特性。Compute section properties of a welded I-section from plate dimensions (mm).
| Parameter | Type | Required | Notes |
|---|---|---|---|
| hw | number | yes | 腹板高/总高 mm |
| tw | number | yes | 腹板厚 mm |
| bf | number | yes | 翼缘宽 mm |
| tf | number | yes | 翼缘厚 mm |
由总高 h、总宽 b、腹板厚 tw、翼缘厚 tf（mm）计算焊接箱形截面特性。Compute section properties of a welded box section from plate dimensions (mm).
| Parameter | Type | Required | Notes |
|---|---|---|---|
| h | number | yes | 总高 mm |
| b | number | yes | 总宽 mm |
| tw | number | yes | 腹板厚 mm |
| tf | number | yes | 翼缘厚 mm |
计算常用钢材理论重量。shape 可选：plate钢板 / round圆钢 / square方钢 / flat扁钢 / hex六角钢 / oct八角钢 / rebar螺纹钢 / pipe圆管 / squareTube方管 / rectTube矩形管 / cProfile C型钢 / zProfile Z型钢 / weldedI焊接工字 / weldedBox焊接箱形 / standard国标型钢库（按型号）。尺寸单位 mm，长度 m。Calculate theoretical weight (kg/m, kg, tonnes) for common steel shapes or GB sections.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| shape | string | yes | 形状：plate/round/square/flat/hex/oct/rebar/pipe/squareTube/rectTube/cProfile/zProfile/weldedI/weldedBox/standard |
| dims | object | yes | 尺寸 mm：各形状所需键不同（见描述），如 plate 需 t/w/l，pipe 需 D/t，cProfile 需 h/b/c/t |
| lengthM | number | no | 长度 m（省略则只返回 kg/m） |
| quantity | integer | no | 数量（默认 1） |
| material | string | no | 材质键：q235/q355/ss304/ss316/aluminum/copper（默认碳钢 7.85） |
| customDensity | number | no | 自定义密度 g/cm³，覆盖 material |
| designation | string | no | shape=standard 时的国标型号，如 HN400×200×8×13 |
列出内置材质密度表（Q235/Q355、304、316、铝、铜）与默认值。List supported material densities.
No parameter schema on file.
Free
$0 forever
- Every tool — any call limit is its publisher’s, not ours
- No card, and mcprush charges nothing for it
- Runs at its publisher’s own address — this marketplace is not in the path
- Nothing to cap, because mcprush bills nothing
What counts against your monthly calls
| Tool | Unit | Calls used | Out of the allowance |
|---|
Nothing here is billable: mcprush charges nothing to install Findingsteel Steel Sections or to call it, at any volume.
Call allowance · this installenforced at the gateway
Monthly allowance, in calls
—
—
Alert at 80% · then the tool returns a normal MCP error
Used this month: —
ATool-list grade · score 96 / 100
Release 0.1.0 · scanned 24 Oct 2026
Graded from the tools this server lists, not from its source code.
Two independent axes, because powerful and malicious are different questions. The grade is threat only. The capability level is blast radius, and it is never a penalty on the grade — it is priced as one subtract-only term in the score, where you can see it.
Threat score100
Client score96
Findings0 threat · 0 capability
Capabilityminimal
Coveragemanifest
Verificationnot in this report
Surface digestb00647b8671b8a63b910572e7d9752473086a7c82f1efb8626709bbddac77409
Score vectorthreat 100 → client 96
| Term | Level | What it prices | Points |
|---|---|---|---|
| capability-exposure | minimal | capability blast radius (minimal) — client exposure if the model is manipulated | −0 |
| coverage-honesty | manifest | inspection depth (manifest) — how much of the target the scan could see | −4 |
score = clamp(round(threatScore − E_cap − E_ver − E_cov), 0, 100). No model, no opinion, no network call at scoring time: the same methodology version against the same bytes always produces this number, and every line above is a field of the report rather than a summary of it.
What the scan could actually read
A grade is only as meaningful as its coverage, so the scanner publishes its own depth before it publishes its result.
The scan read each tool’s name, description, input schema and annotations exactly as the server listed them the last time it answered us; no code was reviewed. We ask the server again about once a month, and a list that changed is graded again.
Tool surfaceread
Implementation sourcenot available
Package metadatanot available
Live transportnot available
The implementation source was not read — this reflects the declared tool metadata only.
Capability — what it could do if the model were manipulated
Tags derived from each tool’s schema and the implementation, not from what the tool calls itself. minimal is the level these add up to.
| Tool | Capability tags | Why the tag was assigned |
|---|---|---|
| section_categories | no tags | |
| section_search | no tags | |
| section_lookup | no tags | |
| section_welded_i | no tags | |
| section_welded_box | no tags | |
| weight_calculate | no tags | |
| weight_materials | no tags |
Toxic-flow graph
The lethal trifecta, checked as a graph rather than as a checklist: untrusted input, a sensitive source and an external sink have to meet before there is a path worth worrying about.
The public result for this release does not print the flow graph, so there is nothing to show here. That is not the same as "no paths were found": what the scan did read is above, under coverage.
Supply chain and provenance
Integrityfirst-seen
Surface digestb00647b8671b8a63
Scanned2026-10-24
This is the first scan of this surface here, so there is nothing yet to compare it against.
Every result on this tab comes from one deterministic pass over the published package — offline, rule by rule, and auditable line by line above. Same methodology version, same bytes, same score.
Release history
This is an address its publisher runs: which release it serves is theirs to choose, so there is nothing here to pin. The history below is for reading; the current release on file is 0.1.0.
0.1.0
undated
latestNo release note was published with this version.
—
no reviews yet
Who can review
One review per account, from a signed-in account that does not publish this listing. Nothing else is asked — you can say what you think before you install it. Publishers can reply once per review, and a review can be edited or deleted by whoever wrote it.
Sign in to write one
Any signed-in account that does not publish Findingsteel Steel Sections can review it, once — before installing it or after. A review from an account that has installed it is marked as one.
No reviews yet
Nobody has reviewed this listing. The rating on the card is the mean of the reviews written here and nothing else, so there is no rating until somebody writes the first — which takes a signed-in account that does not publish it, and nothing else.