Comprehensive Model Context Protocol server for managing Home Assistant through AI assistants.
Nothing to run from here
Dive Kit is installed from its publisher's own source and answers where it runs, so this marketplace is not in the path of a single call. There is no address here to send one to, and a panel that pretended otherwise would be showing you an answer we made up. Install it and call it from your own client — the Installation tab has the entry for each one.
18
tools declared
—
trust score
remote
at its publisher
—
calls last 7d
What it does
Experimental. Plan scuba decompression dives, gas blends and gas use with Dive Kit. Reference only.
Quickstart
# 1 — add it to Claude Code
claude mcp add --scope user --transport http dive-kit-mcp https://mcp.divekit.app/mcp
# 2 — ask your agent for something these tools do
# plan_dive, find_max_bottom_time, check_no_deco and 15 more
Dive Kit costs nothing on mcprush: there is no plan to choose here, no cap to set and nothing mcprush can bill you for.
Publishernot claimed
DIAll 1 server
divekit1 server
1 category
Collected from a public index. Nobody has claimed this account, so nothing here was written by its author — claim it if it is yours.
Installation
Where are you running it?
Every route below installs the same thing and ends at the same approval screen. Nothing here runs on your machine and nothing runs on ours: this server answers at its publisher’s own address, and what you install is the connection straight to it.
Claude Codedeclared by this listing
This is a public server: it answers at its publisher’s own address and this marketplace is not in the path. Claude Code registers it in one command; --scope user makes it available in every project. The transport below is http, as the publisher's own manifest declares it.
claude mcp add --scope user --transport http dive-kit-mcp https://mcp.divekit.app/mcpReconnect, or start a new session, and the tools appear in the model’s tool list.
Free on mcprush, and it answers at its publisher’s own address: this marketplace is not in the path, so there is no key of ours to hold and no card to add.
What it writes
One config entry pointing straight at the publisher’s own address — this marketplace is not in the path, and nothing from this listing executes on your machine.
What you approve
18 tools, with what each one reads, writes and reaches shown before you agree — the same list on every route above. Read the tool surface.
Tool surface
What the model actually sees. Descriptions are diffed on every release — see version history.
Computes the decompression plan for one dive, open circuit (OC) or closed-circuit rebreather (CCR): stop table, runtime, time to surface (TTS), gas used per cylinder, ascent pressure, CNS/OTU, gas density, warnings, contingencies, CCR bailout and a Dive Kit share link. Defaults unless given: GF 50/80, reserve thirds, SAC 20/15 L/min, last stop 6 m (20 ft), EN 13319 water, sea level. Use this when
No parameter schema on file.
Finds the longest whole-minute bottom time on one level of an open-circuit plan: the longest that keeps every cylinder at or above its reserve (limit reserve), whose time to surface fits a budget (limit tts), or that needs no stop (limit no_deco). Use this when a diver asks how long they can stay at a depth before gas runs short, how long fits a TTS budget, or how long a level of a multi-level pla
No parameter schema on file.
Use this when the diver asks how long they can stay at a depth without decompression stops (no-deco limit, NDL, no-stop time). Returns the minutes left after the descent at GF high, the PPO₂ of the gas there and its MOD at 1.4 bar, a safety-stop reminder and a Dive Kit share link. Suits beginners and recreational divers. Not for a full dive plan (plan_dive) or a gas-limited bottom time (find_max_b
No parameter schema on file.
Decodes a Dive Kit share link (https://divekit.app/share/deco-plan/...) into the plan_dive input it carries: profile, gases, CCR rig, settings, custom contingencies, modifiers and repetitive tissue state, in the requested units. Use this when a diver pastes a Dive Kit link and wants the plan recomputed or changed. Not for links from other apps, and not a schedule: it returns inputs. Results baked
No parameter schema on file.
Returns the facts for one breathing gas: maximum operating depth (MOD) at its Dive Kit PPO₂ band cap and at 1.4 bar, minimum depth for hypoxic mixes and, at a depth, PPO₂, equivalent narcotic depth (END), equivalent air depth (EAD) and gas density. Use this when the diver asks whether a gas is OK at a depth, its MOD, END, EAD or density. Not for planning a dive (plan_dive) or picking a gas (best_m
No parameter schema on file.
Use this when the diver asks what gas to breathe at a depth or which deco gases to carry: returns the richest bottom mix within a PPO₂ limit (default 1.4 bar) and an END limit (default 30 m, 98 ft), the nearest standard fill inside the same limits, and the standard deco gas ladder for that depth with switch depths. Not for checking one named gas (gas_specs) or planning the dive (plan_dive). The l
No parameter schema on file.
Returns one section of the Dive Kit planning guide as markdown. Use this when you need to explain a term, a warning or deco theory, or to check what a planning conversation needs: workflow, tool chains, every input with unit, default and range (inputs_reference), deco theory, gradient factors, gas choice, gas planning, gas consumption, blending, weighting, CCR, bailout and contingencies, every war
No parameter schema on file.
Returns scuba cylinders from Dive Kit's vetted open cylinder dataset: water volume, rated capacity, working pressure, material, typical use and, for five or fewer matches, weight, buoyancy and brands. Each row gives the plan_dive cylinder fields (a preset or cylinder_size) that describe it. Use this when a diver asks which cylinder something is, what it holds ("what's an HP100 in litres", "what do
No parameter schema on file.
Returns diving certifications from Dive Kit's vetted open dataset of agencies and courses: prerequisites, equivalent courses at other agencies, depth and gas limits, notes and links. Use this when a diver asks what a course allows ("what does PADI Tec 45 let me do"), what they need before a course ("what do I need before a trimix course"), whether two courses are equivalent ("is SSI X equivalent t
No parameter schema on file.
Converts one diving figure between units: pressure (bar, psi, MPa), volume (L, ft³), depth (m, ft), temperature (°C, °F, K), weight (kg, lb) and breathing rate (L/min, ft³/min, bar/min, psi/min). Use this when a diver gives a figure in the other unit system or asks what it reads in another unit. Returns the converted value and the factor used. Not for depth to pressure (gas_specs) or a cylinder's
No parameter schema on file.
Returns the gas one open-circuit cylinder spends over a planned profile: per segment the gas used (volume and pressure), what is left, the runtime and a status, plus the reserve, the turn pressure and the first segment that drops below each. Use this when a diver asks whether a cylinder covers a no-stop or multilevel dive, how much gas a dive uses, or their turn pressure. Not for decompression div
No parameter schema on file.
Returns the mix and pressure a cylinder ends with after gases are added in order: each addition's pressure and mix before and after, the cooling step, and the final O₂ %, He % and pressure. Use this when a diver or blender asks what a fill produced ("50 bar of air, 40 bar of oxygen, then air to 200"), or to check a plan_blend plan: send its mix_result_current as current and its mix_result_addition
No parameter schema on file.
Returns a partial-pressure blending plan from what a cylinder holds to a target mix and pressure: bleed, helium, oxygen and top-up steps with the gauge pressure to stop at, the mix after each step, the cooling step, the mix achieved, the gas drawn from each bank and alternative plans. Use this when a diver or blender asks how to fill nitrox or trimix ("fill my twin 12s to 21/35 from 60 bar of 18/4
No parameter schema on file.
Returns the settings for continuous-flow blending through a compressor intake: each feed gas's share of the intake flow, the analyzer readings to aim for after the first injection and at the end, and the pressure to bleed to first when the cylinder's gas is in the way. Use this when a blender fills with fixed air, oxygen and helium feeds (a nitrox stick or membrane) and asks what ratios or analyze
No parameter schema on file.
Returns what happens when two cylinders are joined with a transfill whip: the pressure both settle to, each cylinder's pressure and mix afterwards, and how much gas moved. With a target mix it also returns where to close the valve, the mix the receiver reaches and what the donor keeps, or why the target is out of reach. Use this when a diver tops up one cylinder from another ("top my 50 bar EANx32
No parameter schema on file.
Returns a diver's breathing rate measured from a logged dive: RMV (surface litres a minute, what plan_dive and gas_usage take) and SAC (pressure drop a minute on that cylinder), overall and per segment. Use this when a diver gives start and end pressures and asks their SAC, RMV or breathing rate. Give the cylinder's mix for trimix; air is assumed. Not for planning gas (gas_usage, plan_dive). Each
No parameter schema on file.
Returns a weighting check for one rig: how much lead to add or remove to be neutral at the end of the dive, the net buoyancy at the start (full cylinders at the target depth) and the end (near-empty cylinders at 3 m), what a flooded drysuit, a failed wing or a dropped stage would do and how to recover, and advisories. Use this when a diver asks how much weight they need, whether a rig is balanced,
No parameter schema on file.
Returns vetted references from Dive Kit's open references dataset, with links. Use this when a diver asks for a source. Call it before answering any question about deco theory, physiology, gas limits, blending practice, standards or training, so the answer names its source. Not for calculations. If nothing matches, the result lists where to search next; say that source is not Dive Kit-vetted. Eac
No parameter schema on file.
Free
$0 forever
- Every tool — any call limit is its publisher’s, not ours
- No card, and mcprush charges nothing for it
- Runs at its publisher’s own address — this marketplace is not in the path
- Nothing to cap, because mcprush bills nothing
What counts against your monthly calls
| Tool | Unit | Calls used | Out of the allowance |
|---|
Nothing here is billable: mcprush charges nothing to install Dive Kit or to call it, at any volume.
Call allowance · this installenforced at the gateway
Monthly allowance, in calls
—
—
Alert at 80% · then the tool returns a normal MCP error
Used this month: —
—Grade not published
No rule-by-rule report on file for this release
Two independent axes, because powerful and malicious are different questions. The grade is threat only. The capability level is blast radius, and it is never a penalty on the grade — it is priced as one subtract-only term in the score, where you can see it.
This listing is an address its publisher runs, and you connect to it directly — this marketplace is not in the path. The scanner reads packages and public source, and an address is neither. So there is no grade — not a withheld one, an unmeasured one.
Release history
This is an address its publisher runs: which release it serves is theirs to choose, so there is nothing here to pin. The history below is for reading; the current release on file is 0.4.3.
0.4.3
undated
latestNo release note was published with this version.
—
no reviews yet
Who can review
One review per account, from a signed-in account that does not publish this listing. Nothing else is asked — you can say what you think before you install it. Publishers can reply once per review, and a review can be edited or deleted by whoever wrote it.
Sign in to write one
Any signed-in account that does not publish Dive Kit can review it, once — before installing it or after. A review from an account that has installed it is marked as one.
No reviews yet
Nobody has reviewed this listing. The rating on the card is the mean of the reviews written here and nothing else, so there is no rating until somebody writes the first — which takes a signed-in account that does not publish it, and nothing else.