Model Context Protocol (MCP) server for freee API integration
Nothing to run from here
Base Onchain Tools is installed from its publisher's own source and answers where it runs, so this marketplace is not in the path of a single call. There is no address here to send one to, and a panel that pretended otherwise would be showing you an answer we made up. Install it and call it from your own client — the Installation tab has the entry for each one.
12
tools declared
—
trust score
remote
at its publisher
—
calls last 7d
What it does
Base mainnet analysis: contract audits, transfer simulation, token pricing. Paid via x402.
Quickstart
# 1 — add it to Claude Code
claude mcp add --scope user --transport http base-onchain-tools-mcp https://base-onchain-tools.dolerite.workers.dev/mcp
# 2 — ask your agent for something these tools do
# base_demo, base_address_check, base_tx_check and 9 more
Base Onchain Tools costs nothing on mcprush: there is no plan to choose here, no cap to set and nothing mcprush can bill you for.
Publishernot claimed
DOAll 1 server
dolerite1 server
1 category
Collected from a public index. Nobody has claimed this account, so nothing here was written by its author — claim it if it is yours.
Installation
Where are you running it?
Every route below installs the same thing and ends at the same approval screen. Nothing here runs on your machine and nothing runs on ours: this server answers at its publisher’s own address, and what you install is the connection straight to it.
Claude Codedeclared by this listing
This is a public server: it answers at its publisher’s own address and this marketplace is not in the path. Claude Code registers it in one command; --scope user makes it available in every project. The transport below is http, as the publisher's own manifest declares it.
claude mcp add --scope user --transport http base-onchain-tools-mcp https://base-onchain-tools.dolerite.workers.dev/mcpReconnect, or start a new session, and the tools appear in the model’s tool list.
Free on mcprush, and it answers at its publisher’s own address: this marketplace is not in the path, so there is no key of ours to hold and no card to add.
What it writes
One config entry pointing straight at the publisher’s own address — this marketplace is not in the path, and nothing from this listing executes on your machine.
What you approve
12 tools, with what each one reads, writes and reaches shown before you agree — the same list on every route above. Read the tool surface.
Tool surface
What the model actually sees. Descriptions are diffed on every release — see version history.
Free. Returns a complete, live contract audit of Base USDC — the same output shape as the paid audit tool, with the address fixed. Call this first to see what the paid tools return before spending anything.
No parameter schema on file.
Pre-flight check on a Base mainnet address before you pay it: contract vs EOA, ETH and USDC balances, outbound tx count, and warnings about whether funds sent there can actually be moved. Costs $0.002 per call, paid in USDC over x402 on Base. Calling this tool returns the payment requirements; failed calls are never billed.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| address | string | yes | Base mainnet address (0x-prefixed, 20 bytes) |
Confirm a Base mainnet transaction: success or reverted, block, confirmations and finality, gas used, and every ERC-20 transfer it moved with USDC amounts decoded. Costs $0.002 per call, paid in USDC over x402 on Base. Calling this tool returns the payment requirements; failed calls are never billed.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| hash | string | yes | Base mainnet transaction hash (0x-prefixed, 32 bytes) |
ERC-20 token metadata on Base mainnet: name, symbol, decimals and total supply, read straight from the contract. Costs $0.001 per call, paid in USDC over x402 on Base. Calling this tool returns the payment requirements; failed calls are never billed.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| address | string | yes | ERC-20 contract address on Base mainnet |
Live Base mainnet gas oracle: current gas price, base fee, recent base fee trend, priority fee percentiles, and the estimated cost of a plain ERC-20 transfer in ETH. Costs $0.001 per call, paid in USDC over x402 on Base. Calling this tool returns the payment requirements; failed calls are never billed.
No parameter schema on file.
ETH/USD and BTC/USD read live from Chainlink's on-chain price feeds on Base, with the feed's own description, decimals, update timestamp, age in seconds and a staleness flag. Costs $0.001 per call, paid in USDC over x402 on Base. Calling this tool returns the payment requirements; failed calls are never billed.
No parameter schema on file.
Identify what a Base contract actually is: ERC-20, ERC-721 or ERC-1155 via ERC-165, plus proxy detection across EIP-1967, EIP-1822 and the legacy ZeppelinOS slot with the current implementation address. Costs $0.002 per call, paid in USDC over x402 on Base. Calling this tool returns the payment requirements; failed calls are never billed.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| address | string | yes | Contract address on Base mainnet |
ERC-20 allowance on Base: how much a spender may pull from an owner, whether it is an unlimited approval, the owner balance, and how much is actually spendable right now. Defaults to USDC. Costs $0.001 per call, paid in USDC over x402 on Base. Calling this tool returns the payment requirements; failed calls are never billed.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| owner | string | yes | Token holder address |
| spender | string | yes | Address allowed to spend |
| token | string | no | Optional ERC-20 contract, defaults to USDC on Base |
USD price for ANY token on Base, not just the two assets Chainlink covers. Discovers every Uniswap V3 pool against WETH and USDC across all four fee tiers, reads sqrtPriceX96 and does the Q96 fixed-point maths, prices off the deepest pool, ignores deployed-but-never-traded pools, and cross-checks the remaining ones to flag thin or manipulated liquidity. Costs $0.006 per call, paid in USDC over x40
| Parameter | Type | Required | Notes |
|---|---|---|---|
| address | string | yes | ERC-20 token address on Base mainnet |
Will this token payment actually go through, and if not exactly why. Simulates the transfer without spending gas, decodes the real revert reason (Error(string), Panic codes translated to English, or a custom error selector), and separately reports balance and allowance blockers. Understands that a caller with no ETH is fine for gasless EIP-3009 or a sponsored relayer. Costs $0.008 per call, paid i
| Parameter | Type | Required | Notes |
|---|---|---|---|
| from | string | yes | Address the tokens leave |
| to | string | yes | Recipient address |
| amount | string | yes | Amount in atomic units (for USDC, 1000000 = $1) |
| token | string | no | Optional ERC-20 contract, defaults to USDC on Base |
| spender | string | no | Optional: simulate transferFrom pulled by this spender instead of a direct transfer |
What an UNVERIFIED Base contract can actually do — the case where block explorers show you nothing. Disassembles the deployed bytecode with a PUSH-aware opcode walk (a naive byte scan reports SELFDESTRUCT on contracts that cannot self-destruct), strips the Solidity metadata trailer, recovers the function selectors from the dispatch table and names them against a keccak-derived signature database,
| Parameter | Type | Required | Notes |
|---|---|---|---|
| address | string | yes | Contract address on Base mainnet |
| follow_proxy | string | no | Optional, default true. Set to false to audit the proxy's own bytecode instead of its implementation. |
ETH and USDC balances for up to 20 Base addresses in a single call, with per-address funded flags and totals. One request instead of forty RPC round trips. Costs $0.003 per call, paid in USDC over x402 on Base. Calling this tool returns the payment requirements; failed calls are never billed.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| addresses | string | yes | Comma-separated Base addresses, max 20 |
Free
$0 forever
- Every tool — any call limit is its publisher’s, not ours
- No card, and mcprush charges nothing for it
- Runs at its publisher’s own address — this marketplace is not in the path
- Nothing to cap, because mcprush bills nothing
What counts against your monthly calls
| Tool | Unit | Calls used | Out of the allowance |
|---|
Nothing here is billable: mcprush charges nothing to install Base Onchain Tools or to call it, at any volume.
Call allowance · this installenforced at the gateway
Monthly allowance, in calls
—
—
Alert at 80% · then the tool returns a normal MCP error
Used this month: —
—Grade not published
No rule-by-rule report on file for this release
Two independent axes, because powerful and malicious are different questions. The grade is threat only. The capability level is blast radius, and it is never a penalty on the grade — it is priced as one subtract-only term in the score, where you can see it.
This listing is an address its publisher runs, and you connect to it directly — this marketplace is not in the path. The scanner reads packages and public source, and an address is neither. So there is no grade — not a withheld one, an unmeasured one.
Release history
This is an address its publisher runs: which release it serves is theirs to choose, so there is nothing here to pin. The history below is for reading; the current release on file is 1.0.0.
1.0.0
undated
latestNo release note was published with this version.
—
no reviews yet
Who can review
One review per account, from a signed-in account that does not publish this listing. Nothing else is asked — you can say what you think before you install it. Publishers can reply once per review, and a review can be edited or deleted by whoever wrote it.
Sign in to write one
Any signed-in account that does not publish Base Onchain Tools can review it, once — before installing it or after. A review from an account that has installed it is marked as one.
No reviews yet
Nobody has reviewed this listing. The rating on the card is the mean of the reviews written here and nothing else, so there is no rating until somebody writes the first — which takes a signed-in account that does not publish it, and nothing else.