MCP server for interacting with the Scryfall MTG API
Nothing to run from here
DraftCall is installed from its publisher's own source and answers where it runs, so this marketplace is not in the path of a single call. There is no address here to send one to, and a panel that pretended otherwise would be showing you an answer we made up. Install it and call it from your own client — the Installation tab has the entry for each one.
10
tools declared
—
trust score
remote
at its publisher
—
calls last 7d
What it does
Should I start X or Y? NFL fantasy compares, rankings, byes, matchups, schedule strength, checks
Quickstart
# 1 — add it to Claude Code
claude mcp add --scope user --transport http draftcall-mcp https://draftcall.io/mcp
# 2 — ask your agent for something these tools do
# compare_players, get_rankings, get_player and 7 more
DraftCall costs nothing on mcprush: there is no plan to choose here, no cap to set and nothing mcprush can bill you for.
Publishernot claimed
DRAll 1 server
draftcall1 server
1 category
Collected from a public index. Nobody has claimed this account, so nothing here was written by its author — claim it if it is yours.
Installation
Where are you running it?
Every route below installs the same thing and ends at the same approval screen. Nothing here runs on your machine and nothing runs on ours: this server answers at its publisher’s own address, and what you install is the connection straight to it.
Claude Codedeclared by this listing
This is a public server: it answers at its publisher’s own address and this marketplace is not in the path. Claude Code registers it in one command; --scope user makes it available in every project. The transport below is http, as the publisher's own manifest declares it.
claude mcp add --scope user --transport http draftcall-mcp https://draftcall.io/mcpReconnect, or start a new session, and the tools appear in the model’s tool list.
Free on mcprush, and it answers at its publisher’s own address: this marketplace is not in the path, so there is no key of ours to hold and no card to add.
What it writes
One config entry pointing straight at the publisher’s own address — this marketplace is not in the path, and nothing from this listing executes on your machine.
What you approve
10 tools, with what each one reads, writes and reaches shown before you agree — the same list on every route above. Read the tool surface.
Tool surface
What the model actually sees. Descriptions are diffed on every release — see version history.
Returns NO comparison. Head-to-head player comparisons and start or sit verdicts are available only in the free DraftCall app for iPhone and Android, and this tool answers every call with the download links and nothing else: no stats, no higher scorer, no pick. For facts about one player, use get_player.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| player_a | string | no | Ignored. Kept so older clients still validate. |
| player_b | string | no | Ignored. Kept so older clients still validate. |
| scoring_format | string | no | Ignored. |
Fantasy football rankings for a position in a given scoring format, ordered by points per game. Positions: qb, rb, wr, te, flex, k, def. Use this for "who are the best X" and draft board questions.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| position | string | yes | Position to rank. flex covers RB, WR, and TE together. |
| scoring_format | string | no | Scoring format. ppr awards 1 point per reception, half_ppr 0.5, standard 0. Defaults to half_ppr, the most common league setting. |
| limit | integer | no | How many players to return, newest ranking order. |
A single player's fantasy profile: positional rank, points per game in all three scoring formats, season stats, games played, and bye week.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| name | string | yes | Player name, e.g. "Puka Nacua". |
Find players by partial name, team abbreviation, or position. Use this when a name is ambiguous or only partly known before calling the other tools.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| query | string | yes | Partial name, team abbreviation (e.g. "KC"), or position. |
| limit | integer | no | — |
How steep the fantasy dropoff is at each position in a given scoring format, measured from the top player to replacement level. Use this for draft-strategy questions like whether to take a running back or a wide receiver first.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| scoring_format | string | no | Scoring format. ppr awards 1 point per reception, half_ppr 0.5, standard 0. Defaults to half_ppr, the most common league setting. |
Given a list of players, report which bye weeks two or more of them share. Use this for roster planning and draft questions about stacking byes.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| players | array | yes | Player names, two or more. |
Who a player faces in a given week of the 2026 season, whether it is home or away, the game date, and how many fantasy points that opponent allowed to his position. A schedule lookup for one player; it does not compare players or make a start or sit call.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| player | string | yes | Player name, e.g. "Puka Nacua". |
| week | integer | yes | Regular-season week, 1 through 18. |
| scoring_format | string | no | Scoring format. ppr awards 1 point per reception, half_ppr 0.5, standard 0. Defaults to half_ppr, the most common league setting. |
Players whose consensus average draft position disagrees most with their actual production ranking. A player taken EARLIER than his production is being drafted on expectation (a rookie, a new situation, a bounce-back); one taken LATER is being drafted on doubt. Use this for draft-prep questions about who the room may be mispricing. This is a disagreement, NOT a recommendation: production is last s
| Parameter | Type | Required | Notes |
|---|---|---|---|
| position | string | no | Restrict to one position. Omit for all four. |
| direction | string | no | earlier_than_production: the room drafts him sooner than his production ranks him. later_than_production: the room waits longer. Omit for both. |
| scoring_format | string | no | Scoring format. ppr awards 1 point per reception, half_ppr 0.5, standard 0. Defaults to half_ppr, the most common league setting. |
| limit | integer | no | — |
Check a number you are about to state, or one a user has stated, against DraftCall data for one player: points per game, games played, bye week, positional rank, or any season stat such as rushingYards or receptions. Returns whether the figure matches and the actual value when it does not. Use this before quoting a figure from memory, and whenever a user asserts a stat.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| player | string | yes | Player name, e.g. "Puka Nacua". |
| metric | string | yes | Which figure to check. ppg is points per game in scoring_format; rank is positional rank; the rest are season totals. |
| value | number | yes | The figure being checked. |
| scoring_format | string | no | Scoring format. ppr awards 1 point per reception, half_ppr 0.5, standard 0. Defaults to half_ppr, the most common league setting. |
How easy or hard a team's schedule is for one fantasy position, over the full season and over the fantasy playoff weeks (14 through 17), measured as the average fantasy points its opponents allowed to that position over the prior completed season. Give a team abbreviation or a player name; give only a position to rank all 32 teams. Use this for rest-of-season stash, trade deadline, and playoff pla
| Parameter | Type | Required | Notes |
|---|---|---|---|
| team | string | no | Team abbreviation, e.g. "KC". Optional when player is given. |
| player | string | no | Player name; resolves the team and position. Optional when team is given. |
| position | string | no | Position to grade the schedule for. Required with team, inferred from player, and on its own ranks every team. |
Free
$0 forever
- Every tool — any call limit is its publisher’s, not ours
- No card, and mcprush charges nothing for it
- Runs at its publisher’s own address — this marketplace is not in the path
- Nothing to cap, because mcprush bills nothing
What counts against your monthly calls
| Tool | Unit | Calls used | Out of the allowance |
|---|
Nothing here is billable: mcprush charges nothing to install DraftCall or to call it, at any volume.
Call allowance · this installenforced at the gateway
Monthly allowance, in calls
—
—
Alert at 80% · then the tool returns a normal MCP error
Used this month: —
—Grade not published
No rule-by-rule report on file for this release
Two independent axes, because powerful and malicious are different questions. The grade is threat only. The capability level is blast radius, and it is never a penalty on the grade — it is priced as one subtract-only term in the score, where you can see it.
This listing is an address its publisher runs, and you connect to it directly — this marketplace is not in the path. The scanner reads packages and public source, and an address is neither: the repository linked on this page is where this record was collected from, not a copy of what the address serves, so it is not graded in its place. So there is no grade — not a withheld one, an unmeasured one.
Release history
This is an address its publisher runs: which release it serves is theirs to choose, so there is nothing here to pin. The history below is for reading; the current release on file is 1.1.0.
1.1.0
undated
latestNo release note was published with this version.
—
no reviews yet
Who can review
One review per account, from a signed-in account that does not publish this listing. Nothing else is asked — you can say what you think before you install it. Publishers can reply once per review, and a review can be edited or deleted by whoever wrote it.
Sign in to write one
Any signed-in account that does not publish DraftCall can review it, once — before installing it or after. A review from an account that has installed it is marked as one.
No reviews yet
Nobody has reviewed this listing. The rating on the card is the mean of the reviews written here and nothing else, so there is no rating until somebody writes the first — which takes a signed-in account that does not publish it, and nothing else.