Comprehensive Model Context Protocol server for managing Home Assistant through AI assistants.
Nothing to run from here
DrapeCut is installed from its publisher's own source and answers where it runs, so this marketplace is not in the path of a single call. There is no address here to send one to, and a panel that pretended otherwise would be showing you an answer we made up. Install it and call it from your own client — the Installation tab has the entry for each one.
16
tools declared
—
trust score
remote
at its publisher
—
calls last 7d
What it does
Simulate composite fabric draping on CAD surfaces; compare fibre angles and export DXF/PDF patterns.
Quickstart
# 1 — add it to Claude Code
claude mcp add --scope user --transport http drapecut-mcp https://drapecut.com/mcp
# 2 — ask your agent for something these tools do
# create_workspace, list_uploads, compare_drapes and 13 more
DrapeCut costs nothing on mcprush: there is no plan to choose here, no cap to set and nothing mcprush can bill you for.
Publishernot claimed
DRAll 1 server
drapecut1 server
1 category
Collected from a public index. Nobody has claimed this account, so nothing here was written by its author — claim it if it is yours.
Installation
Where are you running it?
Every route below installs the same thing and ends at the same approval screen. Nothing here runs on your machine and nothing runs on ours: this server answers at its publisher’s own address, and what you install is the connection straight to it.
Claude Codedeclared by this listing
This is a public server: it answers at its publisher’s own address and this marketplace is not in the path. Claude Code registers it in one command; --scope user makes it available in every project. The transport below is http, as the publisher's own manifest declares it.
claude mcp add --scope user --transport http drapecut-mcp https://drapecut.com/mcpReconnect, or start a new session, and the tools appear in the model’s tool list.
Free on mcprush, and it answers at its publisher’s own address: this marketplace is not in the path, so there is no key of ours to hold and no card to add.
What it writes
One config entry pointing straight at the publisher’s own address — this marketplace is not in the path, and nothing from this listing executes on your machine.
What you approve
16 tools, with what each one reads, writes and reaches shown before you agree — the same list on every route above. Read the tool surface.
Tool surface
What the model actually sees. Descriptions are diffed on every release — see version history.
Create a private two-hour workspace and return its ID and CAD upload page. Start here before loading a sample or importing a user's CAD part. The ID and upload/download links grant access; do not publish them.
No parameter schema on file.
List files uploaded through this workspace's upload_url; pass an upload_id to import_part.
No parameter schema on file.
Compare up to 12 warp angles, sequentially, at one fixed seed and cloth configuration. When omitted, seed is suggested once for the first angle. Results rank by coverage descending, then percentage above lock ascending, then maximum shear ascending. This is a stated comparison rule, not a global optimum. Runs use the requested/preset pitch, never a hidden coarse ap
No parameter schema on file.
Start covering one surface with multiple pieces of the same ply/fabric. This is not a laminate stack. overlap is mm; supplied seeds are laid first and additional pieces fill remaining ground, up to max_pieces. Poll the returned job_id with get_job(kind='layout'); export with layout=true.
No parameter schema on file.
Export a result as DXF or tiled 1:1 PDF and return a temporary download_url for the user. Use layout=true with a layout_id to export all pieces. Download before workspace expiry.
No parameter schema on file.
Poll STEP import or multi-piece layout; retry after a short delay while done=false. STEP completion returns a step_id and at most 20 basic face descriptions; use list_faces for geometric descriptions and pagination. Layout completion returns compact per-piece statistics and a layout_id for export_pattern.
No parameter schema on file.
Import a file already uploaded to this workspace. Get upload_id from list_uploads. STEP/STP returns a job to poll with get_job(kind='step'), then inspect and select faces.
No parameter schema on file.
List fabric IDs, nominal locking angles, tow pitch (mm), thickness and UD settings.
No parameter schema on file.
Inspect STEP face IDs, areas, bounds, centroids, neighbours and planar mesh normals. This requires the MCP face-metadata endpoint in the configured backend. Centroids/bounds describe the tessellation; do not assume a closed solid's entire skin is the intended draping surface. Ask for explicit face IDs when the intended surface cannot be identified from this informa
No parameter schema on file.
List built-in example parts that can be loaded without uploading a file.
No parameter schema on file.
Register a built-in sample and return a mesh_id for draping.
No parameter schema on file.
Inspect seed landmarks in mm, paged within each category (max 100 per category). Returns centre, corners, edge midpoints and origin intersections. Full section polylines are omitted. Follow next_offset for more points.
No parameter schema on file.
Drape one fabric at one warp angle (degrees); return statistics and an exportable result_id. Omitted seed is suggested on the surface. Omitted pitch/lock_angle use the fabric preset, including its UD spread/compression settings. pitch/offset are mm; hole_area is mm² (null bridges holes). The API may increase pitch to bound the grid; pitch_used reports the actual re
No parameter schema on file.
Create a drapable mesh from explicitly chosen STEP face IDs; reports connectedness.
No parameter schema on file.
Check the hosted DrapeCut solver and read connection/workspace limits.
No parameter schema on file.
Suggest a starting point on a mesh. Validate its coverage with an actual drape.
No parameter schema on file.
Free
$0 forever
- Every tool — any call limit is its publisher’s, not ours
- No card, and mcprush charges nothing for it
- Runs at its publisher’s own address — this marketplace is not in the path
- Nothing to cap, because mcprush bills nothing
What counts against your monthly calls
| Tool | Unit | Calls used | Out of the allowance |
|---|
Nothing here is billable: mcprush charges nothing to install DrapeCut or to call it, at any volume.
Call allowance · this installenforced at the gateway
Monthly allowance, in calls
—
—
Alert at 80% · then the tool returns a normal MCP error
Used this month: —
—Grade not published
No rule-by-rule report on file for this release
Two independent axes, because powerful and malicious are different questions. The grade is threat only. The capability level is blast radius, and it is never a penalty on the grade — it is priced as one subtract-only term in the score, where you can see it.
This listing is an address its publisher runs, and you connect to it directly — this marketplace is not in the path. The scanner reads packages and public source, and an address is neither. So there is no grade — not a withheld one, an unmeasured one.
Release history
This is an address its publisher runs: which release it serves is theirs to choose, so there is nothing here to pin. The history below is for reading; the current release on file is 0.2.0.
0.2.0
undated
latestNo release note was published with this version.
—
no reviews yet
Who can review
One review per account, from a signed-in account that does not publish this listing. Nothing else is asked — you can say what you think before you install it. Publishers can reply once per review, and a review can be edited or deleted by whoever wrote it.
Sign in to write one
Any signed-in account that does not publish DrapeCut can review it, once — before installing it or after. A review from an account that has installed it is marked as one.
No reviews yet
Nobody has reviewed this listing. The rating on the card is the mean of the reviews written here and nothing else, so there is no rating until somebody writes the first — which takes a signed-in account that does not publish it, and nothing else.