Blender integration through the Model Context Protocol
Nothing to run from here
Extrabold Tools Gridfinity is installed from its publisher's own source and answers where it runs, so this marketplace is not in the path of a single call. There is no address here to send one to, and a panel that pretended otherwise would be showing you an answer we made up. Install it and call it from your own client — the Installation tab has the entry for each one.
7
tools declared
—
trust score
remote
at its publisher
—
calls last 7d
What it does
Find drawer presets and create printer-aware Gridfinity baseplate configurations.
Quickstart
# 1 — add it to Claude Code
claude mcp add --scope user --transport http extrabold-tools-gridfinity-mcp https://mcp.extrabold.tools/mcp
# 2 — ask your agent for something these tools do
# find_gridfinity_printers, find_gridfinity_drawer_presets, generate_gridfinity_baseplate and 4 more
Extrabold Tools Gridfinity costs nothing on mcprush: there is no plan to choose here, no cap to set and nothing mcprush can bill you for.
Publishernot claimed
EXAll 1 server
extrabold1 server
1 category
Collected from a public index. Nobody has claimed this account, so nothing here was written by its author — claim it if it is yours.
Installation
Where are you running it?
Every route below installs the same thing and ends at the same approval screen. Nothing here runs on your machine and nothing runs on ours: this server answers at its publisher’s own address, and what you install is the connection straight to it.
Claude Codedeclared by this listing
This is a public server: it answers at its publisher’s own address and this marketplace is not in the path. Claude Code registers it in one command; --scope user makes it available in every project. The transport below is http, as the publisher's own manifest declares it.
claude mcp add --scope user --transport http extrabold-tools-gridfinity-mcp https://mcp.extrabold.tools/mcpReconnect, or start a new session, and the tools appear in the model’s tool list.
Free on mcprush, and it answers at its publisher’s own address: this marketplace is not in the path, so there is no key of ours to hold and no card to add.
What it writes
One config entry pointing straight at the publisher’s own address — this marketplace is not in the path, and nothing from this listing executes on your machine.
What you approve
7 tools, with what each one reads, writes and reaches shown before you agree — the same list on every route above. Read the tool surface.
Tool surface
What the model actually sees. Descriptions are diffed on every release — see version history.
Look up a named 3D printer in the Extrabold Tools catalog. Returns exact model IDs and printerBuildVolume objects ready for generation tools. Ask the user to choose when several models match.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| query | string | yes | Printer model, brand, or exact catalog ID, such as Bambu Lab P2S. |
| limit | integer | no | — |
Find usable Extrabold Tools drawer presets and exact Eurobox or KLT models by product name, brand, product line, dimensions, or article number.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| query | string | yes | Drawer, exact Eurobox, or exact KLT name; brand; product line; article number; dimensions; or other search text. |
| limit | integer | no | — |
Configure a Gridfinity baseplate from exact width and depth in millimeters, without a drawer preset. Returns the full-unit grid, leftover margins, printer fit, warnings, and a website URL. Supply printerBuildVolume from find_gridfinity_printers to enable automatic splitting.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| gridUnitWidth | number | no | Width of one grid unit in millimeters. Standard Gridfinity uses 42. |
| gridUnitDepth | number | no | Depth of one grid unit in millimeters. Standard Gridfinity uses 42. |
| baseplateType | string | no | Baseplate style to generate. |
| tolerance | string | no | Experimental fit setting saved per printer. For dovetails, 0 mm gives the largest male tab; higher values make it smaller, up to 0.5 mm. Also affects CLICKbase clips and magnet holes. Print the tolera |
| toggleMagnets | boolean | no | — |
| magnetHoleStyle | string | no | Round holes are sized with the magnet diameter. Crush ribs use a wavy profile with flexible ribs that grip the magnet. |
| magnetDirection | string | no | Which side of the baseplate magnets are inserted from. |
| magnetDiameter | number | no | Diameter of the magnets in millimeters. |
| magnetHeight | number | no | Height or thickness of the magnets in millimeters. |
| toggleMagnetReleaseHole | boolean | no | Add through-holes so magnets can be pushed back out from the opposite side. |
| toggleScrewHoles | boolean | no | — |
| screwHoleSize | number | no | Diameter of the screw shaft in millimeters. |
| screwHeadSize | number | no | Diameter of the screw head in millimeters. |
| removeHolesOnSplitLines | boolean | no | Remove screw holes that fall on split edges. |
| marginType | string | no | — |
| borderRadius | number | no | — |
| splitToBuildplates | boolean | no | Override automatic printer-fit splitting. When omitted with a printer build volume, splitting is enabled only when needed. |
| splitOffMargins | boolean | no | Create outer margins as separate strips while keeping corners attached to top or bottom strips. |
| plateMarginMm | number | no | — |
| splitStrategy | string | no | — |
Generate a Gridfinity baseplate sized to a known drawer preset. Supply measured drawer dimensions when available and the printer build volume; the tool automatically enables build-plate splitting when the baseplate does not fit.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| drawerPresetId | string | yes | Exact preset id returned by find_gridfinity_drawer_presets. |
| measuredDimensions | object | no | Measured drawer interior dimensions in millimeters. These override the approximate preset dimensions. |
| printerBuildVolume | object | yes | The printer build volume used to decide whether this drawer-sized baseplate must be split. |
| gridUnitWidth | number | no | — |
| gridUnitDepth | number | no | — |
| baseplateType | string | no | — |
| tolerance | string | no | Experimental fit setting saved per printer. For dovetails, 0 mm gives the largest male tab; higher values make it smaller, up to 0.5 mm. Also affects CLICKbase clips and magnet holes. Print the tolera |
| toggleMagnets | boolean | no | — |
| magnetHoleStyle | string | no | — |
| magnetDirection | string | no | — |
| magnetDiameter | number | no | — |
| magnetHeight | number | no | — |
| toggleMagnetReleaseHole | boolean | no | — |
| toggleScrewHoles | boolean | no | — |
| screwHoleSize | number | no | — |
| screwHeadSize | number | no | — |
| removeHolesOnSplitLines | boolean | no | — |
| marginType | string | no | — |
| borderRadius | number | no | — |
| splitToBuildplates | boolean | no | Override the automatic printer-fit split decision. |
Return the next Gridfinity baseplate configuration questions to ask, using Extrabold Tools setting descriptions and dependencies.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| columns | integer | no | — |
| rows | integer | no | — |
| gridUnitWidth | number | no | — |
| gridUnitDepth | number | no | — |
| baseplateType | string | no | — |
| tolerance | string | no | Experimental fit setting saved per printer. For dovetails, 0 mm gives the largest male tab; higher values make it smaller, up to 0.5 mm. Also affects CLICKbase clips and magnet holes. Print the tolera |
| toggleMagnets | boolean | no | — |
| magnetHoleStyle | string | no | — |
| magnetDirection | string | no | — |
| magnetDiameter | number | no | — |
| magnetHeight | number | no | — |
| toggleMagnetReleaseHole | boolean | no | — |
| toggleScrewHoles | boolean | no | — |
| screwHoleSize | number | no | — |
| screwHeadSize | number | no | — |
| removeHolesOnSplitLines | boolean | no | — |
| marginType | string | no | — |
| borderRadius | number | no | — |
| splitToBuildplates | boolean | no | — |
| splitOffMargins | boolean | no | — |
Generate a Gridfinity baseplate grid by columns and rows, returning the calculated millimeter dimensions and a shareable Extrabold Tools URL.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| columns | integer | yes | Number of Gridfinity columns across the width. |
| rows | integer | yes | Number of Gridfinity rows across the depth. |
| gridUnitWidth | number | no | Width of one grid unit in millimeters. Standard Gridfinity uses 42. |
| gridUnitDepth | number | no | Depth of one grid unit in millimeters. Standard Gridfinity uses 42. |
| baseplateType | string | no | Baseplate style to generate. |
| tolerance | string | no | Experimental fit setting saved per printer. For dovetails, 0 mm gives the largest male tab; higher values make it smaller, up to 0.5 mm. Also affects CLICKbase clips and magnet holes. Print the tolera |
| toggleMagnets | boolean | no | — |
| magnetHoleStyle | string | no | Round holes are sized with the magnet diameter. Crush ribs use a wavy profile with flexible ribs that grip the magnet. |
| magnetDirection | string | no | Which side of the baseplate magnets are inserted from. |
| magnetDiameter | number | no | Diameter of the magnets in millimeters. |
| magnetHeight | number | no | Height or thickness of the magnets in millimeters. |
| toggleMagnetReleaseHole | boolean | no | Add through-holes so magnets can be pushed back out from the opposite side. |
| toggleScrewHoles | boolean | no | — |
| screwHoleSize | number | no | Diameter of the screw shaft in millimeters. |
| screwHeadSize | number | no | Diameter of the screw head in millimeters. |
| removeHolesOnSplitLines | boolean | no | Remove screw holes that fall on split edges. |
| marginType | string | no | — |
| borderRadius | number | no | — |
| splitToBuildplates | boolean | no | Override automatic printer-fit splitting. When omitted with a printer build volume, splitting is enabled only when needed. |
| splitOffMargins | boolean | no | Create outer margins as separate strips while keeping corners attached to top or bottom strips. |
Create a shareable Extrabold Tools Gridfinity baseplate URL from exact baseplate settings. Use generate_gridfinity_grid when the user asks for a grid by rows and columns.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| baseplateType | string | no | — |
| tolerance | string | no | Experimental fit setting saved per printer. For dovetails, 0 mm gives the largest male tab; higher values make it smaller, up to 0.5 mm. Also affects CLICKbase clips and magnet holes. Print the tolera |
| dimensions | object | no | — |
| sizingMode | string | no | — |
| containerPresetId | string | no | — |
| gridAlignment | object | no | — |
| marginType | string | no | — |
| toggleMagnets | boolean | no | — |
| magnetHoleStyle | string | no | — |
| magnetDirection | string | no | — |
| magnetDiameter | number | no | — |
| magnetHeight | number | no | — |
| toggleMagnetReleaseHole | boolean | no | — |
| toggleScrewHoles | boolean | no | — |
| screwHoleSize | number | no | — |
| screwHeadSize | number | no | — |
| removeHolesOnSplitLines | boolean | no | — |
| splitToBuildplates | boolean | no | — |
| splitOffMargins | boolean | no | — |
| plateMarginMm | number | no | — |
Free
$0 forever
- Every tool — any call limit is its publisher’s, not ours
- No card, and mcprush charges nothing for it
- Runs at its publisher’s own address — this marketplace is not in the path
- Nothing to cap, because mcprush bills nothing
What counts against your monthly calls
| Tool | Unit | Calls used | Out of the allowance |
|---|
Nothing here is billable: mcprush charges nothing to install Extrabold Tools Gridfinity or to call it, at any volume.
Call allowance · this installenforced at the gateway
Monthly allowance, in calls
—
—
Alert at 80% · then the tool returns a normal MCP error
Used this month: —
—Grade not published
No rule-by-rule report on file for this release
Two independent axes, because powerful and malicious are different questions. The grade is threat only. The capability level is blast radius, and it is never a penalty on the grade — it is priced as one subtract-only term in the score, where you can see it.
This listing is an address its publisher runs, and you connect to it directly — this marketplace is not in the path. The scanner reads packages and public source, and an address is neither. So there is no grade — not a withheld one, an unmeasured one.
Release history
This is an address its publisher runs: which release it serves is theirs to choose, so there is nothing here to pin. The history below is for reading; the current release on file is 0.1.0.
0.1.0
undated
latestNo release note was published with this version.
—
no reviews yet
Who can review
One review per account, from a signed-in account that does not publish this listing. Nothing else is asked — you can say what you think before you install it. Publishers can reply once per review, and a review can be edited or deleted by whoever wrote it.
Sign in to write one
Any signed-in account that does not publish Extrabold Tools Gridfinity can review it, once — before installing it or after. A review from an account that has installed it is marked as one.
No reviews yet
Nobody has reviewed this listing. The rating on the card is the mean of the reviews written here and nothing else, so there is no rating until somebody writes the first — which takes a signed-in account that does not publish it, and nothing else.