Polymarket and Predict.fun historical tick data, plus backtest quotes and status, over MCP
Folionomiq is installed from its publisher's own source and answers where it runs, so this marketplace is not in the path of a single call. There is no address here to send one to, and a panel that pretended otherwise would be showing you an answer we made up. Install it and call it from your own client — the Installation tab has the entry for each one.
What it does
Measures a portfolio from price history: real bets, look-through, past crises in money. No advice.
Quickstart
# 1 — add it to Claude Code
claude mcp add --scope user --transport http folionomiq-mcp https://folionomiq.com/mcp
# 2 — ask your agent for something these tools do
# measure_portfolio, compare_portfolios, test_a_change and 19 more
Folionomiq costs nothing on mcprush: there is no plan to choose here, no cap to set and nothing mcprush can bill you for.
Collected from a public index. Nobody has claimed this account, so nothing here was written by its author — claim it if it is yours.
Where are you running it?
Every route below installs the same thing and ends at the same approval screen. Nothing here runs on your machine and nothing runs on ours: this server answers at its publisher’s own address, and what you install is the connection straight to it.
This is a public server: it answers at its publisher’s own address and this marketplace is not in the path. Claude Code registers it in one command; --scope user makes it available in every project. The transport below is http, as the publisher's own manifest declares it.
claude mcp add --scope user --transport http folionomiq-mcp https://folionomiq.com/mcpReconnect, or start a new session, and the tools appear in the model’s tool list.
One config entry pointing straight at the publisher’s own address — this marketplace is not in the path, and nothing from this listing executes on your machine.
22 tools, with what each one reads, writes and reaches shown before you agree — the same list on every route above. Read the tool surface.
Tool surface
What the model actually sees. Descriptions are diffed on every release — see version history.
The complete measurement of one portfolio in a single call: how many independent bets it holds, which holding carries risk out of line with its money, the companies owned through its funds, what past crises did to it and how long it took to come back, and the numbered report. Use it when the reader asks broadly about a portfolio; for one question the narrower tools
| Parameter | Type | Required | Notes |
|---|---|---|---|
| holdings | object | yes | What is held: {ticker: weight or amount}. Weights need not sum to one; amounts in the base currency are also accepted (then the crises are shown in money). 1 to 100 holdings. Tickers as the exchange l |
| base | no | Currency every figure is expressed in (USD, EUR, GBP, CAD…). Default USD. |
Two to eight separate portfolios measured over one shared window of price history: growth, volatility, worst fall, and how each moved against the others. Use it for separate portfolios; for a before-and-after of one portfolio, test_a_change. Give each portfolio a short label so the answer can refer to it; base sets the one currency all are measured in (default USD).
| Parameter | Type | Required | Notes |
|---|---|---|---|
| portfolios | object | yes | Two to eight portfolios, {label: {ticker: weight}}. Labels are shortened to letters and digits. |
| base | no | Currency every figure is expressed in (USD, EUR, GBP, CAD…). Default USD. |
Any change to one portfolio, measured before it is made: the current and the proposed holdings side by side on the same price history (structure, risk, worst falls, and what the change adds or removes). For a single new holding, check_before_you_buy says more; for one holding at every weight, sweep_holding. current and proposed are the two sets of holdings; start an
| Parameter | Type | Required | Notes |
|---|---|---|---|
| current | object | yes | What is held now, {ticker: weight}. |
| proposed | object | yes | What would be held after the change, {ticker: weight}. |
| base | no | Currency every figure is expressed in (USD, EUR, GBP, CAD…). Default USD. | |
| start | no | Optional window start, YYYY-MM-DD. | |
| end | no | Optional window end, YYYY-MM-DD. |
Finds the ticker when the reader gives a name, part of a ticker or an ISIN (for example 'Vanguard total world' gives VT), with the exchange each listing trades on. Use it first when a ticker is uncertain; for a list of tickers already written down, validate_symbols. base, when given, puts the listings in that currency first. Listings nobody here has checked are mark
| Parameter | Type | Required | Notes |
|---|---|---|---|
| query | string | yes | A fund or company name, a ticker, or an ISIN. |
| base | no | Currency every figure is expressed in (USD, EUR, GBP, CAD…). Default USD. |
Checks a list of tickers before a measurement: which have usable price history, which do not, and the closest listing where a symbol is ambiguous. Use it when the tickers are already written down; when only a name is known, search_symbols. base puts the listing in that currency first where a symbol trades in several (default USD). It measures nothing.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| tickers | array | yes | Tickers to check, up to 150. |
| base | no | Currency every figure is expressed in (USD, EUR, GBP, CAD…). Default USD. |
How many independent bets a portfolio's holdings add up to, from how their prices moved together rather than how many tickers there are, and each holding's share of the risk beside its share of the money, over the full record and over recent years. Use it for 'am I diversified?' or 'which holding carries the risk?'; measure_portfolio includes this with look-through
| Parameter | Type | Required | Notes |
|---|---|---|---|
| holdings | object | yes | What is held: {ticker: weight or amount}. Weights need not sum to one; amounts in the base currency are also accepted (then the crises are shown in money). 1 to 100 holdings. Tickers as the exchange l |
| base | no | Currency every figure is expressed in (USD, EUR, GBP, CAD…). Default USD. |
The companies a portfolio owns through its funds, added up across funds: the largest names with their share of the whole portfolio, names reached through more than one fund, and sectors. Use it for 'what do I really own?'; for the full measurement use measure_portfolio, for one fund alone asset_info. Give holdings as money amounts to get each company in money; base
| Parameter | Type | Required | Notes |
|---|---|---|---|
| holdings | object | yes | What is held: {ticker: weight or amount}. Weights need not sum to one; amounts in the base currency are also accepted (then the crises are shown in money). 1 to 100 holdings. Tickers as the exchange l |
| base | no | Currency every figure is expressed in (USD, EUR, GBP, CAD…). Default USD. |
Only past crises for one portfolio: 2008, 2020, 2022 and others inside its price history, with the fall, the worst day and the days it took to come back. Use it for 'what did crashes do to this?'; for the whole record use return_history. Give amounts to get each fall in money, in the base currency (default USD). Crises before a holding existed are named as not teste
| Parameter | Type | Required | Notes |
|---|---|---|---|
| holdings | object | yes | What is held: {ticker: weight or amount}. Weights need not sum to one; amounts in the base currency are also accepted (then the crises are shown in money). 1 to 100 holdings. Tickers as the exchange l |
| base | no | Currency every figure is expressed in (USD, EUR, GBP, CAD…). Default USD. |
The written report on one portfolio, with every figure numbered F1, F2... beside the method and the window behind it. For a reader who wants something to quote or keep; measure_portfolio returns this same report together with structure, look-through and crises. Amounts make the report speak in money, in the base currency (default USD). The window starts when
| Parameter | Type | Required | Notes |
|---|---|---|---|
| holdings | object | yes | What is held: {ticker: weight or amount}. Weights need not sum to one; amounts in the base currency are also accepted (then the crises are shown in money). 1 to 100 holdings. Tickers as the exchange l |
| base | no | Currency every figure is expressed in (USD, EUR, GBP, CAD…). Default USD. |
How one portfolio's daily moves line up with four common patterns (the market, small versus large companies, value versus growth, momentum): each sensitivity, whether it is distinguishable from zero, and how much of the movement the four explain together. Use it for 'what style am I really exposed to?'; for how many independent bets there are, portfolio_structure. H
| Parameter | Type | Required | Notes |
|---|---|---|---|
| holdings | object | yes | What is held: {ticker: weight or amount}. Weights need not sum to one; amounts in the base currency are also accepted (then the crises are shown in money). 1 to 100 holdings. Tickers as the exchange l |
| base | no | Currency every figure is expressed in (USD, EUR, GBP, CAD…). Default USD. |
For a portfolio held in one currency but priced partly in others: how much of it is outside the base currency, and what exchange-rate moves added to its growth, volatility and worst fall compared with the same holdings currency-hedged. Use it only when some holdings are priced in another currency than the holder's; for a portfolio entirely in one currency it has not
| Parameter | Type | Required | Notes |
|---|---|---|---|
| holdings | object | yes | What is held: {ticker: weight or amount}. Weights need not sum to one; amounts in the base currency are also accepted (then the crises are shown in money). 1 to 100 holdings. Tickers as the exchange l |
| base | no | Currency every figure is expressed in (USD, EUR, GBP, CAD…). Default USD. |
One portfolio read along three separate questions: what its risk is built from (concentration), how it behaved when markets broke (resilience), and what it returned for the risk taken (efficiency), each with its own figures. Use it when the reader asks whether something is off in how the portfolio is built; for the full measurement use measure_portfolio. Holdings as
| Parameter | Type | Required | Notes |
|---|---|---|---|
| holdings | object | yes | What is held: {ticker: weight or amount}. Weights need not sum to one; amounts in the base currency are also accepted (then the crises are shown in money). 1 to 100 holdings. Tickers as the exchange l |
| base | no | Currency every figure is expressed in (USD, EUR, GBP, CAD…). Default USD. |
One holding already in the portfolio, measured at every weight from none to all, with the rest of the money shared out in proportion: volatility, the holding's share of the risk and the number of independent bets at each point. Use it for 'how much of this is enough to change anything?'; for one specific change use test_a_change, for a holding not yet owned check_be
| Parameter | Type | Required | Notes |
|---|---|---|---|
| holdings | object | yes | What is held: {ticker: weight or amount}. Weights need not sum to one; amounts in the base currency are also accepted (then the crises are shown in money). 1 to 100 holdings. Tickers as the exchange l |
| ticker | string | yes | The holding to sweep; must be one of holdings. |
| base | no | Currency every figure is expressed in (USD, EUR, GBP, CAD…). Default USD. |
Starts from a loss the reader names and finds the least extreme combination of market moves that would produce it on this portfolio, beside the worst each of those moves actually did in the record. Use it for 'what would it take to lose that much?'; for what past crises actually did use past_crises. loss is a fraction (0.25 is a quarter); base sets the currency (def
| Parameter | Type | Required | Notes |
|---|---|---|---|
| holdings | object | yes | What is held: {ticker: weight or amount}. Weights need not sum to one; amounts in the base currency are also accepted (then the crises are shown in money). 1 to 100 holdings. Tickers as the exchange l |
| loss | number | no | The loss to explain, as a fraction: 0.25 = lose a quarter. |
| base | no | Currency every figure is expressed in (USD, EUR, GBP, CAD…). Default USD. |
What one portfolio returned over its record: growth per year, before and after inflation, best and worst months and years, the range of any 12 months in a row, returns by month and year, and how far the weights drift between rebalances. Use it for 'how did this do?'; for crises only use past_crises, for money put in every month monthly_plan. Base sets the currency t
| Parameter | Type | Required | Notes |
|---|---|---|---|
| holdings | object | yes | What is held: {ticker: weight or amount}. Weights need not sum to one; amounts in the base currency are also accepted (then the crises are shown in money). 1 to 100 holdings. Tickers as the exchange l |
| base | no | Currency every figure is expressed in (USD, EUR, GBP, CAD…). Default USD. |
Three or four plain-language sentences about one portfolio (what its risk is built from and its worst historical fall), each with the window it rests on. Use it for the shortest answer, or for a reader new to investing; every figure is in measure_portfolio. Amounts make the fall come out in money, in the base currency (default USD). No tables and no numbered report.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| holdings | object | yes | What is held: {ticker: weight or amount}. Weights need not sum to one; amounts in the base currency are also accepted (then the crises are shown in money). 1 to 100 holdings. Tickers as the exchange l |
| base | no | Currency every figure is expressed in (USD, EUR, GBP, CAD…). Default USD. |
The latest daily close for each ticker, in the base currency and in its own, with the date. Use it to turn a number of shares into an amount before a measurement; for the history and figures of one asset use asset_info. base sets the currency of the converted price (default USD). One figure per ticker; no price history is returned.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| tickers | array | yes | Tickers, up to 50. |
| base | no | Currency every figure is expressed in (USD, EUR, GBP, CAD…). Default USD. |
One fund or share on its own, without a portfolio: name, type, exchange, yearly cost when the issuer publishes it, measured return, volatility and worst fall, and for a fund its largest holdings and sectors. Use it before deciding whether a ticker belongs in a measurement; for only today's price use last_price, for what a whole portfolio owns through its funds use l
| Parameter | Type | Required | Notes |
|---|---|---|---|
| ticker | string | yes | One ticker, as the exchange lists it. |
Replays the same amount bought on the first trading day of every month, on one portfolio's own daily history with dividends reinvested: what it became against what was put in, the day it stood furthest below the money put in so far, and the longest stretch below it; then the same plan from every January the record allows, because the start year is luck. Use it for '
| Parameter | Type | Required | Notes |
|---|---|---|---|
| holdings | object | yes | What is held: {ticker: weight or amount}. Weights need not sum to one; amounts in the base currency are also accepted (then the crises are shown in money). 1 to 100 holdings. Tickers as the exchange l |
| monthly | number | yes | Amount bought every month, in the base currency. |
| start | no | The year whose January the plan starts in; the record's first whole January when absent. | |
| base | no | Currency every figure is expressed in (USD, EUR, GBP, CAD…). Default USD. |
Whether re-optimising an allocation would have helped: fit on the years before each date, hold on prices it had not seen, repeat, and compare that record with the portfolio actually held and with equal weights. Use it only when the reader asks whether an optimiser would have beaten what they hold; it is not for choosing weights. tickers are the candidates (2 to 30);
| Parameter | Type | Required | Notes |
|---|---|---|---|
| tickers | array | yes | The candidate holdings, 2 to 30. |
| holdings | no | Optional: the portfolio actually held, {ticker: weight}, measured on the same span for comparison. | |
| objective | string | no | What each refit maximises or minimises: max_sharpe, min_variance, min_drawdown, min_cvar or max_quadratic_utility. |
| train_years | number | no | Years of history each refit sees. |
| step_months | integer | no | Months each fitted mix is held. |
| base | no | Currency every figure is expressed in (USD, EUR, GBP, CAD…). Default USD. |
Before adding one new holding to an existing portfolio: how much of it is already owned through the current funds (from the fund's SEC filing when there is one), whether it adds an independent bet, and what past crises would have done with it included. Use it for one addition; for removing, reweighting or several changes at once, test_a_change. add is the ticker con
| Parameter | Type | Required | Notes |
|---|---|---|---|
| holdings | object | yes | What is held: {ticker: weight or amount}. Weights need not sum to one; amounts in the base currency are also accepted (then the crises are shown in money). 1 to 100 holdings. Tickers as the exchange l |
| add | string | yes | The one ticker being considered. |
| amount | number | yes | How much of it, in the same units as holdings (money when holdings are amounts). |
| base | no | Currency every figure is expressed in (USD, EUR, GBP, CAD…). Default USD. |
Replays a yearly withdrawal, raised with real inflation, from every start month the portfolio's history allows: how many starts lasted the full span, how many ran out and when, the lowest point from the worst start, and the highest yearly rate that ran out from no start. Use it for 'can I live off this?'; for money put in every month instead, monthly_plan. amount is
| Parameter | Type | Required | Notes |
|---|---|---|---|
| holdings | object | yes | What is held: {ticker: weight or amount}. Weights need not sum to one; amounts in the base currency are also accepted (then the crises are shown in money). 1 to 100 holdings. Tickers as the exchange l |
| withdrawal | number | yes | Taken each year, in today's money; raised with the real price index of the base currency. |
| years | integer | no | How many years, 5 to 50. |
| amount | no | How much is in the portfolio, when holdings are weights rather than money. | |
| base | no | Currency every figure is expressed in (USD, EUR, GBP, CAD…). Default USD. |
- Every tool — any call limit is its publisher’s, not ours
- No card, and mcprush charges nothing for it
- Runs at its publisher’s own address — this marketplace is not in the path
- Nothing to cap, because mcprush bills nothing
What counts against your monthly calls
| Tool | Unit | Calls used | Out of the allowance |
|---|
Nothing here is billable: mcprush charges nothing to install Folionomiq or to call it, at any volume.
Two independent axes, because powerful and malicious are different questions. The grade is threat only. The capability level is blast radius, and it is never a penalty on the grade — it is priced as one subtract-only term in the score, where you can see it.
This listing is an address its publisher runs, and you connect to it directly — this marketplace is not in the path. The scanner reads packages and public source, and an address is neither. So there is no grade — not a withheld one, an unmeasured one.
Release history
This is an address its publisher runs: which release it serves is theirs to choose, so there is nothing here to pin. The history below is for reading; the current release on file is 1.5.0.
No release note was published with this version.
One review per account, from a signed-in account that does not publish this listing. Nothing else is asked — you can say what you think before you install it. Publishers can reply once per review, and a review can be edited or deleted by whoever wrote it.
Any signed-in account that does not publish Folionomiq can review it, once — before installing it or after. A review from an account that has installed it is marked as one.
Nobody has reviewed this listing. The rating on the card is the mean of the reviews written here and nothing else, so there is no rating until somebody writes the first — which takes a signed-in account that does not publish it, and nothing else.