Comprehensive Model Context Protocol server for managing Home Assistant through AI assistants.
Nothing to run from here
Remodeleriq is installed from its publisher's own source and answers where it runs, so this marketplace is not in the path of a single call. There is no address here to send one to, and a panel that pretended otherwise would be showing you an answer we made up. Install it and call it from your own client — the Installation tab has the entry for each one.
10
tools declared
—
trust score
remote
at its publisher
—
calls last 7d
What it does
Check if a contractor's remodeling bid is fair: analyze a quote, get cost + labor estimates.
Quickstart
# 1 — add it to Claude Code
claude mcp add --scope user --transport http remodeleriq-mcp https://remodeleriq.com/mcp
# 2 — ask your agent for something these tools do
# remodeleriq_analyze_bid, remodeleriq_get_cost_estimate, remodeleriq_get_labor_rates and 7 more
Remodeleriq costs nothing on mcprush: there is no plan to choose here, no cap to set and nothing mcprush can bill you for.
Publishernot claimed
GUAll 2 servers
gustavoatar2 servers
1 category
Collected from a public index. Nobody has claimed this account, so nothing here was written by its author — claim it if it is yours.
Installation
Where are you running it?
Every route below installs the same thing and ends at the same approval screen. Nothing here runs on your machine and nothing runs on ours: this server answers at its publisher’s own address, and what you install is the connection straight to it.
Claude Codedeclared by this listing
This is a public server: it answers at its publisher’s own address and this marketplace is not in the path. Claude Code registers it in one command; --scope user makes it available in every project. The transport below is http, as the publisher's own manifest declares it.
claude mcp add --scope user --transport http remodeleriq-mcp https://remodeleriq.com/mcpReconnect, or start a new session, and the tools appear in the model’s tool list.
Free on mcprush, and it answers at its publisher’s own address: this marketplace is not in the path, so there is no key of ours to hold and no card to add.
What it writes
One config entry pointing straight at the publisher’s own address — this marketplace is not in the path, and nothing from this listing executes on your machine.
What you approve
10 tools, with what each one reads, writes and reaches shown before you agree — the same list on every route above. Read the tool surface.
Tool surface
What the model actually sees. Descriptions are diffed on every release — see version history.
Analyze a home-remodeling contractor's bid/estimate for fairness and risk. Returns a 0-100 confidence score, score_breakdown by dimension, red flags with stable flag IDs (deposit traps, vague scope, missing items, payment terms), a plain-English summary, and negotiation talk tracks. Score rubric: contract clarity 40%, scope completeness 30%, price realism 30%. Use when a homeowner asks 'is this co
| Parameter | Type | Required | Notes |
|---|---|---|---|
| bid_text | string | yes | The full text of the contractor's bid/estimate (line items, terms, scope). |
| bid_total | number | no | The total dollar amount of the bid, if known. |
| state_code | string | no | Two-letter US state code (e.g. 'TX', 'GA') for localized labor/legal context. Defaults to GA. |
| square_footage | number | no | Project area in square feet, if known (e.g. 200 for a bathroom, 400 for a kitchen). |
| finish_tier | string | no | Quality tier of finishes specified in the bid. |
| scope_depth | string | no | Depth of work: cosmetic (paint/fixtures only), pull_and_replace (replace but not reconfigure), full_gut (down to studs), addition (new square footage). |
Get a 2026 market cost range for a home-remodeling project in a US state/city, backed by Zonda Cost vs. Value benchmarks with regional adjustment. Use when a homeowner asks 'how much does a [kitchen/bathroom/roof/etc.] remodel cost in [place]?'
| Parameter | Type | Required | Notes |
|---|---|---|---|
| project_type | string | yes | Project type, e.g. 'kitchen-remodel', 'bathroom-remodel', 'roofing', 'siding', 'deck', 'addition', 'basement'. |
| state_code | string | yes | Two-letter US state code (e.g. 'CA', 'TX'). |
| city_key | string | no | Optional city slug (e.g. 'atlanta-ga') for city-level precision. |
Get 2026 burdened construction trade labor rates ($/hour) for a US state, derived from BLS wage data. Returns rates by trade (carpenter, plumber, electrician, painter, etc.). Use when a homeowner asks what trade labor should cost or whether a bid's labor line is fair.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| state_code | string | yes | Two-letter US state code (e.g. 'TX', 'NY'). |
| trade | string | no | Optional specific trade to filter to (e.g. 'plumber', 'electrician', 'carpenter'). |
Deprecated: prefer remodeleriq_analyze_bid. Analyze a home-remodeling contractor's bid/estimate for fairness and risk. Returns a 0-100 confidence score, red flags, a plain-English summary, and negotiation talk tracks. Note: analyses may contribute de-identified data to aggregate remodeling-risk research.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| bid_text | string | yes | The full text of the contractor's bid/estimate (line items, terms, scope). |
| bid_total | number | no | The total dollar amount of the bid, if known. |
| state_code | string | no | Two-letter US state code (e.g. 'TX', 'GA') for localized labor/legal context. Defaults to GA. |
| square_footage | number | no | Project area in square feet, if known (e.g. 200 for a bathroom, 400 for a kitchen). |
| finish_tier | string | no | Quality tier of finishes specified in the bid. |
| scope_depth | string | no | Depth of work: cosmetic (paint/fixtures only), pull_and_replace (replace but not reconfigure), full_gut (down to studs), addition (new square footage). |
Deprecated: prefer remodeleriq_get_cost_estimate. Get a 2026 market cost range for a home-remodeling project in a US state/city, backed by Zonda Cost vs. Value benchmarks with regional adjustment.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| project_type | string | yes | Project type, e.g. 'kitchen-remodel', 'bathroom-remodel', 'roofing', 'siding', 'deck', 'addition', 'basement'. |
| state_code | string | yes | Two-letter US state code (e.g. 'CA', 'TX'). |
| city_key | string | no | Optional city slug (e.g. 'atlanta-ga') for city-level precision. |
Deprecated: prefer remodeleriq_get_labor_rates. Get 2026 burdened construction trade labor rates ($/hour) for a US state, derived from BLS wage data.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| state_code | string | yes | Two-letter US state code (e.g. 'TX', 'NY'). |
| trade | string | no | Optional specific trade to filter to (e.g. 'plumber', 'electrician', 'carpenter'). |
Compare 2–5 contractor bids for the same project side-by-side. Returns: per-bid confidence scores; a per-trade cost comparison table sorted by price variance; a scope-gap matrix (what Bid A includes that Bid B omits); apples-to-apples adjusted totals (normalizing for scope gaps); outlier detection (trades priced ≥2× or ≤0.5× the median); consolidated red flags across all bids; and a winner recomme
| Parameter | Type | Required | Notes |
|---|---|---|---|
| bids | array | yes | 2–5 contractor bids to compare side-by-side. |
Deprecated: prefer remodeleriq_compare_bids. Compare 2–5 contractor bids side-by-side with per-trade cost comparison, scope-gap matrix, and winner recommendation.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| bids | array | yes | 2–5 contractor bids to compare side-by-side. |
Get aggregate red-flag statistics from the RemodelerIQ bid corpus — real anonymized data from bids analyzed by the platform. Returns the most common risk flags and their fire rates, average confidence scores, and bid-total distributions, filtered optionally by US state, project type, or bid size. Requires corpus ≥ 500 submissions; cells below 30 submissions are suppressed. Use when a homeowner ask
| Parameter | Type | Required | Notes |
|---|---|---|---|
| state_code | string | no | Two-letter US state code to filter stats (e.g. 'GA', 'TX'). Omit for national data. |
| project_type | string | no | Project type to filter (e.g. 'kitchen-remodel', 'bathroom-remodel', 'roofing'). Omit for all project types. |
| bid_size_bucket | string | no | Bid total range to filter. Omit for all sizes. |
Deprecated: prefer remodeleriq_get_risk_stats. Get aggregate red-flag statistics from the RemodelerIQ bid corpus.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| state_code | string | no | Two-letter US state code to filter stats (e.g. 'GA', 'TX'). Omit for national data. |
| project_type | string | no | Project type to filter (e.g. 'kitchen-remodel', 'bathroom-remodel', 'roofing'). Omit for all project types. |
| bid_size_bucket | string | no | Bid total range to filter. Omit for all sizes. |
Free
$0 forever
- Every tool — any call limit is its publisher’s, not ours
- No card, and mcprush charges nothing for it
- Runs at its publisher’s own address — this marketplace is not in the path
- Nothing to cap, because mcprush bills nothing
What counts against your monthly calls
| Tool | Unit | Calls used | Out of the allowance |
|---|
Nothing here is billable: mcprush charges nothing to install Remodeleriq or to call it, at any volume.
Call allowance · this installenforced at the gateway
Monthly allowance, in calls
—
—
Alert at 80% · then the tool returns a normal MCP error
Used this month: —
—Grade not published
No rule-by-rule report on file for this release
Two independent axes, because powerful and malicious are different questions. The grade is threat only. The capability level is blast radius, and it is never a penalty on the grade — it is priced as one subtract-only term in the score, where you can see it.
This listing is an address its publisher runs, and you connect to it directly — this marketplace is not in the path. The scanner reads packages and public source, and an address is neither: the repository linked on this page is where this record was collected from, not a copy of what the address serves, so it is not graded in its place. So there is no grade — not a withheld one, an unmeasured one.
Release history
This is an address its publisher runs: which release it serves is theirs to choose, so there is nothing here to pin. The history below is for reading; the current release on file is 1.0.0.
1.0.0
undated
latestNo release note was published with this version.
—
no reviews yet
Who can review
One review per account, from a signed-in account that does not publish this listing. Nothing else is asked — you can say what you think before you install it. Publishers can reply once per review, and a review can be edited or deleted by whoever wrote it.
Sign in to write one
Any signed-in account that does not publish Remodeleriq can review it, once — before installing it or after. A review from an account that has installed it is marked as one.
No reviews yet
Nobody has reviewed this listing. The rating on the card is the mean of the reviews written here and nothing else, so there is no rating until somebody writes the first — which takes a signed-in account that does not publish it, and nothing else.