Comprehensive Model Context Protocol server for managing Home Assistant through AI assistants.
Nothing to run from here
Philadelphia Restoration is installed from its publisher's own source and answers where it runs, so this marketplace is not in the path of a single call. There is no address here to send one to, and a panel that pretended otherwise would be showing you an answer we made up. Install it and call it from your own client — the Installation tab has the entry for each one.
7
tools declared
—
trust score
remote
at its publisher
—
calls last 7d
What it does
Philadelphia water and fire damage restoration: assessment, insurance, costs, and knowledge search.
Quickstart
# 1 — add it to Claude Code
claude mcp add --scope user --transport http philadelphia-restoration-mcp https://mcp.philadelphiarestoration.org/mcp
# 2 — ask your agent for something these tools do
# assess_damage, check_insurance_coverage, estimate_cost and 4 more
Philadelphia Restoration costs nothing on mcprush: there is no plan to choose here, no cap to set and nothing mcprush can bill you for.
Publishernot claimed
LUAll 1 server
lucasnoah1 server
1 category
Collected from a public index. Nobody has claimed this account, so nothing here was written by its author — claim it if it is yours.
Installation
Where are you running it?
Every route below installs the same thing and ends at the same approval screen. Nothing here runs on your machine and nothing runs on ours: this server answers at its publisher’s own address, and what you install is the connection straight to it.
Claude Codedeclared by this listing
This is a public server: it answers at its publisher’s own address and this marketplace is not in the path. Claude Code registers it in one command; --scope user makes it available in every project. The transport below is http, as the publisher's own manifest declares it.
claude mcp add --scope user --transport http philadelphia-restoration-mcp https://mcp.philadelphiarestoration.org/mcpReconnect, or start a new session, and the tools appear in the model’s tool list.
Free on mcprush, and it answers at its publisher’s own address: this marketplace is not in the path, so there is no key of ours to hold and no card to add.
What it writes
One config entry pointing straight at the publisher’s own address — this marketplace is not in the path, and nothing from this listing executes on your machine.
What you approve
7 tools, with what each one reads, writes and reaches shown before you agree — the same list on every route above. Read the tool surface.
Tool surface
What the model actually sees. Descriptions are diffed on every release — see version history.
Returns structured damage assessment for water and fire damage in Philadelphia residential properties. Classifies 13 damage types by severity, provides prioritized immediate safety actions, estimates restoration costs with Philadelphia market rates, and includes neighborhood-specific risk context. Based on IICRC S500/S520/S700 standards and field experience from Philadelphia restoration companies.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| damage_type | string | yes | Type of water or fire damage to assess |
| neighborhood | string | no | Philadelphia neighborhood (e.g., 'fishtown', 'center-city') |
Returns Pennsylvania insurance coverage analysis for water and fire damage claims. Evaluates coverage likelihood by HO policy type (HO-1 through HO-6), applies PA-specific regulations including bad faith statute (42 Pa.C.S. § 8371) and Act 119, and provides step-by-step claims process guidance with common denial reasons and appeals strategies.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| cause | string | no | Specific cause of damage (e.g., 'frozen pipes', 'grease fire') |
| damage_type | string | yes | Type of water or fire damage |
| policy_type | string | no | Homeowner's insurance policy type (default: HO-3) |
Returns Philadelphia-area restoration cost estimates broken down by service type. Includes per-unit pricing (per sq ft, per hour), labor rates ($64-$183/hr), factors that increase or decrease total cost (pre-1978 homes, rowhouse access, code upgrades), and insurance deductible guidance. Based on current Philadelphia metro market data.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| damage_type | string | yes | Type of damage for cost estimation |
| severity | string | yes | Assessed severity level |
Returns prioritized, time-critical emergency action steps for active water or fire damage in Philadelphia. Includes safety warnings, step-by-step instructions with time sensitivity flags, Philadelphia emergency contacts (PWD, PECO, PGW, Philadelphia Fire Department), and documentation checklist for insurance claims. Use this tool FIRST when a homeowner has an active emergency.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| damage_type | string | yes | Type of active emergency damage |
Returns Philadelphia-specific local information for damage restoration. Covers 6+ neighborhoods with housing stock analysis (rowhouses, twins, pre-war construction), common damage patterns, flood risk levels, emergency utility contacts, building code requirements, and seasonal risk factors. Helps agents provide neighborhood-aware guidance to Philadelphia homeowners.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| info_type | string | no | Type of info: neighborhood-specific or city-wide (default: city) |
| neighborhood | string | no | Philadelphia neighborhood slug (e.g., 'fishtown', 'south-philly') |
Submits a callback request for a Philadelphia homeowner dealing with water or fire damage. A restoration concierge calls back within 15 minutes during business hours (Mon-Fri 8am-6pm ET) to assess the situation and connect with vetted local professionals. Requires phone number and situation description. Returns a reference number for tracking.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| name | string | no | Homeowner's name (optional) |
| phone | string | yes | Phone number for callback (US format) |
| situation | string | no | Brief description of the damage situation |
Semantic search across 60+ expert documents covering water and fire damage restoration. Topics include drying science, moisture mapping, equipment protocols, mold prevention (IICRC S520), fire restoration (IICRC S700), insurance adjuster tactics, contractor evaluation, and Philadelphia housing patterns. Returns relevant excerpts with source citations and relevance scores. Grounded in IICRC standar
| Parameter | Type | Required | Notes |
|---|---|---|---|
| query | string | yes | Natural language search query (max 1000 characters) |
Free
$0 forever
- Every tool — any call limit is its publisher’s, not ours
- No card, and mcprush charges nothing for it
- Runs at its publisher’s own address — this marketplace is not in the path
- Nothing to cap, because mcprush bills nothing
What counts against your monthly calls
| Tool | Unit | Calls used | Out of the allowance |
|---|
Nothing here is billable: mcprush charges nothing to install Philadelphia Restoration or to call it, at any volume.
Call allowance · this installenforced at the gateway
Monthly allowance, in calls
—
—
Alert at 80% · then the tool returns a normal MCP error
Used this month: —
—Grade not published
No rule-by-rule report on file for this release
Two independent axes, because powerful and malicious are different questions. The grade is threat only. The capability level is blast radius, and it is never a penalty on the grade — it is priced as one subtract-only term in the score, where you can see it.
This listing is an address its publisher runs, and you connect to it directly — this marketplace is not in the path. The scanner reads packages and public source, and an address is neither. So there is no grade — not a withheld one, an unmeasured one.
Release history
This is an address its publisher runs: which release it serves is theirs to choose, so there is nothing here to pin. The history below is for reading; the current release on file is 1.0.0.
1.0.0
undated
latestNo release note was published with this version.
—
no reviews yet
Who can review
One review per account, from a signed-in account that does not publish this listing. Nothing else is asked — you can say what you think before you install it. Publishers can reply once per review, and a review can be edited or deleted by whoever wrote it.
Sign in to write one
Any signed-in account that does not publish Philadelphia Restoration can review it, once — before installing it or after. A review from an account that has installed it is marked as one.
No reviews yet
Nobody has reviewed this listing. The rating on the card is the mean of the reviews written here and nothing else, so there is no rating until somebody writes the first — which takes a signed-in account that does not publish it, and nothing else.