Comprehensive Model Context Protocol server for managing Home Assistant through AI assistants.
Nothing to run from here
Hive heating is installed from its publisher's own source and answers where it runs, so this marketplace is not in the path of a single call. There is no address here to send one to, and a panel that pretended otherwise would be showing you an answer we made up. Install it and call it from your own client — the Installation tab has the entry for each one.
12
tools declared
—
trust score
local
runs on your machine
—
calls last 7d
What it does
Check and control Hive smart heating: thermostats, radiator valves, hot water and holiday mode
Quickstart
Install it the way its author documents:
1. docker run -i --rm -v ghcr.io/mattoddie/hive-mcp:0.3.1
2. Docker volume for the login (tokens and the remembered device), so it survives restarts. Use the same volume for `hive-mcp login`.
The full guide: https://github.com/mattoddie/hive-mcp
Publishernot claimed
MAAll 6 servers
mattoddie6 servers
3 categories
Collected from a public index. Nobody has claimed this account, so nothing here was written by its author — claim it if it is yours.
Installation
Where are you running it?
Every route below installs the same thing and ends at the same approval screen. This one runs on your machine: your client starts Hive heating as a process under your own user, with your files and your network, so the tool surface below is what it can do to your computer rather than to a server somewhere else. It has not been scanned here, so read the surface, and its source, before you approve it.
Install it the way its author documents:
1. docker run -i --rm -v ghcr.io/mattoddie/hive-mcp:0.3.1
2. Docker volume for the login (tokens and the remembered device), so it survives restarts. Use the same volume for `hive-mcp login`.
The full guide: https://github.com/mattoddie/hive-mcp
Tool surface
What the model actually sees. Descriptions are diffed on every release — see version history.
Read from its source code. A server that builds its tool list when it starts can list more tools than this.
Finish a login started with hive_auth_start by giving the code Hive texted to the account's phone. This also registers the server as a remembered device, so it won't need a code again.
No parameter schema on file.
Start logging this server in to Hive with HIVE_USERNAME and HIVE_PASSWORD. If this server is already a remembered device, that's the whole login. Otherwise Hive texts a code to the account's phone: ask the user for it and pass it to hive_auth_complete within about three minutes. Only use this when…
No parameter schema on file.
Show whether this server is logged in to Hive: the account (with the email address masked), whether this server is a remembered device (so it can log in again without an SMS code), when the current token expires and any login error. Never shows passwords, tokens or device secrets.
No parameter schema on file.
Show the heating: for each heating zone (a Hive thermostat) and TRV zone (Hive radiator valves), the current temperature, target temperature, mode (schedule, manual, off or boost), boost time left, whether it's calling for heat, what the schedule asks for now and next, and thermostat or valve…
No parameter schema on file.
Show a zone's weekly heating schedule: for each day, the periods and the target temperature for each, in the home's local time. Also says what the schedule asks for now and when it next changes.
No parameter schema on file.
Show whether holiday mode is set: when it starts and ends and the temperature the heating holds while you're away.
No parameter schema on file.
Show the hot water: whether it's heating now, the mode (schedule, on, off or boost), boost time left, and what the schedule asks for now and next.
No parameter schema on file.
Show the weekly hot water schedule: for each day, when the hot water is on and off, in the home's local time.
No parameter schema on file.
A one-call snapshot of the home: every heating zone and TRV zone (current and target temperature, mode, boost, whether it's calling for heat), the hot water, plugs, lights and sensors, holiday mode, and anything that needs attention: low batteries, offline devices and discontinued hardware. A good…
No parameter schema on file.
List the Hive hardware: hub, thermostats, boiler module, radiator valves (TRVs), plugs, bulbs and sensors, with online status, battery level, signal strength, model and firmware. Filter by type, low battery or offline.
No parameter schema on file.
List Hive smart plugs (on or off, power use), lights (on or off, brightness, colour temperature) and sensors (window and door sensors open or closed, motion sensors), with online status and batteries.
No parameter schema on file.
List the Hive radiator valves (TRVs) by zone: each zone's temperature, target and mode, and each valve's battery, signal, online status, calibration, mounting and child lock.
No parameter schema on file.
Free
$0 forever
- Every tool, no call limit
- No card, and mcprush charges nothing for it
- Source published under MIT
- Runs on your machine — nothing of it reaches our gateway
- Nothing to cap, because mcprush bills nothing
What counts against your monthly calls
| Tool | Unit | Calls used | Out of the allowance |
|---|
Nothing here is billable: mcprush charges nothing to install Hive heating or to call it, at any volume.
Call allowance · this installenforced at the gateway
Monthly allowance, in calls
—
—
Alert at 80% · then the tool returns a normal MCP error
Used this month: —
—Grade not published
No rule-by-rule report on file for this release
Two independent axes, because powerful and malicious are different questions. The grade is threat only. The capability level is blast radius, and it is never a penalty on the grade — it is priced as one subtract-only term in the score, where you can see it.
This listing ships as a container image. The scanner reads packages on npm and PyPI and public source; an image is neither, so there is no grade here — not a withheld one, an unmeasured one.
Release history
It installs from a container image rather than from a versioned package, so the command cannot be pinned to a release. The history below is for reading; the current release on file is 0.3.1.
0.3.1
undated
latestNo release note was published with this version.
—
no reviews yet
Who can review
One review per account, from a signed-in account that does not publish this listing. Nothing else is asked — you can say what you think before you install it. Publishers can reply once per review, and a review can be edited or deleted by whoever wrote it.
Sign in to write one
Any signed-in account that does not publish Hive heating can review it, once — before installing it or after. A review from an account that has installed it is marked as one.
No reviews yet
Nobody has reviewed this listing. The rating on the card is the mean of the reviews written here and nothing else, so there is no rating until somebody writes the first — which takes a signed-in account that does not publish it, and nothing else.