Comprehensive Model Context Protocol server for managing Home Assistant through AI assistants.
Nothing to run from here
MechanoFab is installed from its publisher's own source and answers where it runs, so this marketplace is not in the path of a single call. There is no address here to send one to, and a panel that pretended otherwise would be showing you an answer we made up. Install it and call it from your own client — the Installation tab has the entry for each one.
20
tools declared
—
trust score
remote
at its publisher
—
calls last 7d
What it does
Manufacturing capability graph for AI agents: materials, processes, tolerances, and instant quotes.
Quickstart
# 1 — add it to Claude Code
claude mcp add --scope user --transport http mechanofab-mcp https://mcp.mechanofab.com/mcp
# 2 — ask your agent for something these tools do
# calculate_part_mass, check_equipment_capability, check_material_environment_compatibility and 17 more
MechanoFab costs nothing on mcprush: there is no plan to choose here, no cap to set and nothing mcprush can bill you for.
Publishernot claimed
MEAll 1 server
mechanofab1 server
1 category
Collected from a public index. Nobody has claimed this account, so nothing here was written by its author — claim it if it is yours.
Installation
Where are you running it?
Every route below installs the same thing and ends at the same approval screen. Nothing here runs on your machine and nothing runs on ours: this server answers at its publisher’s own address, and what you install is the connection straight to it.
Claude Codedeclared by this listing
This is a public server: it answers at its publisher’s own address and this marketplace is not in the path. Claude Code registers it in one command; --scope user makes it available in every project. The transport below is http, as the publisher's own manifest declares it.
claude mcp add --scope user --transport http mechanofab-mcp https://mcp.mechanofab.com/mcpReconnect, or start a new session, and the tools appear in the model’s tool list.
Free on mcprush, and it answers at its publisher’s own address: this marketplace is not in the path, so there is no key of ours to hold and no card to add.
What it writes
One config entry pointing straight at the publisher’s own address — this marketplace is not in the path, and nothing from this listing executes on your machine.
What you approve
20 tools, with what each one reads, writes and reaches shown before you agree — the same list on every route above. Read the tool surface.
Tool surface
What the model actually sees. Descriptions are diffed on every release — see version history.
Use when the user provides a part volume and material to calculate mass or weight. Returns mass in grams and kilograms. Example: 'How heavy is a 100cm³ aluminum 6061 part?'
| Parameter | Type | Required | Notes |
|---|---|---|---|
| material_id | string | yes | Material_ID from the materials dictionary |
| volume_cm3 | number | yes | Part volume in cubic centimeters |
Use when the user asks 'can the Bambu X1C print a 400mm × 400mm × 400mm part?', 'does this machine support 25 micron layer thickness?', 'is this machine capable for this part?'. Returns capable/not-capable with specific gaps.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| model_id | string | yes | — |
| required | object | no | — |
Use when the user describes an operating environment (temperature, humidity, UV, chemicals) and wants to know if a material is suitable. Returns a compatibility rating (excellent/good/fair/poor) and specific risk factors.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| material_id | string | yes | — |
| environment | object | yes | — |
Use when the user specifies an operating temperature and asks if a material is suitable (e.g. 'can ABS handle 80°C?', 'what is the max temp for 6061 aluminum?'). Returns within_range status, min/max service temps, and safety margin.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| material_id | string | yes | — |
| service_temp_c | number | yes | Desired operating temperature in °C |
Use when the user wants to compare specific machines (e.g. 'compare Formlabs Form 3 vs Stratasys J55', 'which machine has better build volume?'). Accepts 2–4 model IDs and optional metric list.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| model_ids | array | yes | — |
| compare_on | array | no | — |
Use when the user asks to compare materials (e.g. 'AL6061 vs SS304', 'which plastic is stronger'). Returns a structured comparison table grouped by property. Accepts 2–5 material IDs and an optional list of properties to compare.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| material_ids | array | yes | List of Material_IDs to compare |
| properties | array | no | Optional: which properties to include. Defaults to density, tensile, yield, max_temp, cost_tier. |
Use when the user wants to compare manufacturing processes (e.g. 'SLS vs FDM vs SLA comparison', 'which process has better tolerance: CNC or injection molding?'). Accepts 2–5 process IDs and optional metric list.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| process_ids | array | yes | — |
| compare_on | array | no | Optional: metrics to include. Omit for all metrics. |
Use when the user specifies material requirements (e.g. 'density < 3 g/cm³', 'tensile > 400 MPa', 'max temp ≥ 200°C'). Returns all materials that pass every constraint. Supports gte, lte, eq, contains operators.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| constraints | array | yes | — |
| process_id | string | no | Optional: only return materials compatible with this process |
Use when the user asks 'what can replace FDM for this part?', 'alternative to CNC for low volumes?', or needs to switch process due to lead time / cost / material constraints.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| process_id | string | yes | — |
| material_id | string | no | Optional: filter alternatives compatible with this material. |
| constraints | object | no | — |
Use when the user asks 'what machines can do SLS?', 'do you have equipment that can print 300mm × 300mm?', 'which printers support PEEK material?'. Returns matching equipment with build volumes, layer thickness, and availability status.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| process_id | string | yes | — |
| build_size_min_mm | object | no | — |
| layer_thickness_max_micron | number | no | — |
| material_id | string | no | Optional: filter by material compatibility. |
Use when the user wants alternatives to a specific material (e.g. 'what can replace SS304?', 'cheaper alternative to titanium'). Returns materials ranked by similarity score. Match criteria include strength, density, cost_tier, process_compat, thermal, corrosion.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| material_id | string | yes | — |
| match_criteria | array | yes | — |
| max_results | number | no | — |
Use when the user asks about machine certifications, dimensional accuracy, or QC procedures (e.g. 'is this machine ISO certified?', 'what is the dimensional accuracy of the EOS M 290?', 'what inspection methods do you use for this machine?').
| Parameter | Type | Required | Notes |
|---|---|---|---|
| model_id | string | yes | — |
Use when the user asks industry-specific requirements (e.g. 'what materials are used in aerospace?', 'what certifications does the medical device industry require?', 'typical tolerances for automotive parts?').
| Parameter | Type | Required | Notes |
|---|---|---|---|
| industry_id | string | yes | — |
Use when the user asks about ISO 2768 tolerances (e.g. 'what is ISO 2768-m tolerance for 50mm?', 'ISO 2768 fine grade flatness?', 'general tolerance for machined parts'). Returns the ±tolerance value, range string, and applicable dimension range.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| grade | string | yes | f=Fine, m=Medium, c=Coarse, v=Very Coarse |
| nominal_dimension_mm | number | yes | — |
| tolerance_type | string | yes | — |
Use when the user needs to know if a material meets regulatory requirements (e.g. 'is this plastic RoHS compliant?', 'does this aluminum meet FDA requirements?'). Returns compliance status for RoHS, REACH, FDA, ISO, ASTM, CE.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| material_id | string | yes | — |
| standards | array | no | Optional: check specific standards only. Omit to return all known compliance data. |
Use when the user asks which processes can be used with a material (e.g. 'can titanium be FDM printed?', 'what processes work with PEEK?'). Returns compatible and incompatible process lists.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| material_id | string | yes | — |
| process_ids | array | no | Optional: check specific processes only. Omit to return all. |
Use when the user asks about process specs, capabilities, or constraints (e.g. 'what is the tolerance of SLS?', 'what is the build volume of FDM?', 'what lead time for CNC machining?'). Returns category, build size, tolerance, compatible materials, lead time, and surface finish.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| process_id | string | yes | — |
Use when the user asks 'what materials are approved for medical devices?', 'best lightweight materials for aerospace?', 'food-safe materials for injection molding?'. Cross-references industries and materials dictionaries.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| industry_id | string | yes | — |
| process_id | string | no | Optional: filter by process compatibility. |
| requirements | array | no | — |
Use this tool to CALCULATE a 3D printing price. Provide material_name, color, lead_time (must match the 3dp-pricing dictionary), quantity, and either weight_g or volume_cm3 — or an uploaded file_key (obtained from /v1/uploads/presign + /v1/uploads/complete) which is parsed to get volume. This tool does NOT create an order; it returns part_price / total / order_url. Output is desensitized (no unit
| Parameter | Type | Required | Notes |
|---|---|---|---|
| parts | array | yes | One or more part lines. Each line is priced independently. |
| notes | string | no | Order-level notes (applies to all parts). |
Use to resolve a user's material description (industry grade name like 'PA12', a colloquial term like 'nylon', a Chinese term, or a vague description) into concrete materials.csv entries. Unlike compare_materials/find_equivalent_materials (which need an exact known ID), this tool accepts messy input and returns a ranked list of candidates — use it as the first step when you don't already know the
| Parameter | Type | Required | Notes |
|---|---|---|---|
| query | string | yes | User's material description, ideally already normalized to English (e.g. 'PA12', 'nylon', '316 stainless steel'). |
| category_hint | string | no | Optional coarse category filter matched against Material_Category(L1)/Material_Sub-Category(L2). |
| process_filter | string | no | Optional manufacturing process substring filter matched against Compatible_Processes, e.g. 'SLS', 'Selective Laser Sintering', 'Injection Molding'. |
| limit | number | no | Max candidates to return. Defaults to 10. |
Free
$0 forever
- Every tool — any call limit is its publisher’s, not ours
- No card, and mcprush charges nothing for it
- Runs at its publisher’s own address — this marketplace is not in the path
- Nothing to cap, because mcprush bills nothing
What counts against your monthly calls
| Tool | Unit | Calls used | Out of the allowance |
|---|
Nothing here is billable: mcprush charges nothing to install MechanoFab or to call it, at any volume.
Call allowance · this installenforced at the gateway
Monthly allowance, in calls
—
—
Alert at 80% · then the tool returns a normal MCP error
Used this month: —
—Grade not published
No rule-by-rule report on file for this release
Two independent axes, because powerful and malicious are different questions. The grade is threat only. The capability level is blast radius, and it is never a penalty on the grade — it is priced as one subtract-only term in the score, where you can see it.
This listing is an address its publisher runs, and you connect to it directly — this marketplace is not in the path. The scanner reads packages and public source, and an address is neither. So there is no grade — not a withheld one, an unmeasured one.
Release history
This is an address its publisher runs: which release it serves is theirs to choose, so there is nothing here to pin. The history below is for reading; the current release on file is 1.0.0.
1.0.0
undated
latestNo release note was published with this version.
—
no reviews yet
Who can review
One review per account, from a signed-in account that does not publish this listing. Nothing else is asked — you can say what you think before you install it. Publishers can reply once per review, and a review can be edited or deleted by whoever wrote it.
Sign in to write one
Any signed-in account that does not publish MechanoFab can review it, once — before installing it or after. A review from an account that has installed it is marked as one.
No reviews yet
Nobody has reviewed this listing. The rating on the card is the mean of the reviews written here and nothing else, so there is no rating until somebody writes the first — which takes a signed-in account that does not publish it, and nothing else.