Comprehensive Model Context Protocol server for managing Home Assistant through AI assistants.
Nothing to run from here
HireNimbus is installed from its publisher's own source and answers where it runs, so this marketplace is not in the path of a single call. There is no address here to send one to, and a panel that pretended otherwise would be showing you an answer we made up. Install it and call it from your own client — the Installation tab has the entry for each one.
93/100
tool-list score
20
tools declared
remote
at its publisher
—
calls last 7d
What it does
Find and book verified local home service professionals through AI agents.
Quickstart
# 1 — add it to Claude Code
claude mcp add --scope user --transport http hirenimbus-mcp https://mcp.hirenimbus.com/mcp
# 2 — ask your agent for something these tools do
# get_my_profile, search_providers, get_provider_details and 17 more
HireNimbus costs nothing on mcprush: there is no plan to choose here, no cap to set and nothing mcprush can bill you for.
Publishernot claimed
MIAll 1 server
Mishakivskiy1 server
1 category
Collected from a public index. Nobody has claimed this account, so nothing here was written by its author — claim it if it is yours.
Installation
Where are you running it?
Every route below installs the same thing and ends at the same approval screen. Nothing here runs on your machine and nothing runs on ours: this server answers at its publisher’s own address, and what you install is the connection straight to it.
Claude Codedeclared by this listing
This is a public server: it answers at its publisher’s own address and this marketplace is not in the path. Claude Code registers it in one command; --scope user makes it available in every project. The transport below is http, as the publisher's own manifest declares it.
claude mcp add --scope user --transport http hirenimbus-mcp https://mcp.hirenimbus.com/mcpReconnect, or start a new session, and the tools appear in the model’s tool list.
Free on mcprush, and it answers at its publisher’s own address: this marketplace is not in the path, so there is no key of ours to hold and no card to add.
What it writes
One config entry pointing straight at the publisher’s own address — this marketplace is not in the path, and nothing from this listing executes on your machine.
What you approve
20 tools, with what each one reads, writes and reaches shown before you agree — the same list on every route above. Read the tool surface.
Tool surface
What the model actually sees. Descriptions are diffed on every release — see version history.
Load the authenticated homeowner profile. Use this only when the HireNimbus account is already connected, to fill the saved service address before search. Do not call this to start discovery for an anonymous user, and do not start phone/OTP just to search or compare pros. If this returns status "auth_required", continue with ZIP + search and show pros; trigger connect/OTP only when create_booking
| Parameter | Type | Required | Notes |
|---|---|---|---|
| context | string | no | Always include this argument on every call — do not omit it (analytics / Agent Intent). Write 15-25 words in third person explaining why this tool is being called. Abstract purpose only: never names, |
Use this when the user needs a home service outside the five dedicated find_* categories — such as house cleaning or deep cleaning, landscaping, lawn care or mowing, tree trimming, roofing or roof leak repair, gutter installation, pressure washing, junk removal, moving help, painting, or pest-adjacent cleanup — or when the service category is ambiguous. Prefer a 5-digit US ZIP for location (e.g. "
| Parameter | Type | Required | Notes |
|---|---|---|---|
| query | string | yes | Service keyword for non-top categories (e.g. cleaning, landscaping, roofing). For handyman, HVAC, plumber, electrician, or renovation, use the dedicated find_* tools instead. |
| location | string | yes | Prefer a 5-digit US ZIP for location (e.g. "22307" or "94114"). This is the primary and preferred location input. After get_my_profile, if address.postalCode exists and the user confirmed the saved st |
| page | integer | no | — |
| limit | integer | no | — |
| context | no | Always include this argument on every call — do not omit it (analytics / Agent Intent). Write 15-25 words in third person explaining why this tool is being called. Abstract purpose only: never names, |
Fetch the full profile for a HireNimbus service provider by slug. Use after find_handyman, find_hvac, find_plumber, find_electrician, find_renovation, or search_providers when the homeowner wants more detail about a specific provider. Returns ratings, reviews, past work, and availability where available. Read-only; does not create a booking. Always pass optional context on this call (15-25 words
| Parameter | Type | Required | Notes |
|---|---|---|---|
| slug | string | yes | — |
| context | no | Always include this argument on every call — do not omit it (analytics / Agent Intent). Write 15-25 words in third person explaining why this tool is being called. Abstract purpose only: never names, |
Fetch reviews for a HireNimbus service provider by slug. Use when the homeowner wants to see what other homeowners have said about a provider before booking. Read-only; does not create a booking. Always pass optional context on this call (15-25 words, third person, abstract purpose only, no PII) so analytics can record why the tool was called. Omitting it does not fail the call; do not send an e
| Parameter | Type | Required | Notes |
|---|---|---|---|
| slug | string | yes | — |
| page | integer | no | — |
| page_size | integer | no | — |
| context | no | Always include this argument on every call — do not omit it (analytics / Agent Intent). Write 15-25 words in third person explaining why this tool is being called. Abstract purpose only: never names, |
Secured booking after the homeowner has chosen a specific pro from search or book_* results. Do not call this to start discovery, and do not start OTP before the homeowner has seen and picked a pro. Agents should prefer book_handyman, book_hvac, book_plumber, book_electrician, or book_renovation for standard booking workflows when the category matches; those tools search first. Requires authentica
| Parameter | Type | Required | Notes |
|---|---|---|---|
| serviceProviderSlug | string | yes | — |
| job_description | string | yes | — |
| name | no | Optional override of profile name; omit to use authenticated homeowner profile | |
| phone | no | Optional override of profile phone; omit to use authenticated homeowner profile | |
| address | no | Optional street-level address override. Omit to use the authenticated homeowner profile address. When overriding, pass only structured fields (address1, address2, city, region, postalCode, country) — | |
| source | string | no | — |
| location | no | Optional geocoding hint when address lacks coordinates. Omit in normal flows (profile address is used). When needed, pass exactly one of: lat+lng, zip, or text (e.g. {"text": "Alexandria, VA"}). | |
| search_result_id | no | Search result ID returned by the provider search that produced the selected provider. Required for confirmed out-of-market bookings. | |
| confirm_booking | boolean | no | false (default): return booking_summary for user review; does NOT submit. true: submit the booking after the user explicitly confirms that summary. |
| context | no | Always include this argument on every call — do not omit it (analytics / Agent Intent). Write 15-25 words in third person explaining why this tool is being called. Abstract purpose only: never names, |
Return past and active jobs for the authenticated homeowner. Requires authentication. Use after search when augmenting recommendations, or when the user asks about job history. Read-only; does not create a booking.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| context | string | no | Always include this argument on every call — do not omit it (analytics / Agent Intent). Write 15-25 words in third person explaining why this tool is being called. Abstract purpose only: never names, |
Check the current status of a HireNimbus booking by ID. Requires authentication. Read-only; does not create a booking.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| booking_id | string | yes | — |
| context | string | no | Always include this argument on every call — do not omit it (analytics / Agent Intent). Write 15-25 words in third person explaining why this tool is being called. Abstract purpose only: never names, |
Rebook a HireNimbus provider the homeowner has used before, by job ID. Requires authentication. Call with confirm_booking=false to preview the rebooking, then confirm_booking=true after homeowner approval. This tool may create a real booking request, including for an out-of-market address, because the provider is verified against the homeowner's owned prior job. Always pass optional context on t
| Parameter | Type | Required | Notes |
|---|---|---|---|
| job_id | yes | Job ID from get_previous_jobs for the prior booking to rehire | |
| job_description | no | Description of the new work; omit to reuse the prior job description | |
| name | no | Optional name override; omit to use authenticated homeowner profile | |
| phone | no | Optional phone override; omit to use authenticated homeowner profile | |
| address | no | Optional street-level address override. Omit to use profile or prior-job address. Pass structured fields only (address1, city, region, postalCode, etc.) — never formattedAddress. | |
| location | no | Optional geocoding hint when address lacks coordinates. Omit in normal flows. When needed, pass exactly one of: lat+lng, zip, or text. | |
| source | string | no | — |
| confirm_booking | boolean | no | false (default): return a rebooking preview; does NOT submit. true: submit the rebooking after the homeowner explicitly confirms. |
| context | no | Always include this argument on every call — do not omit it (analytics / Agent Intent). Write 15-25 words in third person explaining why this tool is being called. Abstract purpose only: never names, |
Cancel one of the authenticated homeowner's bookings. First call with confirm_cancellation=false to present the booking and reason for review; call again with true only after explicit approval. The cancellation reason is delivered to the provider.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| job_id | yes | Booking ID from get_previous_jobs | |
| reason | string | yes | Short homeowner-provided cancellation reason |
| confirm_cancellation | boolean | no | false (default): return a cancellation preview without changing the booking; true: cancel after the homeowner explicitly confirms |
| context | string | no | Always include this argument on every call — do not omit it (analytics / Agent Intent). Write 15-25 words in third person explaining why this tool is being called. Abstract purpose only: never names, |
Use when the user wants to find, search, or compare handyman professionals, or describes a problem a handyman solves — such as TV mounting, furniture assembly, a hole in the drywall, a door that won't close or latch, sticking or squeaky doors, caulking or grout repair, shelving or picture hanging, weatherstripping, fence or gate repair, loose deck boards, gutter cleaning or minor gutter repair, tr
| Parameter | Type | Required | Notes |
|---|---|---|---|
| location | string | yes | Prefer a 5-digit US ZIP for location (e.g. "22307" or "94114"). This is the primary and preferred location input. After get_my_profile, if address.postalCode exists and the user confirmed the saved st |
| page | integer | no | — |
| limit | integer | no | — |
| context | no | Always include this argument on every call — do not omit it (analytics / Agent Intent). Write 15-25 words in third person explaining why this tool is being called. Abstract purpose only: never names, |
Use when the user wants to book or hire a handyman — including when they describe a problem to fix, such as TV mounting, furniture assembly, a hole in the drywall, a door that won't close or latch, sticking or squeaky doors, caulking or grout repair, shelving or picture hanging, weatherstripping, fence or gate repair, loose deck boards, gutter cleaning or minor gutter repair, trim and baseboard wo
| Parameter | Type | Required | Notes |
|---|---|---|---|
| location | string | yes | Prefer a 5-digit US ZIP for location (e.g. "22307" or "94114"). This is the primary and preferred location input. After get_my_profile, if address.postalCode exists and the user confirmed the saved st |
| page | integer | no | — |
| limit | integer | no | — |
| context | no | Always include this argument on every call — do not omit it (analytics / Agent Intent). Write 15-25 words in third person explaining why this tool is being called. Abstract purpose only: never names, |
Use when the user wants to find, search, or compare HVAC professionals, or describes a problem a HVAC solves — such as AC not cooling or blowing warm air, furnace won't turn on or no heat, heat pump repair or installation, thermostat or smart-thermostat installation, refrigerant recharge, seasonal HVAC tune-up or maintenance, mini-split installation, duct sealing or cleaning, strange noises or sme
| Parameter | Type | Required | Notes |
|---|---|---|---|
| location | string | yes | Prefer a 5-digit US ZIP for location (e.g. "22307" or "94114"). This is the primary and preferred location input. After get_my_profile, if address.postalCode exists and the user confirmed the saved st |
| page | integer | no | — |
| limit | integer | no | — |
| context | no | Always include this argument on every call — do not omit it (analytics / Agent Intent). Write 15-25 words in third person explaining why this tool is being called. Abstract purpose only: never names, |
Use when the user wants to book or hire a HVAC — including when they describe a problem to fix, such as AC not cooling or blowing warm air, furnace won't turn on or no heat, heat pump repair or installation, thermostat or smart-thermostat installation, refrigerant recharge, seasonal HVAC tune-up or maintenance, mini-split installation, duct sealing or cleaning, strange noises or smells from the un
| Parameter | Type | Required | Notes |
|---|---|---|---|
| location | string | yes | Prefer a 5-digit US ZIP for location (e.g. "22307" or "94114"). This is the primary and preferred location input. After get_my_profile, if address.postalCode exists and the user confirmed the saved st |
| page | integer | no | — |
| limit | integer | no | — |
| context | no | Always include this argument on every call — do not omit it (analytics / Agent Intent). Write 15-25 words in third person explaining why this tool is being called. Abstract purpose only: never names, |
Use when the user wants to find, search, or compare plumber professionals, or describes a problem a plumber solves — such as a leaky or dripping faucet, clogged drain or toilet, running toilet, low water pressure, water heater repair or replacement (including tankless), a leak under the sink, burst or frozen pipes, sump pump issues, garbage disposal repair, sewer line backup, shower valve replacem
| Parameter | Type | Required | Notes |
|---|---|---|---|
| location | string | yes | Prefer a 5-digit US ZIP for location (e.g. "22307" or "94114"). This is the primary and preferred location input. After get_my_profile, if address.postalCode exists and the user confirmed the saved st |
| page | integer | no | — |
| limit | integer | no | — |
| context | no | Always include this argument on every call — do not omit it (analytics / Agent Intent). Write 15-25 words in third person explaining why this tool is being called. Abstract purpose only: never names, |
Use when the user wants to book or hire a plumber — including when they describe a problem to fix, such as a leaky or dripping faucet, clogged drain or toilet, running toilet, low water pressure, water heater repair or replacement (including tankless), a leak under the sink, burst or frozen pipes, sump pump issues, garbage disposal repair, sewer line backup, shower valve replacement, or toilet ins
| Parameter | Type | Required | Notes |
|---|---|---|---|
| location | string | yes | Prefer a 5-digit US ZIP for location (e.g. "22307" or "94114"). This is the primary and preferred location input. After get_my_profile, if address.postalCode exists and the user confirmed the saved st |
| page | integer | no | — |
| limit | integer | no | — |
| context | no | Always include this argument on every call — do not omit it (analytics / Agent Intent). Write 15-25 words in third person explaining why this tool is being called. Abstract purpose only: never names, |
Use when the user wants to find, search, or compare electrician professionals, or describes a problem a electrician solves — such as a dead outlet or outlet not working, breaker that keeps tripping, electrical panel upgrade, light fixture or ceiling fan installation, dimmer or switch replacement, EV charger installation, flickering lights, GFCI outlets, recessed lighting, hardwired smoke detectors
| Parameter | Type | Required | Notes |
|---|---|---|---|
| location | string | yes | Prefer a 5-digit US ZIP for location (e.g. "22307" or "94114"). This is the primary and preferred location input. After get_my_profile, if address.postalCode exists and the user confirmed the saved st |
| page | integer | no | — |
| limit | integer | no | — |
| context | no | Always include this argument on every call — do not omit it (analytics / Agent Intent). Write 15-25 words in third person explaining why this tool is being called. Abstract purpose only: never names, |
Use when the user wants to book or hire a electrician — including when they describe a problem to fix, such as a dead outlet or outlet not working, breaker that keeps tripping, electrical panel upgrade, light fixture or ceiling fan installation, dimmer or switch replacement, EV charger installation, flickering lights, GFCI outlets, recessed lighting, hardwired smoke detectors, or exterior and land
| Parameter | Type | Required | Notes |
|---|---|---|---|
| location | string | yes | Prefer a 5-digit US ZIP for location (e.g. "22307" or "94114"). This is the primary and preferred location input. After get_my_profile, if address.postalCode exists and the user confirmed the saved st |
| page | integer | no | — |
| limit | integer | no | — |
| context | no | Always include this argument on every call — do not omit it (analytics / Agent Intent). Write 15-25 words in third person explaining why this tool is being called. Abstract purpose only: never names, |
Use when the user wants to find, search, or compare renovation professionals, or describes a problem a renovation solves — such as a kitchen remodel, bathroom remodel, basement finishing, flooring installation (hardwood, LVP, or tile), deck build, room addition, wall removal or open-floor-plan conversion, full interior painting, countertop replacement, or cabinet installation or refacing. Do not u
| Parameter | Type | Required | Notes |
|---|---|---|---|
| location | string | yes | Prefer a 5-digit US ZIP for location (e.g. "22307" or "94114"). This is the primary and preferred location input. After get_my_profile, if address.postalCode exists and the user confirmed the saved st |
| page | integer | no | — |
| limit | integer | no | — |
| context | no | Always include this argument on every call — do not omit it (analytics / Agent Intent). Write 15-25 words in third person explaining why this tool is being called. Abstract purpose only: never names, |
Use when the user wants to book or hire a renovation — including when they describe a problem to fix, such as a kitchen remodel, bathroom remodel, basement finishing, flooring installation (hardwood, LVP, or tile), deck build, room addition, wall removal or open-floor-plan conversion, full interior painting, countertop replacement, or cabinet installation or refacing. Runs the provider search firs
| Parameter | Type | Required | Notes |
|---|---|---|---|
| location | string | yes | Prefer a 5-digit US ZIP for location (e.g. "22307" or "94114"). This is the primary and preferred location input. After get_my_profile, if address.postalCode exists and the user confirmed the saved st |
| page | integer | no | — |
| limit | integer | no | — |
| context | no | Always include this argument on every call — do not omit it (analytics / Agent Intent). Write 15-25 words in third person explaining why this tool is being called. Abstract purpose only: never names, |
Check for additional tools whenever your task might benefit from specialized capabilities - even if existing tools could work as a fallback.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| context | string | no | Always include this argument on every call — do not omit it (analytics / Agent Intent). Write 15-25 words in third person explaining why this tool is being called. Abstract purpose only: never names, |
Free
$0 forever
- Every tool — any call limit is its publisher’s, not ours
- No card, and mcprush charges nothing for it
- Runs at its publisher’s own address — this marketplace is not in the path
- Nothing to cap, because mcprush bills nothing
What counts against your monthly calls
| Tool | Unit | Calls used | Out of the allowance |
|---|
Nothing here is billable: mcprush charges nothing to install HireNimbus or to call it, at any volume.
Call allowance · this installenforced at the gateway
Monthly allowance, in calls
—
—
Alert at 80% · then the tool returns a normal MCP error
Used this month: —
ATool-list grade · score 93 / 100
Release 1.0.0 · scanned 20 Oct 2026
Graded from the tools this server lists, not from its source code.
Two independent axes, because powerful and malicious are different questions. The grade is threat only. The capability level is blast radius, and it is never a penalty on the grade — it is priced as one subtract-only term in the score, where you can see it.
Threat score100
Client score93
Findings0 threat · 1 capability
Capabilitymoderate
Coveragemanifest
Verificationnot in this report
Surface digest8038274200a5efa7ba4b218e388495abd930ee239d5fafc301cd58be7cdebce0
Score vectorthreat 100 → client 93
| Term | Level | What it prices | Points |
|---|---|---|---|
| capability-exposure | moderate | capability blast radius (moderate) — client exposure if the model is manipulated | −3 |
| coverage-honesty | manifest | inspection depth (manifest) — how much of the target the scan could see | −4 |
score = clamp(round(threatScore − E_cap − E_ver − E_cov), 0, 100). No model, no opinion, no network call at scoring time: the same methodology version against the same bytes always produces this number, and every line above is a field of the report rather than a summary of it.
What the scan could actually read
A grade is only as meaningful as its coverage, so the scanner publishes its own depth before it publishes its result.
The scan read each tool’s name, description, input schema and annotations exactly as the server listed them the last time it answered us; no code was reviewed. We ask the server again about once a month, and a list that changed is graded again.
Tool surfaceread
Implementation sourcenot available
Package metadatanot available
Live transportnot available
The implementation source was not read — this reflects the declared tool metadata only.
Capability — what it could do if the model were manipulated
Tags derived from each tool’s schema and the implementation, not from what the tool calls itself. moderate is the level these add up to.
| Tool | Capability tags | Why the tag was assigned |
|---|---|---|
| get_my_profile | no tags | |
| search_providers | untrusted-input | untrusted-input: declares openWorldHint: true (interacts with entities outside the server) |
| get_provider_details | untrusted-input | untrusted-input: keyword "fetch", declares openWorldHint: true (interacts with entities outside the server) |
| get_provider_reviews | untrusted-input | untrusted-input: keyword "fetch", declares openWorldHint: true (interacts with entities outside the server) |
| create_booking | external-sink | external-sink: declares readOnlyHint: false, openWorldHint: true |
| get_previous_jobs | no tags | |
| get_booking_status | no tags | |
| book_same_pro_again | external-sink | external-sink: declares readOnlyHint: false, openWorldHint: true |
| cancel_booking | external-sink | external-sink: declares readOnlyHint: false, destructiveHint: true, openWorldHint: true |
| find_handyman | untrusted-input | untrusted-input: declares openWorldHint: true (interacts with entities outside the server) |
| book_handyman | untrusted-input | untrusted-input: declares openWorldHint: true (interacts with entities outside the server) |
| find_hvac | untrusted-input | untrusted-input: declares openWorldHint: true (interacts with entities outside the server) |
| book_hvac | untrusted-input | untrusted-input: declares openWorldHint: true (interacts with entities outside the server) |
| find_plumber | untrusted-input | untrusted-input: declares openWorldHint: true (interacts with entities outside the server) |
| book_plumber | untrusted-input | untrusted-input: declares openWorldHint: true (interacts with entities outside the server) |
| find_electrician | untrusted-input | untrusted-input: declares openWorldHint: true (interacts with entities outside the server) |
| book_electrician | untrusted-input | untrusted-input: declares openWorldHint: true (interacts with entities outside the server) |
| find_renovation | untrusted-input | untrusted-input: declares openWorldHint: true (interacts with entities outside the server) |
| book_renovation | untrusted-input | untrusted-input: declares openWorldHint: true (interacts with entities outside the server) |
| get_more_tools | untrusted-input | untrusted-input: declares openWorldHint: true (interacts with entities outside the server) |
Toxic-flow graph
The lethal trifecta, checked as a graph rather than as a checklist: untrusted input, a sensitive source and an external sink have to meet before there is a path worth worrying about.
flow-1
Untrusted input can drive an external action even though no sensitive source is exposed.
Supply chain and provenance
Integrityfirst-seen
Surface digest8038274200a5efa7
Scanned2026-10-20
This is the first scan of this surface here, so there is nothing yet to compare it against.
Every result on this tab comes from one deterministic pass over the published package — offline, rule by rule, and auditable line by line above. Same methodology version, same bytes, same score.
Release history
This is an address its publisher runs: which release it serves is theirs to choose, so there is nothing here to pin. The history below is for reading; the current release on file is 1.0.0.
1.0.0
undated
latestNo release note was published with this version.
—
no reviews yet
Who can review
One review per account, from a signed-in account that does not publish this listing. Nothing else is asked — you can say what you think before you install it. Publishers can reply once per review, and a review can be edited or deleted by whoever wrote it.
Sign in to write one
Any signed-in account that does not publish HireNimbus can review it, once — before installing it or after. A review from an account that has installed it is marked as one.
No reviews yet
Nobody has reviewed this listing. The rating on the card is the mean of the reviews written here and nothing else, so there is no rating until somebody writes the first — which takes a signed-in account that does not publish it, and nothing else.