MCP server that wraps the Dagster GraphQL API — manage runs, assets, schedules, sensors, and backfills from any MCP client
Nothing to run from here
MVisionPro Engineering Tools is installed from its publisher's own source and answers where it runs, so this marketplace is not in the path of a single call. There is no address here to send one to, and a panel that pretended otherwise would be showing you an answer we made up. Install it and call it from your own client — the Installation tab has the entry for each one.
6
tools declared
—
trust score
remote
at its publisher
—
calls last 7d
What it does
Read-only machine-vision calculations for optics, interfaces, line scan, sensors, and models.
Quickstart
# 1 — add it to Claude Code
claude mcp add --scope user --transport http mvisionpro-engineering-tools-mcp https://mvisionpro.com/tools/mcp
# 2 — ask your agent for something these tools do
# optics, interface, linescan and 3 more
MVisionPro Engineering Tools costs nothing on mcprush: there is no plan to choose here, no cap to set and nothing mcprush can bill you for.
Publishernot claimed
MVAll 1 server
mvisionpro1 server
1 category
Collected from a public index. Nobody has claimed this account, so nothing here was written by its author — claim it if it is yours.
Installation
Where are you running it?
Every route below installs the same thing and ends at the same approval screen. Nothing here runs on your machine and nothing runs on ours: this server answers at its publisher’s own address, and what you install is the connection straight to it.
Claude Codedeclared by this listing
This is a public server: it answers at its publisher’s own address and this marketplace is not in the path. Claude Code registers it in one command; --scope user makes it available in every project. The transport below is http, as the publisher's own manifest declares it.
claude mcp add --scope user --transport http mvisionpro-engineering-tools-mcp https://mvisionpro.com/tools/mcpReconnect, or start a new session, and the tools appear in the model’s tool list.
Free on mcprush, and it answers at its publisher’s own address: this marketplace is not in the path, so there is no key of ours to hold and no card to add.
What it writes
One config entry pointing straight at the publisher’s own address — this marketplace is not in the path, and nothing from this listing executes on your machine.
What you approve
6 tools, with what each one reads, writes and reaches shown before you agree — the same list on every route above. Read the tool surface.
Tool surface
What the model actually sees. Descriptions are diffed on every release — see version history.
Calculate camera geometry, object sampling, exposure and depth of field. Provide exactly one sensor source: camera, sensor, or both manual sensor axes. Camera cannot be combined with manual passport fields. fovMm and wdMm are always required.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| camera | string | no | Catalog camera model; exclusive with sensor or manual sensor axes. |
| sensor | string | no | Optical format; exclusive with camera or manual sensor axes. |
| sensorWidthMm | number | no | Manual active sensor width in millimetres; use with sensorHeightMm. |
| sensorHeightMm | number | no | Manual active sensor height in millimetres; use with sensorWidthMm. |
| resolutionWidthPx | integer | no | Manual horizontal resolution; use with resolutionHeightPx. |
| resolutionHeightPx | integer | no | Manual vertical resolution; use with resolutionWidthPx. |
| pixelSizeXUm | number | no | Manual horizontal pixel size in micrometres; use with pixelSizeYUm. |
| pixelSizeYUm | number | no | Manual vertical pixel size in micrometres; use with pixelSizeXUm. |
| fovMm | number | yes | Field-of-view width in millimetres. |
| fovHeightMm | number | no | Optional field-of-view height in millimetres. |
| wdMm | number | yes | Working distance in millimetres. |
| defectMm | number | no | Feature size in millimetres. |
| nPx | number | no | Pixels required across a feature. |
| speedMmS | number | no | Object speed in millimetres per second. |
| blurPx | number | no | Allowed motion blur in pixels. |
| fNumber | number | no | Lens F-number. |
| motionAxis | string | no | Motion axis. |
| lang | string | no | Presentation language. |
Calculate stream bandwidth and evaluate interface options. Provide either camera or the complete manual stream set widthPx, heightPx, fps, bits, streamType and packed; do not combine the two modes. width and height are independent aliases for widthPx and heightPx, so mixed alias pairs are accepted, but do not send both aliases for one axis. The discovery alternatives describe complete sets; execut
| Parameter | Type | Required | Notes |
|---|---|---|---|
| camera | string | no | Catalog camera model; exclusive with manual stream fields. |
| width | integer | no | Alias for widthPx; do not send both. |
| height | integer | no | Alias for heightPx; do not send both. |
| widthPx | integer | no | Manual frame width in pixels. |
| heightPx | integer | no | Manual frame height in pixels. |
| fps | number | no | Frame rate. |
| bits | integer | no | Logical bit depth. |
| streamType | string | no | Stream type. |
| packed | boolean | no | Whether a greater-than-eight-bit stream is packed. |
| cameras | integer | no | Camera count. |
| interface | string | no | Optional interface family to evaluate. |
| cableLengthM | number | no | Cable length in metres. |
| lang | string | no | Presentation language. |
Calculate line width, line rate, exposure and confirmed camera modes. widthMm is required. Provide exactly one speed field (speedMmS or speedMMin) and exactly one calculation set (defectMm+nPx or accuracyMm+kPx); mode is inferred when omitted. samplingMode defaults to xy, or to width when longitudinalStepMm is present.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| widthMm | number | yes | Inspected web width in millimetres. |
| speedMmS | number | no | Speed in millimetres per second; exclusive with speedMMin. |
| speedMMin | number | no | Alternative speed in metres per minute; exclusive with speedMmS. |
| mode | string | no | Calculation mode; inferred from the exclusive defect or accuracy input set when omitted. |
| defectMm | number | no | Minimum defect for detect mode. |
| nPx | number | no | Pixels per defect for detect mode. |
| accuracyMm | number | no | Allowed error for measure-v2 mode. |
| kPx | integer | no | Sampling coefficient for measure-v2 mode. |
| samplingMode | string | no | Two-axis or explicit longitudinal sampling. |
| longitudinalStepMm | number | no | Required when samplingMode is width. |
| marginPct | number | no | Line-rate reserve percentage. |
| dutyCycle | number | no | Fraction of a line period available for exposure. |
| camera | string | no | Optional line-scan camera model. |
| interface | string | no | Optional interface family filter. |
| pixelFormat | string | no | Optional confirmed mode pixel format. |
| tdiStages | integer | no | Optional TDI stage requirement. |
| lang | string | no | Presentation language. |
Compare one unambiguous competitor model with bounded Hikrobot candidates. Compare one unambiguous competitor model with a bounded set of public Hikrobot candidates.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| q | string | yes | Competitor model. |
| limit | integer | no | Maximum results. |
| lang | string | no | Presentation language. |
Get a sensor aggregation by exactly one camera model or sensor part. Provide exactly one lookup key: a catalog camera model or a sensor part number.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| model | string | no | Catalog camera model; exclusive with sensor. |
| sensor | string | no | Sensor part number; exclusive with model. |
| lang | string | no | Presentation language. |
Search the bounded public catalog projection. Search the bounded public catalog projection by literal model, alias, SKU or slug.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| q | string | yes | Literal model, alias, SKU or slug search. |
| limit | integer | no | Maximum results. |
| lang | string | no | Presentation language. |
Free
$0 forever
- Every tool — any call limit is its publisher’s, not ours
- No card, and mcprush charges nothing for it
- Runs at its publisher’s own address — this marketplace is not in the path
- Nothing to cap, because mcprush bills nothing
What counts against your monthly calls
| Tool | Unit | Calls used | Out of the allowance |
|---|
Nothing here is billable: mcprush charges nothing to install MVisionPro Engineering Tools or to call it, at any volume.
Call allowance · this installenforced at the gateway
Monthly allowance, in calls
—
—
Alert at 80% · then the tool returns a normal MCP error
Used this month: —
—Grade not published
No rule-by-rule report on file for this release
Two independent axes, because powerful and malicious are different questions. The grade is threat only. The capability level is blast radius, and it is never a penalty on the grade — it is priced as one subtract-only term in the score, where you can see it.
This listing is an address its publisher runs, and you connect to it directly — this marketplace is not in the path. The scanner reads packages and public source, and an address is neither. So there is no grade — not a withheld one, an unmeasured one.
Release history
This is an address its publisher runs: which release it serves is theirs to choose, so there is nothing here to pin. The history below is for reading; the current release on file is 1.0.0.
1.0.0
undated
latestNo release note was published with this version.
—
no reviews yet
Who can review
One review per account, from a signed-in account that does not publish this listing. Nothing else is asked — you can say what you think before you install it. Publishers can reply once per review, and a review can be edited or deleted by whoever wrote it.
Sign in to write one
Any signed-in account that does not publish MVisionPro Engineering Tools can review it, once — before installing it or after. A review from an account that has installed it is marked as one.
No reviews yet
Nobody has reviewed this listing. The rating on the card is the mean of the reviews written here and nothing else, so there is no rating until somebody writes the first — which takes a signed-in account that does not publish it, and nothing else.