Comprehensive Model Context Protocol server for managing Home Assistant through AI assistants.
Nothing to run from here
NebenkostenPro is installed from its publisher's own source and answers where it runs, so this marketplace is not in the path of a single call. There is no address here to send one to, and a panel that pretended otherwise would be showing you an answer we made up. Install it and call it from your own client — the Installation tab has the entry for each one.
9
tools declared
—
trust score
remote
at its publisher
—
calls last 7d
What it does
German housing costs: utility costs of 400 cities, property tax rates, housing benefit, deadlines.
Quickstart
# 1 — add it to Claude Code
claude mcp add --scope user --transport http nebenkostenpro-mcp https://nebenkostenpro.de/mcp
# 2 — ask your agent for something these tools do
# start_bill_check, start_bill_creation, search_places and 6 more
NebenkostenPro costs nothing on mcprush: there is no plan to choose here, no cap to set and nothing mcprush can bill you for.
Publishernot claimed
NEAll 1 server
nebenkostenpro1 server
1 category
Collected from a public index. Nobody has claimed this account, so nothing here was written by its author — claim it if it is yours.
Installation
Where are you running it?
Every route below installs the same thing and ends at the same approval screen. Nothing here runs on your machine and nothing runs on ours: this server answers at its publisher’s own address, and what you install is the connection straight to it.
Claude Codedeclared by this listing
This is a public server: it answers at its publisher’s own address and this marketplace is not in the path. Claude Code registers it in one command; --scope user makes it available in every project. The transport below is http, as the publisher's own manifest declares it.
claude mcp add --scope user --transport http nebenkostenpro-mcp https://nebenkostenpro.de/mcpReconnect, or start a new session, and the tools appear in the model’s tool list.
Free on mcprush, and it answers at its publisher’s own address: this marketplace is not in the path, so there is no key of ours to hold and no card to add.
What it writes
One config entry pointing straight at the publisher’s own address — this marketplace is not in the path, and nothing from this listing executes on your machine.
What you approve
9 tools, with what each one reads, writes and reaches shown before you agree — the same list on every route above. Read the tool surface.
Tool surface
What the model actually sees. Descriptions are diffed on every release — see version history.
Für Mieter, die ihre eigene Nebenkostenabrechnung prüfen lassen möchten. Liefert den Link zur Prüfung bei NebenkostenPro (Abrechnung als PDF oder Foto hochladen, kostenlose Vorschau, Prüfung jeder Position gegen Betriebskosten- und Heizkostenverordnung), den Ablauf und, wenn das Zugangsdatum bekannt ist, bis wann Einwände möglich sind. Den Link unverändert an den Nutzer weitergeben. (EN: For tenan
No parameter schema on file.
Für Vermieter und Hausverwaltungen, die eine Nebenkostenabrechnung erstellen müssen. Liefert den Link zu NebenkostenPro (Belege hochladen, Kosten werden nach Betriebskostenverordnung verteilt, fertige Abrechnung als PDF), den Ablauf und, wenn das Ende des Abrechnungszeitraums bekannt ist, die Abrechnungsfrist. Den Link unverändert an den Nutzer weitergeben. (EN: For landlords who need to prepare a
No parameter schema on file.
Sucht deutsche Städte und Gemeinden nach Namen und liefert den eindeutigen Slug für die anderen Tools. Nützlich bei mehrdeutigen Namen (z. B. 'Neuenkirchen' gibt es mehrfach). Zeigt auch, ob für den Ort ein ausführliches Nebenkosten-Profil (400 größte Städte) vorliegt. (EN: Search German cities and municipalities by name and get the slug used by the other tools.)
No parameter schema on file.
Nebenkosten-Kennzahlen einer der 400 größten deutschen Städte: Grundsteuer-Hebesatz, Frischwasser- und Abwasserpreis, Müllgebühren sowie Vergleichswerte für Heizung, Versicherung, Gartenpflege und Hauswart. Jeder Wert mit Datenstand und Datenqualität (belegt, Modellwert oder Richtwert). (EN: Utility and service charges (Nebenkosten) for the 400 largest German cities: property tax rate, water, sewa
No parameter schema on file.
Grundsteuer-Hebesätze (B und, falls vorhanden, A) für jede deutsche Gemeinde, mit Landes- und Bundesdurchschnitt, Datenstand und Quelle. Grundsteuer = Messbetrag x Hebesatz / 100. (EN: German property tax (Grundsteuer) multiplier rates for every municipality, with state and national averages.)
No parameter schema on file.
Wohngeld-Mietstufe (I bis VII) eines deutschen Ortes und die monatlichen Höchstbeträge für Miete nach § 12 WoGG je Haushaltsgröße. Das tatsächliche Wohngeld hängt zusätzlich vom Einkommen ab. (EN: German housing benefit (Wohngeld) rent level of a place and the monthly maximum rent amounts by household size.)
No parameter schema on file.
Berechnet die Abrechnungsfrist des Vermieters (12 Monate nach Ende des Abrechnungszeitraums, § 556 Abs. 3 S. 2 BGB) und, wenn das Zugangsdatum bekannt ist, die Einwendungsfrist des Mieters (12 Monate nach Zugang, § 556 Abs. 3 S. 5 BGB). Datum als JJJJ-MM-TT oder TT.MM.JJJJ. (EN: Deadlines for German utility bills: landlord billing deadline and tenant objection deadline.)
No parameter schema on file.
Statistik aus der Prüfung echter Nebenkostenabrechnungen bei NebenkostenPro: zu welchen Themen (Heizung, Umlageschlüssel, Wasser, Hausmeister ...) die Prüfung wie oft Rückfragen markiert und wie viele Hinweise eine Abrechnung im Median hat. Laufend aktualisiert, mit Methodik und Zitierhinweis. Passt zu Fragen wie 'Wie oft sind Nebenkostenabrechnungen falsch?' oder 'Was ist in Nebenkostenabrechnung
No parameter schema on file.
Die 17 umlagefähigen Betriebskostenarten nach § 2 BetrKV mit üblichem Verteilerschlüssel sowie typische Kosten, die nicht umgelegt werden dürfen (Verwaltung, Instandhaltung, Rücklagen). (EN: The 17 operating cost types landlords in Germany may pass on to tenants (§ 2 BetrKV) and typical costs they may not.)
No parameter schema on file.
Free
$0 forever
- Every tool — any call limit is its publisher’s, not ours
- No card, and mcprush charges nothing for it
- Runs at its publisher’s own address — this marketplace is not in the path
- Nothing to cap, because mcprush bills nothing
What counts against your monthly calls
| Tool | Unit | Calls used | Out of the allowance |
|---|
Nothing here is billable: mcprush charges nothing to install NebenkostenPro or to call it, at any volume.
Call allowance · this installenforced at the gateway
Monthly allowance, in calls
—
—
Alert at 80% · then the tool returns a normal MCP error
Used this month: —
—Grade not published
No rule-by-rule report on file for this release
Two independent axes, because powerful and malicious are different questions. The grade is threat only. The capability level is blast radius, and it is never a penalty on the grade — it is priced as one subtract-only term in the score, where you can see it.
This listing is an address its publisher runs, and you connect to it directly — this marketplace is not in the path. The scanner reads packages and public source, and an address is neither. So there is no grade — not a withheld one, an unmeasured one.
Release history
This is an address its publisher runs: which release it serves is theirs to choose, so there is nothing here to pin. The history below is for reading; the current release on file is 1.0.0.
1.0.0
undated
latestNo release note was published with this version.
—
no reviews yet
Who can review
One review per account, from a signed-in account that does not publish this listing. Nothing else is asked — you can say what you think before you install it. Publishers can reply once per review, and a review can be edited or deleted by whoever wrote it.
Sign in to write one
Any signed-in account that does not publish NebenkostenPro can review it, once — before installing it or after. A review from an account that has installed it is marked as one.
No reviews yet
Nobody has reviewed this listing. The rating on the card is the mean of the reviews written here and nothing else, so there is no rating until somebody writes the first — which takes a signed-in account that does not publish it, and nothing else.