Verified conversions across 205 color spaces: CSS strings, gamut checks, .cube LUTs
Nothing to run from here
SolidWorks is installed from its publisher's own source and answers where it runs, so this marketplace is not in the path of a single call. There is no address here to send one to, and a panel that pretended otherwise would be showing you an answer we made up. Install it and call it from your own client — the Installation tab has the entry for each one.
94/100
trust score
101
tools declared
local
runs on your machine
—
downloads a day
What it does
Model, measure and verify parametric parts and assemblies in a running SolidWorks (Windows).
Quickstart
# 1 — add it to Claude Code
claude mcp add --scope user nejcdvorsek-solidworks-mcp '--' uvx sw-mcp
# 2 — ask your agent for something these tools do
# get_status, new_document, add_box and 98 more
SolidWorks costs nothing on mcprush: there is no plan to choose here, no cap to set and nothing mcprush can bill you for.
Publishernot claimed
NEAll 1 server
NejcDvorsek1 server
1 category
Collected from a public index. Nobody has claimed this account, so nothing here was written by its author — claim it if it is yours.
Installation
Where are you running it?
Every route below installs the same thing and ends at the same approval screen. This one runs on your machine: your client starts SolidWorks as a process under your own user, with your files and your network, so the tool surface below is what it can do to your computer rather than to a server somewhere else. Its scan result is on the Security tab — read the surface before you approve it.
Claude Codedeclared by this listing
This is a public server: you run it yourself and this marketplace is not in the path. You need uv (docs.astral.sh/uv): uvx comes with it. Claude Code registers it in one command; --scope user makes it available in every project. The '--' is in quotes so that PowerShell passes it on.
claude mcp add --scope user nejcdvorsek-solidworks-mcp '--' uvx sw-mcpReconnect, or start a new session, and the tools appear in the model’s tool list.
Free on mcprush, and it runs from its publisher’s own package: this marketplace is not in the path, so there is no key of ours to hold and no card to add.
What it writes
One config entry your client uses to start the process locally. A local server runs with your file system and your network, which is why it is priced without metering.
What you approve
101 tools, with what each one reads, writes and reaches shown before you agree — the same list on every route above. Read the tool surface.
Tool surface
What the model actually sees. Descriptions are diffed on every release — see version history.
Read from its source code. A server that builds its tool list when it starts can list more tools than this.
Report whether SolidWorks is reachable, its revision, this server's version, and the active/current part.
Takes no parameters.
Create a new empty part (kind='part') or assembly (kind='assembly'); it becomes the current document.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| kind | string | no | — |
Add a rectangular block: sketch width x height on the first plane, extrude by depth.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| width_mm | number | yes | — |
| height_mm | number | yes | — |
| depth_mm | number | yes | — |
| name | string | no | — |
Extrude a closed polygon into a solid; it is auto-closed.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| points_mm | array | yes | — |
| depth_mm | number | yes | — |
| face | string | no | — |
| plane | string | no | — |
| reverse | boolean | no | — |
| name | string | no | — |
| corner_radii_mm | number/array | no | — |
| rotate_deg | number | no | — |
| about_mm | array | no | — |
| draft_deg | number | no | — |
| merge | boolean | no | — |
| spline | boolean | no | — |
Create a disc/puck/flange: a circle extruded along +Z, centred at (x_mm, y_mm).
| Parameter | Type | Required | Notes |
|---|---|---|---|
| diameter_mm | number | yes | — |
| thickness_mm | number | yes | — |
| name | string | no | — |
| x_mm | number | no | — |
| y_mm | number | no | — |
Create a cylinder by revolving a profile 360° about an axis.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| diameter_mm | number | yes | — |
| height_mm | number | yes | — |
| name | string | no | — |
Create a cone/frustum by revolving a trapezoidal profile 360°.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| bottom_diameter_mm | number | yes | — |
| top_diameter_mm | number | yes | — |
| height_mm | number | yes | — |
| name | string | no | — |
Revolve a closed profile on the Front plane about an axis in it.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| profile_mm | array | yes | — |
| angle_deg | number | no | — |
| name | string | no | — |
| corner_radii_mm | number/array | no | — |
| axis_mm | array | no | — |
Sweep a circular profile (pipe/tube/rod) along a 2D path on the Front plane.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| path_mm | array | yes | — |
| diameter_mm | number | yes | — |
| bend_radius_mm | number | no | — |
| name | string | no | — |
| smooth | boolean | no | — |
Sweep an arbitrary closed PROFILE (cross-section) along a 2D PATH.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| profile_mm | array | yes | — |
| path_mm | array | yes | — |
| bend_radius_mm | number | no | — |
| name | string | no | — |
| corner_radii_mm | number/array | no | — |
Loft (blend) 2+ closed profiles, given one of two ways.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| sketches | array | no | — |
| cut | boolean | no | — |
| profiles_mm | array | no | — |
| heights_mm | array | no | — |
| name | string | no | — |
Cut a polygonal pocket, slot or window; the polygon is auto-closed.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| points_mm | array | yes | — |
| depth_mm | number | no | — |
| face | string | no | — |
| plane | string | no | — |
| name | string | no | — |
| corner_radii_mm | number/array | no | — |
| rotate_deg | number | no | — |
| about_mm | array | no | — |
| keep_inside | boolean | no | — |
Make a reference plane to sketch on: an offset or a turned plane, its position a dimension.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| base | string | no | — |
| offset_mm | number | no | — |
| angle_deg | number | no | — |
| about | string | no | — |
| name | string | no | — |
| normal | array | no | — |
| through | array | no | — |
List the part's solid bodies: name, volume and bounding box.
Takes no parameters.
Combine solid bodies of the part into main (a list_bodies name).
| Parameter | Type | Required | Notes |
|---|---|---|---|
| operation | string | yes | — |
| main | string | yes | — |
| tools | array | no | — |
| name | string | no | — |
Split the part's body in two along a plane (front/top/right or a plane by name).
| Parameter | Type | Required | Notes |
|---|---|---|---|
| plane | string | yes | — |
| name | string | no | — |
Cut a real, printable ISO metric thread (SolidWorks' own Thread feature).
| Parameter | Type | Required | Notes |
|---|---|---|---|
| size | string | yes | — |
| x_mm | number | yes | — |
| y_mm | number | yes | — |
| z_mm | number | yes | — |
| length_mm | number | yes | — |
| internal | boolean | no | — |
| name | string | no | — |
Add a straight stiffening rib / gusset in a plane parallel to the Front plane.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| start_mm | array | yes | — |
| end_mm | array | yes | — |
| toward_mm | array | yes | — |
| thickness_mm | number | yes | — |
| z_mm | number | yes | — |
| name | string | no | — |
Cut a round hole. Which one follows from the arguments:
| Parameter | Type | Required | Notes |
|---|---|---|---|
| x_mm | number | yes | — |
| y_mm | number | yes | — |
| z_mm | number | no | — |
| diameter_mm | number | no | — |
| face | string | no | — |
| depth_mm | number | no | — |
| cbore_diameter_mm | number | no | — |
| cbore_depth_mm | number | no | — |
| iso | string | no | — |
| size | string | no | — |
| fit | string | no | — |
| thread | string | no | — |
| name | string | no | — |
Grow a round boss (standoff, peg) height_mm out of ANY planar face, centred at (x, y, z) mm.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| diameter_mm | number | yes | — |
| face | string | yes | — |
| x_mm | number | yes | — |
| y_mm | number | yes | — |
| z_mm | number | yes | — |
| height_mm | number | yes | — |
| name | string | no | — |
Engrave text into ANY planar face, or emboss it with emboss=True (labels, version numbers).
| Parameter | Type | Required | Notes |
|---|---|---|---|
| text | string | yes | — |
| face | string | yes | — |
| x_mm | number | yes | — |
| y_mm | number | yes | — |
| z_mm | number | yes | — |
| height_mm | number | yes | — |
| depth_mm | number | yes | — |
| emboss | boolean | no | — |
| font | string | no | — |
| name | string | no | — |
Pocket a planar face, leaving a rim rim_mm wide along its outline.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| face | string | yes | — |
| x_mm | number | yes | — |
| y_mm | number | yes | — |
| z_mm | number | yes | — |
| rim_mm | number | yes | — |
| depth_mm | number | no | — |
| name | string | no | — |
Cut a straight slotted hole (obround) on the +Z face.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| length_mm | number | yes | — |
| width_mm | number | yes | — |
| x_mm | number | yes | — |
| y_mm | number | yes | — |
| angle_deg | number | no | — |
| depth_mm | number | no | — |
| name | string | no | — |
Extrude a stadium (rounded tab, lug or link) from point start_mm to end_mm ([x, y] mm).
| Parameter | Type | Required | Notes |
|---|---|---|---|
| start_mm | array | yes | — |
| end_mm | array | yes | — |
| width_mm | number | yes | — |
| depth_mm | number | yes | — |
| name | string | no | — |
Extrude an existing sketch of the current part by name, e.g. one a person drew.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| sketch | string | yes | — |
| depth_mm | number | no | — |
| reverse | boolean | no | — |
| name | string | no | — |
| up_to | string | no | — |
Draw a sketch of lines, arcs and splines on a plane, fully defined, to extrude or cut.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| plane | string | yes | — |
| start_mm | array | yes | — |
| segments | array | yes | — |
| name | string | no | — |
| fixed | boolean | no | — |
Cut an existing sketch of the current part by name into the body.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| sketch | string | yes | — |
| depth_mm | number | no | — |
| reverse | boolean | no | — |
| name | string | no | — |
Round edges of the current part with one constant radius (mm).
| Parameter | Type | Required | Notes |
|---|---|---|---|
| radius_mm | number | yes | — |
| edges | string | no | — |
| name | string | no | — |
| radii_at_mm | array | no | — |
| skip_shorter_mm | number | no | — |
| tangent_propagation | boolean | no | — |
Round a rib's top off completely: a full round fillet, as on a moulded part.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| face | string | yes | — |
| x_mm | number | yes | — |
| y_mm | number | yes | — |
| z_mm | number | yes | — |
| name | string | no | — |
Chamfer edges of the current part: distance_mm back along a face, at angle_deg (default 45°) to it.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| distance_mm | number | yes | — |
| edges | string | no | — |
| name | string | no | — |
| angle_deg | number | no | — |
| from_face | string | no | — |
Repeat a feature count times, spacing_mm apart, along a direction.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| count | integer | yes | — |
| spacing_mm | number | yes | — |
| direction | string | no | — |
| feature_name | string | no | — |
Repeat a feature count times evenly around 360° about an axis.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| count | integer | yes | — |
| center_x_mm | number | no | — |
| center_y_mm | number | no | — |
| feature_name | string | no | — |
| axis | string | no | — |
| angle_deg | number | no | — |
A reference axis anywhere: through=[[x, y, z], [dx, dy, dz]] (point and direction, model mm) or where two planes meet (planes=['Plane1', 'right']).
| Parameter | Type | Required | Notes |
|---|---|---|---|
| through | array | no | — |
| planes | array | no | — |
| name | string | no | — |
Run Python against the live SolidWorks: a whole part in one call, or what no tool covers; only when the server runs with --allow-scripts.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| code | string | no | — |
| path | string | no | — |
| image | string | no | — |
Mirror features, or the whole body, about the 'front'/'top'/'right' plane moved offset_mm.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| plane | string | yes | — |
| offset_mm | number | no | — |
| features | array | no | — |
| name | string | no | — |
Hollow the current part to a wall of thickness_mm, opening one face.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| thickness_mm | number | yes | — |
| open_face | string | no | — |
Set a named driving dimension (e.g. 'D1@BlockExtrude') in mm, rebuild, and remeasure.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| dimension_name | string | yes | — |
| value_mm | number | yes | — |
Cross-sections of an STL/3MF mesh at the given heights along axis 'x'/'y'/'z'.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| path | string | yes | — |
| axis | string | yes | — |
| heights_mm | array | yes | — |
| frame | string | no | — |
Compare the current part's cross-sections with a reference mesh's at the same heights.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| path | string | yes | — |
| axis | string | yes | — |
| heights_mm | array | yes | — |
| frame | string | no | — |
| offset_mm | array | no | — |
List every dimension in the current part: name (for set_dimension), feature, value, unit.
Takes no parameters.
Read a sketch of the current part back, e.g. one a person drew (a list_features name).
| Parameter | Type | Required | Notes |
|---|---|---|---|
| name | string | yes | — |
List the current part's modelling history in tree order: name, type, suppressed.
Takes no parameters.
Delete a feature (a list_features name) with its sketch, then rebuild and remeasure.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| name | string | yes | — |
| with_children | boolean | no | — |
| with_equations | boolean | no | — |
| dry_run | boolean | no | — |
Suppress a feature, or bring it back with suppress=False; rebuild and remeasure.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| name | string | yes | — |
| suppress | boolean | no | — |
Move a feature (a list_features name), with its sketch, to just before another one; rebuild and remeasure.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| name | string | yes | — |
| before | string | yes | — |
Colour and/or see-through of the current part, or of one component in an assembly.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| rgb | array | no | — |
| transparency | number | no | — |
| component | string | no | — |
Assign a material by name (e.g. "6061 Alloy", "AISI 1020", "ABS").
| Parameter | Type | Required | Notes |
|---|---|---|---|
| name | string | yes | — |
| database | string | no | — |
| density_kg_m3 | number | no | — |
Add an equation, or replace the one that sets the same name; rebuild and remeasure.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| equation | string/array | yes | — |
List the equations and global variables: index, equation, name it sets, value, global.
Takes no parameters.
Delete an equation by the name it sets ("L_thigh", "D1@Boss") or its list_equations index.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| equation | string | yes | — |
List the documents open in SolidWorks: title, path (empty until saved), type, unsaved changes.
Takes no parameters.
Make an open document current again by its title, also a new one that was never saved.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| title | string | yes | — |
Delete a mate of the current assembly by name (list_components, or add_mate's 'mate').
| Parameter | Type | Required | Notes |
|---|---|---|---|
| name | string/array | yes | — |
Suppress a mate so it stops holding its components (it stays in the tree), or bring it back.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| name | string | yes | — |
| suppress | boolean | no | — |
Remove a component from the current assembly, with the mates that hold it.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| component | string | yes | — |
Swap a top-level component for another .sldprt or .sldasm, in the same place.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| component | string | yes | — |
| path | string | yes | — |
Force a rebuild of the current part or assembly and report whether it rebuilt without errors.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| top_only | boolean | no | — |
Get volume (mm^3), mass (kg), surface area (mm^2), centre of mass, and bounding box.
Takes no parameters.
Get the bounding box (min/max/size in mm) of the current part, tight, or of the whole assembly.
Takes no parameters.
List the part's faces (index, planar?, normal, area, centre) for inspection.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| component | string | no | — |
List the part's edges: index, type, length, ends; lines also axis and midpoint.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| face | string | no | — |
| feature | string | no | — |
| within_mm | array | no | — |
| min_length_mm | number | no | — |
Check the current part for 3D printing, built along up ('+z', '-y', ...).
| Parameter | Type | Required | Notes |
|---|---|---|---|
| up | string | no | — |
| overhang_deg | number | no | — |
| min_wall_mm | number | no | — |
Export the current part or assembly to STEP/STL/IGES/Parasolid/3MF (format from extension).
| Parameter | Type | Required | Notes |
|---|---|---|---|
| path | string | yes | — |
| file_format | string | no | — |
| quality | string | no | — |
| deviation_mm | number | no | — |
| angle_deg | number | no | — |
| per_component | boolean | no | — |
Save a screenshot of the current part or assembly (PNG/JPG/TIF).
| Parameter | Type | Required | Notes |
|---|---|---|---|
| path | string | yes | — |
| view | string | no | — |
| zoom_mm | array | no | — |
| show_planes | boolean | no | — |
| from_dir | array | no | — |
Make a manufacturing drawing of the current part in one call: PDF, .slddrw, DXF or DWG.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| path | string | yes | — |
| sheet | string | no | — |
| scale | string | no | — |
| keep_open | boolean | no | — |
Build a drawing from scratch from a spec; edit the spec and rebuild to fine-tune.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| spec | object | yes | — |
| path | string | no | — |
The current drawing's document: action 'new' (sheet 'A4' upright or 'A3'..'A0', part: the saved model its views show, default the current part), 'open' (path .slddrw), 'save' (path .slddrw), 'export' (path: PDF, DXF, DWG, PNG/JPG/TIF of the sheet) or 'close' (without saving).
| Parameter | Type | Required | Notes |
|---|---|---|---|
| action | string | yes | — |
| path | string | no | — |
| sheet | string | no | — |
| part | string | no | — |
Fill the title block through the custom properties its fields show.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| properties | object | yes | — |
Add a view. kind:
| Parameter | Type | Required | Notes |
|---|---|---|---|
| kind | string | no | — |
| orientation | string | no | — |
| parent | string | no | — |
| side | string | no | — |
| through | array | no | — |
| normal | string | no | — |
| label | string | no | — |
| flip | boolean | no | — |
| center | array | no | — |
| radius_mm | number | no | — |
| at | array | no | — |
| beside | string | no | — |
| gap_mm | number | no | — |
| scale | string | no | — |
| name | string | no | — |
| part | string | no | — |
Move a view (its geometry centred on at=[x, y], or beside='<view>' on side, gap_mm apart; align 'center' or 'start'), change it (scale '1:2' or 'sheet'; display 'hidden_removed', 'hidden_visible', 'wireframe', 'shaded', 'shaded_edges'; tangent_edges; new_name), or delete=True it.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| name | string | yes | — |
| at | array | no | — |
| beside | string | no | — |
| side | string | no | — |
| gap_mm | number | no | — |
| align | string | no | — |
| scale | string | no | — |
| display | string | no | — |
| tangent_edges | boolean | no | — |
| new_name | string | no | — |
| delete | boolean | no | — |
The sheet's frame and title block, and each view (or one): name, type, scale, outline and geometry box (sheet mm), the model-to-sheet mapping (a model point p lands at origin + p.x * x + p.y * y + p.z * z), and its annotations: id, type, shown text, value, box.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| view | string | no | — |
Bring in what the model already knows. kinds: 'model' (its dimensions, each once), 'callouts' (one counted hole callout per set of identical Hole Wizard holes, '4X ...'), 'hole_locations' (their centres dimensioned from the left and bottom edges), 'center_marks' (centre marks and lines).
| Parameter | Type | Required | Notes |
|---|---|---|---|
| view | string | no | — |
| kinds | array | no | — |
Dimension in a view between references, or the size of one.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| view | string | yes | — |
| ref | string/array | yes | — |
| to | string/array | no | — |
| style | string | no | — |
| direction | string | no | — |
| side | string | no | — |
| offset_mm | number | no | — |
A symbol on an edge of a view, its leader attached mid-edge. type:
| Parameter | Type | Required | Notes |
|---|---|---|---|
| type | string | yes | — |
| view | string | yes | — |
| ref | string/array | yes | — |
| at | array | no | — |
| count | boolean | no | — |
| roughness | string | no | — |
| process | string | no | — |
| label | string | no | — |
| symbol | string | no | — |
| tolerance | string | no | — |
| datums | array | no | — |
| diameter | boolean | no | — |
| material_condition | string | no | — |
A note on the sheet; at=[x, y] its top-left corner (sheet mm), by default above the title block. Lines: '\ '.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| text | string | yes | — |
| at | array | no | — |
| height_mm | number | no | — |
A table on the sheet: rows [[cell, ...], ...] (title=True merges the first row), or gear={...} for a computed gear data table: kind 'spur' (diameters, span over k teeth, centre distance) or 'bevel' (straight: cone angles, cone distance, chordal thickness and height, crown to apex), teeth, module,…
| Parameter | Type | Required | Notes |
|---|---|---|---|
| rows | array | no | — |
| gear | object | no | — |
| at | array | no | — |
| title | boolean | no | — |
| text_height_mm | number | no | — |
| column_widths_mm | array | no | — |
Change an annotation by id ('RD3@Drawing View1'), or delete=True it.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| annotation_id | string | yes | — |
| prefix | string | no | — |
| suffix | string | no | — |
| precision | integer | no | — |
| tolerance | array | no | — |
| fit | string | no | — |
| text | string | no | — |
| at | array | no | — |
| diametric | boolean | no | — |
| delete | boolean | no | — |
Lay all views out again: the main view top left, its projected and section views beside it, the rest in the room left, with room for dimensions, at the largest standard scale that fits (or scale).
| Parameter | Type | Required | Notes |
|---|---|---|---|
| scale | string | no | — |
| main | string | no | — |
| arrange_dimensions | boolean | no | — |
Problems on the sheet, to fix before sending the drawing out.
Takes no parameters.
Picture (PNG/JPG) of the sheet, or of the region zoom_mm = [[x1, y1], [x2, y2]] (sheet mm), to look at it.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| path | string | yes | — |
| zoom_mm | array | no | — |
Close one open document by its title (list_documents): a part, assembly or drawing.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| title | string | no | — |
| save | boolean | no | — |
Save the current part (.sldprt) or assembly (.sldasm) to path, or over its own file without one.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| path | string | no | — |
Open a .sldprt or .sldasm, or import a STEP/IGES/Parasolid file; it becomes the current document.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| path | string | yes | — |
| kind | string | no | — |
Insert a .sldprt, or a .sldasm as a sub-assembly, with its ORIGIN at (x, y, z) mm.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| path | string | yes | — |
| x_mm | number | no | — |
| y_mm | number | no | — |
| z_mm | number | no | — |
| fixed | boolean | no | — |
List the assembly's components (name, path, fixed, position, rotation, bounding box) and mates.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| name | string | no | — |
| mates | boolean | no | — |
| brief | boolean | no | — |
Move/rotate a component: its origin to (x, y, z) mm, rotated rx/ry/rz degrees.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| name | string | yes | — |
| x_mm | number | yes | — |
| y_mm | number | yes | — |
| z_mm | number | yes | — |
| rx_deg | number | no | — |
| ry_deg | number | no | — |
| rz_deg | number | no | — |
Mate a face of one component to a face of another, or add several mates in one call.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| comp_a | string | no | — |
| face_a | string | no | — |
| comp_b | string | no | — |
| face_b | string | no | — |
| mate_type | string | no | — |
| distance_mm | number | no | — |
| angle_deg | number | no | — |
| flip | boolean | no | — |
| mates | array | no | — |
| stop_on_error | boolean | no | — |
Report component pairs whose solids overlap, with the volume in mm^3.
Takes no parameters.
The smallest distance (mm) from a component to another one, a point or an axis.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| component_a | string | yes | — |
| component_b | string | no | — |
| point_mm | array | no | — |
| axis_mm | array | no | — |
Step a joint through its range and check the assembly at every step.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| dimension_name | string | yes | — |
| values | array | yes | — |
| distances | array | no | — |
Outline what a component covers in a plane while a joint moves, to keep clear of it or cut it away.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| component | string | yes | — |
| dimension | string | yes | — |
| values | array | yes | — |
| heights_mm | array | yes | — |
| axis | string | no | — |
| margin_mm | number | no | — |
| tolerance_mm | number | no | — |
| frame | string | no | — |
No parameter schema on file.
No parameter schema on file.
No parameter schema on file.
No parameter schema on file.
No parameter schema on file.
No parameter schema on file.
No parameter schema on file.
No parameter schema on file.
No parameter schema on file.
No parameter schema on file.
Free
$0 forever
- Every tool, no call limit
- No card, and mcprush charges nothing for it
- Source published under MIT
- Runs on your machine — nothing of it reaches our gateway
- Nothing to cap, because mcprush bills nothing
What counts against your monthly calls
| Tool | Unit | Calls used | Out of the allowance |
|---|
Nothing here is billable: mcprush charges nothing to install SolidWorks or to call it, at any volume.
Call allowance · this installenforced at the gateway
Monthly allowance, in calls
—
—
Alert at 80% · then the tool returns a normal MCP error
Used this month: —
ATrust score 94 / 100
Release 0.2.0 · scanned 30 Oct 2026
Two independent axes, because powerful and malicious are different questions. The grade is threat only. The capability level is blast radius, and it is never a penalty on the grade — it is priced as one subtract-only term in the score, where you can see it.
Threat score100
Client score94
Findings1 threat · 5 capability
Capabilityhigh
Coveragesource
Verificationsource
Surface digestf3738f0fb173806d11f032a28d8fe879d2e62c67e801eec64c78f31fd7a7bf61
Score vectorthreat 100 → client 94
| Term | Level | What it prices | Points |
|---|---|---|---|
| capability-exposure | high | capability blast radius (high) — client exposure if the model is manipulated | −6 |
| verification-discount | source | publisher verification (provenance) — cryptographic build provenance ties the artifact to its source | −0 |
| coverage-honesty | source | inspection depth (source) — how much of the target the scan could see | −0 |
score = clamp(round(threatScore − E_cap − E_ver − E_cov), 0, 100). No model, no opinion, no network call at scoring time: the same methodology version against the same bytes always produces this number, and every line above is a field of the report rather than a summary of it.
What the scan could actually read
A grade is only as meaningful as its coverage, so the scanner publishes its own depth before it publishes its result.
Tool surfaceread
Implementation sourceread
Package metadataread
Live transportnot available
Tools were statically extracted from the published source (101 recovered), not enumerated from a running server. Tool-poisoning, Unicode-smuggling, capability and toxic-flow analysis ran on this inferred surface, but a mis-parsed registration could be missed or mis-attributed, so tool-derived findings are capped below “confirmed”. To grade the real runtime surface, scan the running server: --command "npx -y <package>".
Capability — what it could do if the model were manipulated
Tags derived from each tool’s schema and the implementation, not from what the tool calls itself. high is the level these add up to.
| Tool | Capability tags | Why the tag was assigned |
|---|---|---|
| get_status | no tags | |
| new_document | no tags | |
| add_box | no tags | |
| add_extruded_profile | no tags | |
| add_disc | no tags | |
| add_cylinder | no tags | |
| add_cone | no tags | |
| add_revolved_profile | no tags | |
| add_swept_pipe | no tags | |
| add_swept_profile | no tags | |
| add_loft | no tags | |
| cut_profile | no tags | |
| add_plane | no tags | |
| list_bodies | no tags | |
| combine_bodies | no tags | |
| split_body | no tags | |
| add_thread | no tags | |
| add_rib | no tags | |
| add_hole | no tags | |
| add_boss_on_face | no tags | |
| add_text_on_face | no tags | |
| cut_offset_pocket | no tags | |
| cut_slot | no tags | |
| add_extruded_slot | no tags | |
| extrude_sketch | no tags | |
| add_sketch | no tags | |
| cut_sketch | no tags | |
| add_fillet | no tags | |
| add_full_round | no tags | |
| add_chamfer | no tags | |
| add_linear_pattern | no tags | |
| add_circular_pattern | no tags | |
| add_axis | no tags | |
| run_script | code-exec | code-exec: keyword "run_script" in tool name |
| add_mirror | no tags | |
| add_shell | code-exec | code-exec: keyword "shell" in tool name |
| add_base_flange | no tags | |
| add_edge_flange | no tags | |
| flat_pattern | no tags | |
| add_closed_corner | no tags | |
| add_weld_bead | no tags | |
| add_structural_member | no tags | |
| add_end_cap | no tags | |
| add_gusset | no tags | |
| cut_list | no tags | |
| set_dimension | no tags | |
| slice_mesh | no tags | |
| compare_with_mesh | no tags | |
| list_dimensions | no tags | |
| read_sketch | no tags | |
| list_features | no tags | |
| delete_feature | no tags | |
| suppress_feature | no tags | |
| reorder_feature | no tags | |
| set_appearance | no tags | |
| set_material | no tags | |
| set_equation | no tags | |
| list_equations | no tags | |
| delete_equation | no tags | |
| list_documents | no tags | |
| activate_document | no tags | |
| delete_mate | no tags | |
| suppress_mate | no tags | |
| delete_component | no tags | |
| replace_component | no tags | |
| rebuild | no tags | |
| get_mass_properties | no tags | |
| get_bounding_box | no tags | |
| list_faces | no tags | |
| list_edges | no tags | |
| check_printability | no tags | |
| read_model | no tags | |
| export | no tags | |
| screenshot | no tags | |
| make_drawing | no tags | |
| build_drawing | no tags | |
| drawing_file | no tags | |
| set_drawing_properties | no tags | |
| add_view | no tags | |
| edit_view | no tags | |
| list_views | no tags | |
| import_dimensions | no tags | |
| add_dimension | no tags | |
| add_symbol | no tags | |
| add_note | no tags | |
| add_table | no tags | |
| edit_annotation | no tags | |
| auto_layout | no tags | |
| check_drawing | no tags | |
| render_drawing | no tags | |
| close_document | no tags | |
| save_document | no tags | |
| open_document | no tags | |
| insert_component | no tags | |
| list_components | no tags | |
| set_component_transform | no tags | |
| add_mate | no tags | |
| check_interference | no tags | |
| measure_distance | no tags | |
| check_motion | no tags | |
| swept_region | no tags |
Toxic-flow graph
The lethal trifecta, checked as a graph rather than as a checklist: untrusted input, a sensitive source and an external sink have to meet before there is a path worth worrying about.
The public result for this release does not print the flow graph, so there is nothing to show here. That is not the same as "no paths were found": what the scan did read is above, under coverage.
Supply chain and provenance
Integrityfirst-seen
Surface digestf3738f0fb173806d
Scanned2026-10-30
This is the first scan of this surface here, so there is nothing yet to compare it against.
Every result on this tab comes from one deterministic pass over the published package — offline, rule by rule, and auditable line by line above. Same methodology version, same bytes, same score.
Release history
Always latest — the install command names no version, so it installs the newest release when it runs; the current release on file is 0.2.0. Pin a release below and the command asks for exactly that one.
0.2.0
30 Oct 2026
latestNo release note was published with this version.
0.1.0
undated
- The version this listing was on when mcprush began following its releases. The registry was not asked when it shipped, so this row carries no date.
—
no reviews yet
Who can review
One review per account, from a signed-in account that does not publish this listing. Nothing else is asked — you can say what you think before you install it. Publishers can reply once per review, and a review can be edited or deleted by whoever wrote it.
Sign in to write one
Any signed-in account that does not publish SolidWorks can review it, once — before installing it or after. A review from an account that has installed it is marked as one.
No reviews yet
Nobody has reviewed this listing. The rating on the card is the mean of the reviews written here and nothing else, so there is no rating until somebody writes the first — which takes a signed-in account that does not publish it, and nothing else.