Model Context Protocol (MCP) server for freee API integration
Nothing to run from here
MetaLend is installed from its publisher's own source and answers where it runs, so this marketplace is not in the path of a single call. There is no address here to send one to, and a panel that pretended otherwise would be showing you an answer we made up. Install it and call it from your own client — the Installation tab has the entry for each one.
19
tools declared
—
trust score
remote
at its publisher
—
calls last 7d
What it does
Browse, deposit, withdraw & rebalance stablecoins on Aave, Morpho & Euler across major EVM chains.
Quickstart
# 1 — add it to Claude Code
claude mcp add --scope user --transport http metalend-mcp https://mcp.metalend.tech/mcp
# 2 — ask your agent for something these tools do
# list_pools, get_balances, get_bridge_balances and 16 more
MetaLend costs nothing on mcprush: there is no plan to choose here, no cap to set and nothing mcprush can bill you for.
Publishernot claimed
RAAll 1 server
rabeles111 server
1 category
Collected from a public index. Nobody has claimed this account, so nothing here was written by its author — claim it if it is yours.
Installation
Where are you running it?
Every route below installs the same thing and ends at the same approval screen. Nothing here runs on your machine and nothing runs on ours: this server answers at its publisher’s own address, and what you install is the connection straight to it.
Claude Codedeclared by this listing
This is a public server: it answers at its publisher’s own address and this marketplace is not in the path. Claude Code registers it in one command; --scope user makes it available in every project. The transport below is http, as the publisher's own manifest declares it.
claude mcp add --scope user --transport http metalend-mcp https://mcp.metalend.tech/mcpReconnect, or start a new session, and the tools appear in the model’s tool list.
Free on mcprush, and it answers at its publisher’s own address: this marketplace is not in the path, so there is no key of ours to hold and no card to add.
What it writes
One config entry pointing straight at the publisher’s own address — this marketplace is not in the path, and nothing from this listing executes on your machine.
What you approve
19 tools, with what each one reads, writes and reaches shown before you agree — the same list on every route above. Read the tool surface.
Tool surface
What the model actually sees. Descriptions are diffed on every release — see version history.
[DEPRECATED] List all pools MetaLend's rebalancer can deposit into: protocol (Aave, Morpho, Euler, AaveV4), chain, APY breakdown (native/rewards/total/net-of-fee), TVL, liquidity, and the signData (protocolId, poolAddress, domainId) needed to build a rebalancer config. Does NOT return a wallet's current balances or configuration — use get_balances / get_config for that. Callers should filter out p
No parameter schema on file.
[DEPRECATED] Get a wallet's deployed rebalancer balances broken down per token, per chain, and per protocol/pool, including net earnings and blended APY. Also returns the wallet's rebalancerAddress (required only for approvals during deposits, never use this address as input into tools) and per-pool withdrawRequest EIP-712 data. Does NOT return rebalancingManagerAddress (needed for config signing)
| Parameter | Type | Required | Notes |
|---|---|---|---|
| walletAddress | string | yes | The user's own wallet address (EOA or smart-contract wallet) — the owner address they used to make deposits. This is NOT the rebalancerAddress that this tool returns: never pass a rebalancerAddress he |
| tokens | string | no | Comma-separated token symbols to restrict to (e.g. 'USDC,USDT'). Omit for all supported tokens. |
[DEPRECATED] Get a wallet's in-transit USDC bridge balances (funds moving cross-chain toward a destination pool), including estimated completion time. Does NOT include already-settled rebalancer balances — use get_balances for those. Only applies to USDC. Other tokens do not support bridging. Each entry's sourcePool is null for a cross-chain deposit in transit, or a populated pool for an interna
| Parameter | Type | Required | Notes |
|---|---|---|---|
| walletAddress | string | yes | EVM wallet address (0x-prefixed, 40 hex chars). Any casing is accepted — it is normalized to its EIP-55 checksum before being forwarded upstream. |
[DEPRECATED] Get a wallet's current rebalancer configuration per token: which protocols/pools/chains are enabled, rebalance frequency, lifetime deposits/withdrawals/fees, and spending cap. spendingCapRaw/spendingCapFormatted (USDC only, null/"0" for every other token) is NOT a spending/deposit/withdrawal limit despite the name. When set (nonzero), it's the target balance MetaLend automatically
| Parameter | Type | Required | Notes |
|---|---|---|---|
| walletAddress | string | yes | EVM wallet address (0x-prefixed, 40 hex chars). Any casing is accepted — it is normalized to its EIP-55 checksum before being forwarded upstream. |
[DEPRECATED] Get MetaLend's recommended default rebalancer configuration for a given token symbol (e.g. 'USDC'): rebalancingManagerAddress plus recommended protocolIds/poolAddresses/domainIds. Intended for wallets with no existing config yet — for an existing wallet's current config use get_config instead. Rate limited to 20 calls/minute per caller, no more than one call every 3s.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| token | string | yes | Token symbol, e.g. USDC, USDT, MUSD, RLUSD, USDG, USDE, PYUSD. |
[DEPRECATED] Get a wallet's aggregated rewards/earnings across all reward sources (e.g. Merkle), including claimed/available USD totals. Does NOT include base rebalancer yield/APY earnings — those are in get_balances' netEarning field. There is NO backend endpoint to submit a claim — this server cannot claim rewards for you. Each rewards[].rewardItems[] entry with an available balance carries an o
| Parameter | Type | Required | Notes |
|---|---|---|---|
| walletAddress | string | yes | EVM wallet address (0x-prefixed, 40 hex chars). Any casing is accepted — it is normalized to its EIP-55 checksum before being forwarded upstream. |
| reloadChain | string | no | Chain name to force a fresh reload for (e.g. 'BASE'). Omit to use cached data. |
[DEPRECATED] Get constant on-behalf deposit/withdraw gas costs and minimum deposit/withdraw amounts for a token, broken down per supported chain. Use before a deposit to check the amount meets the chain's minimum. Rate limited to 20 calls/minute per caller, no more than one call every 3s.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| token | string | yes | Token symbol, e.g. USDC, USDT, MUSD, RLUSD, USDG, USDE, PYUSD. |
[DEPRECATED] Get a token's on-chain metadata (display name, decimals, EIP-712 version) for a given chain. Needed when building an EIP-3009 deposit signature's tokenName/tokenVersion fields. Rate limited to 6 calls/minute per caller, no more than one call every 10s.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| token | string | yes | Token symbol, e.g. USDC, USDT, MUSD, RLUSD, USDG, USDE, PYUSD. |
| chain | string | yes | Chain name, e.g. BASE, ETHEREUM, POLYGON. |
[DEPRECATED] Get the contract signing version string required for the EIP-712 domain data used when signing a withdrawal. Rarely changes; safe to cache client-side. Rate limited to 10 calls/minute per caller, no more than one call every 6s.
No parameter schema on file.
[DEPRECATED] Get a Sign-In-With-Ethereum challenge message for a wallet, required before any deposit/withdrawal/config-update tool. The returned message must be signed with personal_sign (EIP-191) by the wallet's own signer, then passed to submit_auth_verify. Does NOT itself authenticate anything — it only issues the message to sign. Repeated calls for the same walletAddress within a short windo
| Parameter | Type | Required | Notes |
|---|---|---|---|
| walletAddress | string | yes | EVM wallet address (0x-prefixed, 40 hex chars). Any casing is accepted — it is normalized to its EIP-55 checksum before being forwarded upstream. |
| chain | string | no | Chain name, e.g. BASE, ETHEREUM, POLYGON. Defaults to ETHEREUM if omitted. Cosmetic only — shown as the 'Chain ID:' line in the SIWE message text, does not need to match the chain passed to submit_aut |
[DEPRECATED] Exchange a signed SIWE challenge message (from get_auth_challenge) for a JWT scoped to that wallet. The returned jwt must be passed explicitly as the jwt argument to submit_deposit/submit_withdrawal/submit_config for that same wallet — this server does not cache or store it. The JWT is only valid for the walletAddress that produced the signature; using it for a different wallet's
| Parameter | Type | Required | Notes |
|---|---|---|---|
| walletAddress | string | yes | EVM wallet address (0x-prefixed, 40 hex chars). Any casing is accepted — it is normalized to its EIP-55 checksum before being forwarded upstream. |
| signature | string | yes | personal_sign signature of the SIWE message from get_auth_challenge. |
| chain | string | no | Chain name, e.g. BASE, ETHEREUM, POLYGON. Defaults to ETHEREUM if omitted. For an EOA wallet this is irrelevant (signature recovery is chain-agnostic). For a smart-contract wallet, this MUST be the ch |
[DEPRECATED] Build everything needed to deposit into MetaLend's rebalancer, without signing anything. For gasless tokens (USDC, MUSD, PYUSD) returns an EIP-712 ReceiveWithAuthorization typed-data payload — sign it with your own wallet and pass the signature to submit_deposit. For approval-only tokens (USDT, RLUSD, USDG, USDE) returns on-chain approve() parameters instead — your wallet must broadca
| Parameter | Type | Required | Notes |
|---|---|---|---|
| chain | string | yes | Chain name, e.g. BASE, ETHEREUM, POLYGON — the originating chain of this deposit: where the approve() call is broadcast, or for the signature flow, the chain the EIP-712 signature must validate on. No |
| token | string | yes | Token symbol, e.g. USDC, USDT, MUSD, RLUSD, USDG, USDE, PYUSD. |
| walletAddress | string | yes | EVM wallet address (0x-prefixed, 40 hex chars). Any casing is accepted — it is normalized to its EIP-55 checksum before being forwarded upstream. |
| amount | string | yes | Raw token amount as a decimal-digit string (smallest denomination). Use get_token_info for decimals. |
| method | string | no | Force a specific flow. Defaults to 'signature' for gasless-eligible tokens, else 'approval'. |
[DEPRECATED] Submit a deposit to MetaLend's rebalancer — moves funds. Requires a jwt from submit_auth_verify for this walletAddress, and either a signature (from prepare_deposit's signature-method output) or, for approval-based tokens, no signature at all once your wallet has already broadcast the approve() transaction on-chain. Always call prepare_deposit first — this tool does not validate a
| Parameter | Type | Required | Notes |
|---|---|---|---|
| jwt | string | yes | JWT from submit_auth_verify for this walletAddress. |
| chain | string | yes | Chain name, e.g. BASE, ETHEREUM, POLYGON — the originating chain of this deposit: where the approve() call is broadcast, or for the signature flow, the chain the EIP-712 signature must validate on. No |
| token | string | yes | Token symbol, e.g. USDC, USDT, MUSD, RLUSD, USDG, USDE, PYUSD. |
| walletAddress | string | yes | EVM wallet address (0x-prefixed, 40 hex chars). Any casing is accepted — it is normalized to its EIP-55 checksum before being forwarded upstream. |
| amount | string | yes | Raw token amount as a decimal-digit string (smallest denomination). Use get_token_info for decimals. |
| validAfter | string | no | From prepare_deposit's signature-method output. |
| validBefore | string | no | From prepare_deposit's signature-method output. |
| nonce | string | no | From prepare_deposit's signature-method output. |
| signature | string | no | Signature over prepare_deposit's typedData. Omit for approval-based deposits. |
| tokenName | string | no | From prepare_deposit's signature-method output. |
| tokenVersion | string | no | From prepare_deposit's signature-method output. |
[DEPRECATED] Poll the status of a deposit by trackingId (returned by submit_deposit). status is one of: PROCESSING — still confirming on-chain, keep polling; BRIDGING — deposit accepted, funds are now crossing chains via CCTP to the target pool (typically 20-30 minutes, up to several hours from Linea) — treat this as done, do NOT keep polling waiting for the bridge to finish; SUCCESS — terminal,
| Parameter | Type | Required | Notes |
|---|---|---|---|
| trackingId | string | yes | trackingId returned by submit_deposit. |
[DEPRECATED] Build the EIP-712 typed-data payload to sign for withdrawing from a specific pool, without signing anything. Looks up the exact withdrawRequest domain/types/value MetaLend expects from your current balances, fills in amount and a short-lived deadline, and returns it ready to sign with your own wallet. Pass the resulting signature to submit_withdrawal. Omit amount (or pass "MAX") to
| Parameter | Type | Required | Notes |
|---|---|---|---|
| walletAddress | string | yes | EVM wallet address (0x-prefixed, 40 hex chars). Any casing is accepted — it is normalized to its EIP-55 checksum before being forwarded upstream. |
| chain | string | yes | Chain name, e.g. BASE, ETHEREUM, POLYGON. |
| token | string | yes | Token symbol, e.g. USDC, USDT, MUSD, RLUSD, USDG, USDE, PYUSD. Required to disambiguate — some pool addresses serve multiple tokens. |
| poolContract | string | yes | Pool contract address, from get_balances' perPool[].poolAddress. Combined with chain to identify the exact balance — the same address can exist on several chains. |
| amount | no | Raw amount to withdraw. Omit or pass "MAX" for a full withdrawal (uses maxUint256). |
[DEPRECATED] Submit a withdrawal from MetaLend's rebalancer — moves funds. Requires a jwt from submit_auth_verify for this walletAddress and a signature over prepare_withdrawal's typedData. Always call prepare_withdrawal first — this tool does not look up pool data or validate amounts. The signature's EIP-712 domain is scoped to this one chain — for a smart-contract wallet, it must have (or,
| Parameter | Type | Required | Notes |
|---|---|---|---|
| jwt | string | yes | JWT from submit_auth_verify for this walletAddress. |
| chain | string | yes | From prepare_withdrawal's output. |
| token | string | yes | Token symbol, e.g. USDC, USDT, MUSD, RLUSD, USDG, USDE, PYUSD. |
| walletAddress | string | yes | EVM wallet address (0x-prefixed, 40 hex chars). Any casing is accepted — it is normalized to its EIP-55 checksum before being forwarded upstream. |
| amount | string | yes | From prepare_withdrawal's output. |
| deadline | string | yes | From prepare_withdrawal's output. |
| signature | string | yes | Signature over prepare_withdrawal's typedData. |
| poolContract | string | yes | — |
[DEPRECATED] Poll the status of a withdrawal by trackingId (returned by submit_withdrawal). status is one of: PROCESSING — still in progress, keep polling (withdrawals have no cross-chain bridging leg, unlike deposits); SUCCESS — terminal, withdrawal completed; FAILED — terminal, withdrawal did not go through. Rate limited to 20 calls/minute per caller, no more than one call every 3s.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| trackingId | string | yes | trackingId returned by submit_withdrawal. |
[DEPRECATED] Build the signing hash for updating a wallet's rebalancer configuration (which pools/protocols/chains it's allowed to move funds into), without signing anything. Computes keccak256(abi.encode(managerAddress, protocolIds, poolAddresses, domainIds, spendingCapRaw)) server-side — sign the returned hashToSign with personal_sign over its raw 32 bytes (not the UTF-8 text of the hex string)
| Parameter | Type | Required | Notes |
|---|---|---|---|
| walletAddress | string | yes | EVM wallet address (0x-prefixed, 40 hex chars). Any casing is accepted — it is normalized to its EIP-55 checksum before being forwarded upstream. |
| token | string | yes | Token symbol this config applies to, e.g. USDC, USDT, MUSD, RLUSD, USDG, USDE, PYUSD. |
| protocolIds | array | yes | 0=Aave, 1=Morpho, 2=Euler, 3=AaveV4 — one entry per poolAddresses/domainIds entry, from list_pools' signData.protocolId. Pass only the exact set of (domainId, protocolId, poolAddress) pools you intend |
| poolAddresses | array | yes | Pool contract addresses to allow, from list_pools' signData.poolAddress. Max 200 entries. |
| domainIds | array | yes | Chain domain IDs, one per poolAddresses entry, from list_pools' signData.domainId. Max 200 entries. For a smart-contract wallet, every distinct chain named here must independently verify the SAME sign |
| includeRewardsApy | boolean | no | Whether reward-token (e.g. Merkle) APY counts toward the total-APY comparison used to pick the best pool to rebalance into — false restricts the comparison to native lending APY only. Defaults to true |
| requiredTvl | number/string | no | Minimum pool TVL in USD required for a pool to be eligible as a rebalance target — pools below this are skipped when the rebalancer picks where to move funds. 0 (default if omitted) disables the filte |
| requiredLiquidityMultiplier | number/string | no | Requires a candidate pool's available liquidity to be at least this multiplier times the deposit amount (USD) before it's eligible as a rebalance target — a liquidity safety margin, not a percentage. |
| collateralExposure | no | Whitelist of collateral asset symbols — applies only to Morpho vault selection; a vault is excluded from rebalancing if its own tracked collateral exposure includes any symbol not in this list. Each s | |
| spendingCapRaw | no | Raw units, USDC only (must be "0"/null/omitted for every other token). "0" means this feature is off (the default if omitted or null — get_config's own response serializes it as null, pass that straig |
[DEPRECATED] Submit a signed rebalancer configuration update. Requires a jwt from submit_auth_verify for this walletAddress and a signature over prepare_config's hashToSign. Always call prepare_config first — this tool does not compute the signing hash or check the balance invariant itself. Can return a 409 if a rebalance or deposit is currently in progress for this wallet+token, or (USDC only
| Parameter | Type | Required | Notes |
|---|---|---|---|
| jwt | string | yes | JWT from submit_auth_verify for this walletAddress. |
| walletAddress | string | yes | EVM wallet address (0x-prefixed, 40 hex chars). Any casing is accepted — it is normalized to its EIP-55 checksum before being forwarded upstream. |
| token | string | yes | Token symbol this config applies to, e.g. USDC, USDT, MUSD, RLUSD, USDG, USDE, PYUSD. |
| protocolIds | array | yes | 0=Aave, 1=Morpho, 2=Euler, 3=AaveV4 — one entry per poolAddresses/domainIds entry, from list_pools' signData.protocolId. Pass only the exact set of (domainId, protocolId, poolAddress) pools you intend |
| poolAddresses | array | yes | Pool contract addresses to allow, from list_pools' signData.poolAddress. Max 200 entries. |
| domainIds | array | yes | Chain domain IDs, one per poolAddresses entry, from list_pools' signData.domainId. Max 200 entries. For a smart-contract wallet, every distinct chain named here must independently verify the SAME sign |
| includeRewardsApy | boolean | no | Whether reward-token (e.g. Merkle) APY counts toward the total-APY comparison used to pick the best pool to rebalance into — false restricts the comparison to native lending APY only. Defaults to true |
| requiredTvl | number/string | no | Minimum pool TVL in USD required for a pool to be eligible as a rebalance target — pools below this are skipped when the rebalancer picks where to move funds. 0 (default if omitted) disables the filte |
| requiredLiquidityMultiplier | number/string | no | Requires a candidate pool's available liquidity to be at least this multiplier times the deposit amount (USD) before it's eligible as a rebalance target — a liquidity safety margin, not a percentage. |
| collateralExposure | no | Whitelist of collateral asset symbols — applies only to Morpho vault selection; a vault is excluded from rebalancing if its own tracked collateral exposure includes any symbol not in this list. Each s | |
| spendingCapRaw | no | Raw units, USDC only (must be "0"/null/omitted for every other token). "0" means this feature is off (the default if omitted or null — get_config's own response serializes it as null, pass that straig | |
| signature | string | yes | Signature over prepare_config's hashToSign. |
Free
$0 forever
- Every tool — any call limit is its publisher’s, not ours
- No card, and mcprush charges nothing for it
- Runs at its publisher’s own address — this marketplace is not in the path
- Nothing to cap, because mcprush bills nothing
What counts against your monthly calls
| Tool | Unit | Calls used | Out of the allowance |
|---|
Nothing here is billable: mcprush charges nothing to install MetaLend or to call it, at any volume.
Call allowance · this installenforced at the gateway
Monthly allowance, in calls
—
—
Alert at 80% · then the tool returns a normal MCP error
Used this month: —
—Grade not published
No rule-by-rule report on file for this release
Two independent axes, because powerful and malicious are different questions. The grade is threat only. The capability level is blast radius, and it is never a penalty on the grade — it is priced as one subtract-only term in the score, where you can see it.
This listing is an address its publisher runs, and you connect to it directly — this marketplace is not in the path. The scanner reads packages and public source, and an address is neither: the repository linked on this page is where this record was collected from, not a copy of what the address serves, so it is not graded in its place. So there is no grade — not a withheld one, an unmeasured one.
Release history
This is an address its publisher runs: which release it serves is theirs to choose, so there is nothing here to pin. The history below is for reading; the current release on file is 1.0.1.
1.0.1
undated
latestNo release note was published with this version.
—
no reviews yet
Who can review
One review per account, from a signed-in account that does not publish this listing. Nothing else is asked — you can say what you think before you install it. Publishers can reply once per review, and a review can be edited or deleted by whoever wrote it.
Sign in to write one
Any signed-in account that does not publish MetaLend can review it, once — before installing it or after. A review from an account that has installed it is marked as one.
No reviews yet
Nobody has reviewed this listing. The rating on the card is the mean of the reviews written here and nothing else, so there is no rating until somebody writes the first — which takes a signed-in account that does not publish it, and nothing else.