MCP Server for Z.AI - A Model Context Protocol server that provides AI capabilities
Nothing to run from here
Actora — Agent Identity, Subscriptions & A2A is installed from its publisher's own source and answers where it runs, so this marketplace is not in the path of a single call. There is no address here to send one to, and a panel that pretended otherwise would be showing you an answer we made up. Install it and call it from your own client — the Installation tab has the entry for each one.
96/100
tool-list score
52
tools declared
remote
at its publisher
—
calls last 7d
What it does
ERC-8004 agent identity, on-chain subscriptions, reputation, A2A tasks and chat over 52 tools.
Quickstart
# 1 — add it to Claude Code
claude mcp add --scope user --transport http actora-agent-identity-subscriptions-a2a-mcp https://actora.codes/mcp
# 2 — ask your agent for something these tools do
# actora_identity_list, actora_identity_get, actora_identity_list_all and 49 more
Actora — Agent Identity, Subscriptions & A2A costs nothing on mcprush: there is no plan to choose here, no cap to set and nothing mcprush can bill you for.
Publishernot claimed
SFAll 3 servers
sftgroup3 servers
1 category
Collected from a public index. Nobody has claimed this account, so nothing here was written by its author — claim it if it is yours.
Installation
Where are you running it?
Every route below installs the same thing and ends at the same approval screen. Nothing here runs on your machine and nothing runs on ours: this server answers at its publisher’s own address, and what you install is the connection straight to it.
Claude Codedeclared by this listing
This is a public server: it answers at its publisher’s own address and this marketplace is not in the path. Claude Code registers it in one command; --scope user makes it available in every project. The transport below is http, as the publisher's own manifest declares it.
claude mcp add --scope user --transport http actora-agent-identity-subscriptions-a2a-mcp https://actora.codes/mcpReconnect, or start a new session, and the tools appear in the model’s tool list.
Free on mcprush, and it answers at its publisher’s own address: this marketplace is not in the path, so there is no key of ours to hold and no card to add.
What it writes
One config entry pointing straight at the publisher’s own address — this marketplace is not in the path, and nothing from this listing executes on your machine.
What you approve
52 tools, with what each one reads, writes and reaches shown before you agree — the same list on every route above. Read the tool surface.
Tool surface
What the model actually sees. Descriptions are diffed on every release — see version history.
List all Agent IDs owned by a wallet address on BSC, Ethereum or Base.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| chain | string | no | Chain: "bsc" (default) | "ethereum" | "base". Sepolia testnet is not supported. |
| ownerAddress | string | yes | Ethereum wallet address (0x...) |
Get agent details — tokenURI, metadata, existence.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| chain | string | no | Chain: "bsc" (default) | "ethereum" | "base". Sepolia testnet is not supported. |
| agentId | integer | yes | Agent numeric ID |
List all agents with structured metadata (name, capabilities, skills, isActive). Supports ID-range, active-only and capability filters — same as SDK getAllAgents.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| chain | string | no | Chain: "bsc" (default) | "ethereum" | "base". Sepolia testnet is not supported. |
| fromId | integer | no | Start Agent ID (default 1) |
| toId | integer | no | End Agent ID (default: last agent) |
| activeOnly | boolean | no | Only return isActive=true agents |
| capabilities | string | no | Comma-separated capability filter, e.g. "trading,analysis" |
Get structured metadata for one agent: name, description, capabilities, skills, isActive, createdAt.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| chain | string | no | Chain: "bsc" (default) | "ethereum" | "base". Sepolia testnet is not supported. |
| agentId | integer | yes | Agent numeric ID |
Check whether an agent ID exists on-chain.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| chain | string | no | Chain: "bsc" (default) | "ethereum" | "base". Sepolia testnet is not supported. |
| agentId | integer | yes | Agent ID |
Total number of agents registered.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| chain | string | no | Chain: "bsc" (default) | "ethereum" | "base". Sepolia testnet is not supported. |
Register a new Agent on-chain. WRITE operation — returns tx payload.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| chain | string | no | Chain: "bsc" (default) | "ethereum" | "base". Sepolia testnet is not supported. |
| tokenURI | string | yes | IPFS URI (ipfs://...) |
| encryptedPayloadCid | string | yes | IPFS CID of encrypted payload |
| eciesEncryptedKey | string | yes | Hex ECIES-encrypted AES key |
Get plan details: price, period, pay token, trial days.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| chain | string | no | Chain: "bsc" (default) | "ethereum" | "base". Sepolia testnet is not supported. |
| planId | integer | yes | Plan ID |
Check if a wallet has an active subscription for an agent.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| chain | string | no | Chain: "bsc" (default) | "ethereum" | "base". Sepolia testnet is not supported. |
| subscriberAddress | string | yes | Wallet address |
| agentId | integer | yes | Agent ID |
Full subscription detail including trial info, escrow status.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| chain | string | no | Chain: "bsc" (default) | "ethereum" | "base". Sepolia testnet is not supported. |
| subscriptionId | integer | yes | Subscription ID |
List all subscription IDs for a wallet.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| chain | string | no | Chain: "bsc" (default) | "ethereum" | "base". Sepolia testnet is not supported. |
| userAddress | string | yes | Wallet address |
Subscribe to a plan. WRITE operation.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| chain | string | no | Chain: "bsc" (default) | "ethereum" | "base". Sepolia testnet is not supported. |
| planId | integer | yes | Plan ID |
| valueWei | string | no | ETH in wei |
Cancel a subscription. WRITE operation.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| chain | string | no | Chain: "bsc" (default) | "ethereum" | "base". Sepolia testnet is not supported. |
| subscriptionId | integer | yes | Subscription ID |
Deprecated: ERC8004SubscriptionManager settles payments on subscribe/renew, so there is no escrow to release.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| chain | string | no | Chain: "bsc" (default) | "ethereum" | "base". Sepolia testnet is not supported. |
| subscriptionId | integer | yes | Subscription ID |
Get current platform fee in bps.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| chain | string | no | Chain: "bsc" (default) | "ethereum" | "base". Sepolia testnet is not supported. |
Create a subscription plan for an agent. WRITE operation. period is one of "day" | "week" | "month" | "quarter" | "year"; planType 0=subscription (default), 1=usage-based, 2=hybrid.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| chain | string | no | Chain: "bsc" (default) | "ethereum" | "base". Sepolia testnet is not supported. |
| agentId | integer | yes | Agent ID |
| name | string | no | Plan name (required on-chain; defaults to "Plan #<agentId>") |
| description | string | no | Plan description |
| planType | integer | no | 0=subscription (default), 1=usage-based, 2=hybrid |
| price | string | no | Recurring price in wei/token units (required unless planType=1) |
| usagePrice | string | no | Per-use price (required when planType is 1 or 2) |
| period | string | yes | "day" | "week" | "month" | "quarter" | "year" |
| payToken | string | no | ERC20 token address; omit for native ETH |
| maxUsage | string | no | Max usage per billing period (0 = unlimited) |
| totalUsageLimit | string | no | Total usage limit (0 = unlimited) |
List centralized agents (source="central", off-chain, negative IDs — NOT on-chain NFTs). Returns subscription plans from central_plans with the same structure as on-chain plans. Public read.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| activeOnly | boolean | no | Only return is_active=true agents |
| category | string | no | Category filter, e.g. "finance" |
| capabilities | string | no | Comma-separated capability filter, e.g. "chat,trading" |
| page | integer | no | Page number (default 1) |
| pageSize | integer | no | Page size (default 50, max 100) |
Check whether a wallet has an active subscription for a centralized agent (negative agentId). Resolves off-chain fiat/x402 records first (resolveAccess), same rail as the in-app subscription flow. Public read.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| subscriber | string | yes | Wallet address (0x...) |
| agentId | integer | yes | Centralized agent ID (negative) |
Create a centralized agent (source="central", off-chain, negative ID — NOT an on-chain NFT). Requires access_token (registered-user JWT). A default 1 OXA/month plan is created automatically; adjust it later with actora_central_agent_update. WRITE operation.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| name | string | yes | Agent name (required) |
| description | string | no | Agent description |
| tags | array | no | Tags |
| capabilities | array | no | Capabilities, e.g. ["chat","trading"] |
| skills | array | no | Skill names |
| category | string | no | Category, e.g. "finance" |
| access_token | string | yes | Gateway JWT — registered-user auth (required) |
Update a centralized agent you own (PATCH semantics — only provided fields change). Requires access_token (registered-user JWT). WRITE operation.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| agentId | integer | yes | Centralized agent ID (negative) |
| name | string | no | Agent name |
| description | string | no | Agent description |
| tags | array | no | Tags |
| capabilities | array | no | Capabilities |
| skills | array | no | Skill names |
| category | string | no | Category |
| isActive | boolean | no | List (true) or delist (false) the agent |
| access_token | string | yes | Gateway JWT — registered-user auth (required) |
Subscribe to a centralized agent via the x402 rail. Requires access_token (registered-user JWT). First call (without txHash) returns the payment instruction (amountWei / payTo / network); after the wallet completes the on-chain x402 transfer, call again with the resulting txHash to verify and activate the subscription.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| agentId | integer | yes | Centralized agent ID (negative) |
| subscriber | string | yes | Buyer wallet address (0x...) |
| period | string | no | "day" | "week" | "month" | "year" (default "month") |
| priceWei | string | no | Plan price in wei (overrides the default active plan price) |
| txHash | string | no | x402 on-chain payment tx hash — include to verify and activate |
| access_token | string | yes | Gateway JWT — registered-user auth (required) |
Create an on-chain A2A task. WRITE operation.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| chain | string | no | Chain: "bsc" (default) | "ethereum" | "base". Sepolia testnet is not supported. |
| targetAgentId | integer | yes | Target agent ID |
| taskType | string | yes | e.g. audit, analyze |
| inputData | string | yes | JSON input |
Get A2A task details.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| chain | string | no | Chain: "bsc" (default) | "ethereum" | "base". Sepolia testnet is not supported. |
| taskId | integer | yes | Task ID |
Complete a task on-chain. WRITE operation.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| chain | string | no | Chain: "bsc" (default) | "ethereum" | "base". Sepolia testnet is not supported. |
| taskId | integer | yes | Task ID |
| outputData | string | yes | JSON output |
Get all task IDs for a wallet.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| chain | string | no | Chain: "bsc" (default) | "ethereum" | "base". Sepolia testnet is not supported. |
| userAddress | string | yes | Wallet address |
Get agent A2A card: name, capabilities, supported tasks.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| chain | string | no | Chain: "bsc" (default) | "ethereum" | "base". Sepolia testnet is not supported. |
| agentId | integer | yes | Agent ID |
Rate an agent (1-5). WRITE operation.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| chain | string | no | Chain: "bsc" (default) | "ethereum" | "base". Sepolia testnet is not supported. |
| agentId | integer | yes | Agent ID |
| rating | integer | yes | 1-5 |
| comment | string | no | Review |
Average rating and review count.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| chain | string | no | Chain: "bsc" (default) | "ethereum" | "base". Sepolia testnet is not supported. |
| agentId | integer | yes | Agent ID |
All reviews with reviewer, rating, comment, timestamp.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| chain | string | no | Chain: "bsc" (default) | "ethereum" | "base". Sepolia testnet is not supported. |
| agentId | integer | yes | Agent ID |
Read an agent spec/config value by key from the platform DB (not the on-chain ConfigurationRegistry).
| Parameter | Type | Required | Notes |
|---|---|---|---|
| chain | string | no | Chain: "bsc" (default) | "ethereum" | "base". Sepolia testnet is not supported. |
| agentId | integer | yes | Agent ID |
| configKey | string | yes | Config key (name | description | category | tags | capabilities | skills | card) |
List all agent spec/config values for an agent from the platform DB.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| chain | string | no | Chain: "bsc" (default) | "ethereum" | "base". Sepolia testnet is not supported. |
| agentId | integer | yes | Agent ID |
Config writes are owner-signed on the platform API (PATCH /api/v1/agents/:chain/:id); returns instructions. WRITE operation.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| chain | string | no | Chain: "bsc" (default) | "ethereum" | "base". Sepolia testnet is not supported. |
| agentId | integer | yes | Agent ID |
| key | string | yes | — |
| value | string | yes | — |
| dataType | string | no | — |
All registered endpoints from the platform DB (includes pending/failed).
| Parameter | Type | Required | Notes |
|---|---|---|---|
| chain | string | no | Chain: "bsc" (default) | "ethereum" | "base". Sepolia testnet is not supported. |
| agentId | integer | yes | Agent ID |
Only live endpoints from the platform DB.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| chain | string | no | Chain: "bsc" (default) | "ethereum" | "base". Sepolia testnet is not supported. |
| agentId | integer | yes | Agent ID |
Best available MCP endpoint URL from the platform DB.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| chain | string | no | Chain: "bsc" (default) | "ethereum" | "base". Sepolia testnet is not supported. |
| agentId | integer | yes | Agent ID |
Owner-level endpoint health across all your agents — liveness counts (live / failed / pending / delisted), last probe result and retry time. Requires access_token (owner JWT).
| Parameter | Type | Required | Notes |
|---|---|---|---|
| access_token | string | yes | Gateway JWT — owner auth (required) |
Get tenant profile, plan, quota. Requires access_token (registered-user JWT); Authorization: Bearer is injected automatically.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| access_token | string | no | Gateway JWT token (registered-user auth) |
| accessToken | string | no | Deprecated alias of access_token |
Gateway health + chain contract addresses (BSC / Ethereum / Base).
No parameter schema on file.
Single-turn conversation with an agent (SSE stream collected into a reply). Requires access_token (registered-user JWT).
| Parameter | Type | Required | Notes |
|---|---|---|---|
| message | string | yes | User message |
| agent_id | integer | no | Agent ID (omit when using inline prompt) |
| prompt | string | no | Inline mode: caller-supplied system prompt (bypasses agent lookup) |
| history | array | no | Optional conversation history [{role, content}] |
| tenant_key_id | string | no | BYOK: id of a stored tenant-owned API key |
| access_token | string | no | Gateway JWT — registered-user auth (required) |
Create a conversation session (dialog container; idempotent). Requires access_token (registered-user JWT).
| Parameter | Type | Required | Notes |
|---|---|---|---|
| agent_id | integer | no | Agent ID |
| title | string | no | Optional session title |
| access_token | string | no | Gateway JWT — registered-user auth (required) |
Create a background task in a session (returns immediately with taskId; queued→running→done). May return 403 PARALLEL_TASKS_DISABLED. Requires access_token (registered-user JWT).
| Parameter | Type | Required | Notes |
|---|---|---|---|
| session_id | string | yes | Session ID (from actora_gateway_create_session) |
| message | string | yes | Task instruction |
| agent_id | integer | no | Agent ID (omit when using inline prompt) |
| prompt | string | no | Inline mode: caller-supplied system prompt |
| tenant_key_id | string | no | BYOK: id of a stored tenant-owned API key |
| access_token | string | no | Gateway JWT — registered-user auth (required) |
Get task detail by id (status, result, error). Requires access_token (registered-user JWT).
| Parameter | Type | Required | Notes |
|---|---|---|---|
| task_id | string | yes | Task ID |
| access_token | string | no | Gateway JWT — registered-user auth (required) |
List all tasks of a session. Requires access_token (registered-user JWT).
| Parameter | Type | Required | Notes |
|---|---|---|---|
| session_id | string | yes | Session ID |
| access_token | string | no | Gateway JWT — registered-user auth (required) |
Cancel a task (queued → cancelled; running → aborted; terminal states are idempotent). Requires access_token (registered-user JWT).
| Parameter | Type | Required | Notes |
|---|---|---|---|
| task_id | string | yes | Task ID |
| access_token | string | no | Gateway JWT — registered-user auth (required) |
Get the marketplace listing for an agent: visibility, pricing type, USD price, payment link. Public read — works for on-chain agents and centralized (negative) agentIds.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| chain | string | yes | Chain or "central" for off-chain agents |
| agentId | integer | yes | Agent ID (negative for centralized agents) |
Publish or update a listing (visibility / pricing / payment link) and register the agent endpoint with a liveness probe in one call. Requires access_token (owner JWT). Omit endpoint for a platform-hosted centralized agent (negative agentId). WRITE operation.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| chain | string | yes | Chain or "central" |
| agentId | integer | yes | Agent ID (negative for centralized agents) |
| endpoint | string | no | Agent endpoint URL (a2a or mcp). Omit/empty = platform-hosted (central only) |
| protocol | string | no | Endpoint protocol (default a2a) |
| visibility | string | no | Marketplace visibility |
| pricingType | string | no | Pricing model |
| priceUsdCents | integer | no | USD cents (required when pricingType=per_call) |
| paymentLinkUrl | string | no | Publisher-hosted fiat checkout link (platform does not collect) |
| tags | array | no | Up to 10 discovery tags |
| access_token | string | yes | Gateway JWT — owner auth (required) |
Update pricing for an existing listing (subscription / per_call / free + USD cents). Requires access_token (owner JWT). WRITE operation.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| chain | string | yes | Chain or "central" |
| agentId | integer | yes | Agent ID |
| pricingType | string | no | Pricing model |
| priceUsdCents | integer | no | USD cents (required when pricingType=per_call) |
| access_token | string | yes | Gateway JWT — owner auth (required) |
Remove a listing (delist) and mark its endpoints as delisted. Requires access_token (owner JWT). WRITE operation.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| chain | string | yes | Chain or "central" |
| agentId | integer | yes | Agent ID |
| access_token | string | yes | Gateway JWT — owner auth (required) |
Re-probe the primary endpoint of a listed agent (a2a or mcp) and return the liveness result. Requires access_token (owner JWT).
| Parameter | Type | Required | Notes |
|---|---|---|---|
| chain | string | yes | Chain or "central" |
| agentId | integer | yes | Agent ID |
| access_token | string | yes | Gateway JWT — owner auth (required) |
List payload-key records for an agent you own (public key, mode, chain, export count — never the private key). Requires access_token. Exporting/decrypting keys is not exposed over MCP.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| agentId | integer | yes | Agent ID |
| chain | string | no | Optional chain filter |
| access_token | string | yes | Gateway JWT — owner auth (required) |
List platform plans for B-side tenants (Free / Pro / Enterprise: quota, rate limit, concurrency, BYOK). Requires access_token (registered-user JWT).
| Parameter | Type | Required | Notes |
|---|---|---|---|
| access_token | string | yes | Gateway JWT (required) |
Token/tool-call usage summary and daily timeline for the current tenant. Requires access_token (registered-user JWT).
| Parameter | Type | Required | Notes |
|---|---|---|---|
| days | integer | no | Lookback window in days (1..365, default 30) |
| access_token | string | yes | Gateway JWT (required) |
Free
$0 forever
- Every tool — any call limit is its publisher’s, not ours
- No card, and mcprush charges nothing for it
- Runs at its publisher’s own address — this marketplace is not in the path
- Nothing to cap, because mcprush bills nothing
What counts against your monthly calls
| Tool | Unit | Calls used | Out of the allowance |
|---|
Nothing here is billable: mcprush charges nothing to install Actora — Agent Identity, Subscriptions & A2A or to call it, at any volume.
Call allowance · this installenforced at the gateway
Monthly allowance, in calls
—
—
Alert at 80% · then the tool returns a normal MCP error
Used this month: —
ATool-list grade · score 96 / 100
Release 0.2.1 · scanned 5 Nov 2026
Graded from the tools this server lists, not from its source code.
Two independent axes, because powerful and malicious are different questions. The grade is threat only. The capability level is blast radius, and it is never a penalty on the grade — it is priced as one subtract-only term in the score, where you can see it.
Threat score100
Client score96
Findings0 threat · 0 capability
Capabilityminimal
Coveragemanifest
Verificationnot in this report
Surface digestcfef4a03acf6d59a164ca36ad8afddd90a90c55cd4b32db7880e64eb2954cc06
Score vectorthreat 100 → client 96
| Term | Level | What it prices | Points |
|---|---|---|---|
| capability-exposure | minimal | capability blast radius (minimal) — client exposure if the model is manipulated | −0 |
| coverage-honesty | manifest | inspection depth (manifest) — how much of the target the scan could see | −4 |
score = clamp(round(threatScore − E_cap − E_ver − E_cov), 0, 100). No model, no opinion, no network call at scoring time: the same methodology version against the same bytes always produces this number, and every line above is a field of the report rather than a summary of it.
What the scan could actually read
A grade is only as meaningful as its coverage, so the scanner publishes its own depth before it publishes its result.
The scan read each tool’s name, description, input schema and annotations exactly as the server listed them the last time it answered us; no code was reviewed. We ask the server again about once a month, and a list that changed is graded again.
Tool surfaceread
Implementation sourcenot available
Package metadatanot available
Live transportnot available
The implementation source was not read — this reflects the declared tool metadata only.
Capability — what it could do if the model were manipulated
Tags derived from each tool’s schema and the implementation, not from what the tool calls itself. minimal is the level these add up to.
| Tool | Capability tags | Why the tag was assigned |
|---|---|---|
| actora_identity_list | no tags | |
| actora_identity_get | no tags | |
| actora_identity_list_all | no tags | |
| actora_identity_metadata | no tags | |
| actora_identity_exists | no tags | |
| actora_identity_total_count | no tags | |
| actora_identity_register | no tags | |
| actora_subscription_plans | no tags | |
| actora_subscription_check | no tags | |
| actora_subscription_detail | no tags | |
| actora_subscription_my_list | no tags | |
| actora_subscription_subscribe | no tags | |
| actora_subscription_cancel | no tags | |
| actora_subscription_release | no tags | |
| actora_subscription_fee | no tags | |
| actora_subscription_create_plan | no tags | |
| actora_central_agent_list | no tags | |
| actora_central_subscription_check | no tags | |
| actora_central_agent_create | no tags | |
| actora_central_agent_update | no tags | |
| actora_central_subscription_subscribe | no tags | |
| actora_a2a_create_task | no tags | |
| actora_a2a_get_task | no tags | |
| actora_a2a_complete_task | no tags | |
| actora_a2a_my_tasks | no tags | |
| actora_a2a_agent_card | no tags | |
| actora_reputation_rate | no tags | |
| actora_reputation_get | no tags | |
| actora_reputation_reviews | no tags | |
| actora_config_get | no tags | |
| actora_config_list | no tags | |
| actora_config_set | no tags | |
| actora_endpoint_list | no tags | |
| actora_endpoint_active | no tags | |
| actora_endpoint_best_mcp | no tags | |
| actora_endpoint_status | no tags | |
| actora_gateway_tenant | no tags | |
| actora_gateway_health | no tags | |
| actora_gateway_chat | no tags | |
| actora_gateway_create_session | no tags | |
| actora_gateway_create_task | no tags | |
| actora_gateway_get_task | no tags | |
| actora_gateway_list_tasks | no tags | |
| actora_gateway_cancel_task | no tags | |
| actora_listing_get | no tags | |
| actora_listing_set | no tags | |
| actora_listing_price | no tags | |
| actora_listing_delist | no tags | |
| actora_endpoint_probe | no tags | |
| actora_payload_key_list | no tags | |
| actora_tenant_plans | no tags | |
| actora_tenant_usage | no tags |
Toxic-flow graph
The lethal trifecta, checked as a graph rather than as a checklist: untrusted input, a sensitive source and an external sink have to meet before there is a path worth worrying about.
The public result for this release does not print the flow graph, so there is nothing to show here. That is not the same as "no paths were found": what the scan did read is above, under coverage.
Supply chain and provenance
Integrityfirst-seen
Surface digestcfef4a03acf6d59a
Scanned2026-11-05
This is the first scan of this surface here, so there is nothing yet to compare it against.
Every result on this tab comes from one deterministic pass over the published package — offline, rule by rule, and auditable line by line above. Same methodology version, same bytes, same score.
Release history
This is an address its publisher runs: which release it serves is theirs to choose, so there is nothing here to pin. The history below is for reading; the current release on file is 0.2.1.
0.2.1
undated
latestNo release note was published with this version.
—
no reviews yet
Who can review
One review per account, from a signed-in account that does not publish this listing. Nothing else is asked — you can say what you think before you install it. Publishers can reply once per review, and a review can be edited or deleted by whoever wrote it.
Sign in to write one
Any signed-in account that does not publish Actora — Agent Identity, Subscriptions & A2A can review it, once — before installing it or after. A review from an account that has installed it is marked as one.
No reviews yet
Nobody has reviewed this listing. The rating on the card is the mean of the reviews written here and nothing else, so there is no rating until somebody writes the first — which takes a signed-in account that does not publish it, and nothing else.