Blender integration through the Model Context Protocol
Nothing to run from here
Shapesoda is installed from its publisher's own source and answers where it runs, so this marketplace is not in the path of a single call. There is no address here to send one to, and a panel that pretended otherwise would be showing you an answer we made up. Install it and call it from your own client — the Installation tab has the entry for each one.
5
tools declared
—
trust score
remote
at its publisher
—
calls last 7d
What it does
Vectorize images: PNG/JPG to SVG, PDF, EPS, DXF. Turns logos, icons and scans into clean vectors.
Quickstart
# 1 — add it to Claude Code
claude mcp add --scope user --transport http shapesoda-mcp https://shapesoda.com/mcp
# 2 — ask your agent for something these tools do
# create_upload, vectorize, open_editor and 2 more
Shapesoda costs nothing on mcprush: there is no plan to choose here, no cap to set and nothing mcprush can bill you for.
Publishernot claimed
SHAll 1 server
shapesoda1 server
1 category
Collected from a public index. Nobody has claimed this account, so nothing here was written by its author — claim it if it is yours.
Installation
Where are you running it?
Every route below installs the same thing and ends at the same approval screen. Nothing here runs on your machine and nothing runs on ours: this server answers at its publisher’s own address, and what you install is the connection straight to it.
Claude Codedeclared by this listing
This is a public server: it answers at its publisher’s own address and this marketplace is not in the path. Claude Code registers it in one command; --scope user makes it available in every project. The transport below is http, as the publisher's own manifest declares it.
claude mcp add --scope user --transport http shapesoda-mcp https://shapesoda.com/mcpReconnect, or start a new session, and the tools appear in the model’s tool list.
Free on mcprush, and it answers at its publisher’s own address: this marketplace is not in the path, so there is no key of ours to hold and no card to add.
What it writes
One config entry pointing straight at the publisher’s own address — this marketplace is not in the path, and nothing from this listing executes on your machine.
What you approve
5 tools, with what each one reads, writes and reaches shown before you agree — the same list on every route above. Read the tool surface.
Tool surface
What the model actually sees. Descriptions are diffed on every release — see version history.
Creates a one-time upload link for a local image file (valid 10 minutes). Upload the file with the returned curl command, then pass upload_id to vectorize. Only for agents whose terminal can reach shapesoda.com (Claude Code, Cursor and similar); in Claude.ai and other chat apps the sandbox cannot upload there, so call open_editor instead.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| filename | string | no | Optional file name, for reference only. |
Use this when the user wants to convert a raster image (logo, icon, illustration, scan, screenshot; PNG, JPEG, WebP, BMP, GIF, TIFF) into a vector: SVG, PDF, EPS, DXF or a re-rendered PNG. Pass the image in exactly one way: image (a file attached to the chat message, ChatGPT), upload_id (from create_upload) or image_base64 (≤2 MB, only exact file bytes you already have as text). If none of these i
| Parameter | Type | Required | Notes |
|---|---|---|---|
| image | object | no | Image file attached to the user's message in the chat (ChatGPT). |
| upload_id | string | no | ID returned by create_upload after the file was uploaded. |
| image_base64 | string | no | Exact PNG/JPEG/WebP/BMP/GIF/TIFF file bytes in base64 (≤2 MB), only when you already have them as text (e.g. from reading the file in a terminal). Never transcribe an image you only see in the convers |
| image_type | string | no | Kind of image: artwork with smooth (anti-aliased) edges, artwork with hard pixel edges, or photo. Default auto. |
| quality | string | no | Input quality: low for blurry/noisy/JPEG-heavy images. Default auto. |
| colors | no | Number of colors: 'auto', 'unlimited', or an integer 2–32 (max_colors goes up to 256). Default auto. | |
| detail | string | no | Output detail for photos. Default auto. |
| preset | string | no | Settings for the job: web (default), print (PDF, shapes cut out), cut (vinyl/stickers, 8 colors), laser (2-color outlines), embroidery (12 colors, no tiny shapes). |
| format | array | no | Output formats; several formats cost 1 credit together. Default: the preset's format (svg for web). |
| draw | string | no | fill: filled shapes; stroke: outline of every shape; stroke_edges: only the borders between shapes, each once (no double cuts). Default from the preset. |
| layers | string | no | Shapes stacked on top of each other, cut out of each other, or cut out and grouped by color. Default from the preset. |
| max_colors | integer | no | Maximum number of colors (2–256). Not combined with colors or palette. |
| palette | no | Fixed colors #rrggbb (2–256), as a list or a comma-separated string. Not combined with colors or max_colors. | |
| palette_tolerance | number | no | With palette: how far (CIE76 ΔE) an image color may be from a palette color to snap to it; farther colors keep their own value. |
| min_area | integer | no | Smallest shape kept, in px²; smaller specks are dropped. Overrides the preset. |
| max_pixels | integer | no | Downscale the input to at most this many pixels before tracing (faster, fewer nodes). |
| curve_tolerance | number | no | Curve fitting tolerance in source pixels (default ≈0.5): lower keeps more nodes. Also sets smoothness unless given. |
| smoothness | integer | no | Contour smoothing 1–10 (higher: smoother, fewer nodes). |
| corners | string | no | Keep corners sharp or round them. |
| denoise | integer | no | Noise reduction before tracing: 0 off … 3 strongest. |
Use this when the user wants to vectorize an image but you cannot pass the image to vectorize (no image, upload_id or exact base64 bytes available), including when the user attached the image in Claude.ai: opens the Shapesoda window, where the user picks the file, sees the vector result and adjusts it. Does not vectorize by itself and uses no credits. Do not use for generating new images.
No parameter schema on file.
Re-vectorizes a stored result (result_id and token from vectorize) with other settings, free for 24 hours after the first vectorization. Used by the Shapesoda window.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| result_id | string | yes | result_id from vectorize or revectorize. |
| token | string | yes | Result token (the token parameter of the result links). |
| image_type | string | no | Kind of image: artwork with smooth (anti-aliased) edges, artwork with hard pixel edges, or photo. Default auto. |
| quality | string | no | Input quality: low for blurry/noisy/JPEG-heavy images. Default auto. |
| colors | no | Number of colors: 'auto', 'unlimited', or an integer 2–32 (max_colors goes up to 256). Default auto. | |
| palette | no | Fixed colors #rrggbb (2–256), as a list or a comma-separated string. Not combined with colors or max_colors. | |
| smoothness | integer | no | Contour smoothing 1–10 (higher: smoother, fewer nodes). |
| transparency | string | no | Transparent areas: keep (stay transparent), white, or a background color #rrggbb. |
| corners | string | no | Keep corners sharp or round them. |
| min_area | integer | no | Smallest shape kept, in px²; smaller specks are dropped. Overrides the preset. |
Shows how many credits were used this month and how many remain.
No parameter schema on file.
Free
$0 forever
- Every tool — any call limit is its publisher’s, not ours
- No card, and mcprush charges nothing for it
- Runs at its publisher’s own address — this marketplace is not in the path
- Nothing to cap, because mcprush bills nothing
What counts against your monthly calls
| Tool | Unit | Calls used | Out of the allowance |
|---|
Nothing here is billable: mcprush charges nothing to install Shapesoda or to call it, at any volume.
Call allowance · this installenforced at the gateway
Monthly allowance, in calls
—
—
Alert at 80% · then the tool returns a normal MCP error
Used this month: —
—Grade not published
No rule-by-rule report on file for this release
Two independent axes, because powerful and malicious are different questions. The grade is threat only. The capability level is blast radius, and it is never a penalty on the grade — it is priced as one subtract-only term in the score, where you can see it.
This listing is an address its publisher runs, and you connect to it directly — this marketplace is not in the path. The scanner reads packages and public source, and an address is neither. So there is no grade — not a withheld one, an unmeasured one.
Release history
This is an address its publisher runs: which release it serves is theirs to choose, so there is nothing here to pin. The history below is for reading; the current release on file is 1.0.0.
1.0.0
undated
latestNo release note was published with this version.
—
no reviews yet
Who can review
One review per account, from a signed-in account that does not publish this listing. Nothing else is asked — you can say what you think before you install it. Publishers can reply once per review, and a review can be edited or deleted by whoever wrote it.
Sign in to write one
Any signed-in account that does not publish Shapesoda can review it, once — before installing it or after. A review from an account that has installed it is marked as one.
No reviews yet
Nobody has reviewed this listing. The rating on the card is the mean of the reviews written here and nothing else, so there is no rating until somebody writes the first — which takes a signed-in account that does not publish it, and nothing else.