Model Context Protocol (MCP) server for freee API integration
Nothing to run from here
Leverage is installed from its publisher's own source and answers where it runs, so this marketplace is not in the path of a single call. There is no address here to send one to, and a panel that pretended otherwise would be showing you an answer we made up. Install it and call it from your own client — the Installation tab has the entry for each one.
10
tools declared
—
trust score
remote
at its publisher
—
calls last 7d
What it does
Leveraged-yield router on Morpho. List strategies, simulate, and build UNSIGNED txs.
Quickstart
# 1 — add it to Claude Code
claude mcp add --scope user --transport http leverage-mcp https://api.spiralstake.xyz/mcp
# 2 — ask your agent for something these tools do
# list_strategies, get_strategy, get_prices and 7 more
Leverage costs nothing on mcprush: there is no plan to choose here, no cap to set and nothing mcprush can bill you for.
Publishernot claimed
SPAll 1 server
spiralstake1 server
1 category
Collected from a public index. Nobody has claimed this account, so nothing here was written by its author — claim it if it is yours.
Installation
Where are you running it?
Every route below installs the same thing and ends at the same approval screen. Nothing here runs on your machine and nothing runs on ours: this server answers at its publisher’s own address, and what you install is the connection straight to it.
Claude Codedeclared by this listing
This is a public server: it answers at its publisher’s own address and this marketplace is not in the path. Claude Code registers it in one command; --scope user makes it available in every project. The transport below is http, as the publisher's own manifest declares it.
claude mcp add --scope user --transport http leverage-mcp https://api.spiralstake.xyz/mcpReconnect, or start a new session, and the tools appear in the model’s tool list.
Free on mcprush, and it answers at its publisher’s own address: this marketplace is not in the path, so there is no key of ours to hold and no card to add.
What it writes
One config entry pointing straight at the publisher’s own address — this marketplace is not in the path, and nothing from this listing executes on your machine.
What you approve
10 tools, with what each one reads, writes and reaches shown before you agree — the same list on every route above. Read the tool surface.
Tool surface
What the model actually sees. Descriptions are diffed on every release — see version history.
List eligible Spiral strategies on a chain with raw risk facts (collateral/borrow APY, leverage ladder, oracle type, exit liquidity, LTVs, curator). Mainnet (1): correlated yield loops on stables, ETH, BTC and Pendle PTs. Robinhood Chain (4663): stable loops on USDG, directional perps (spiralHints.profile 'leveraged_perp' — APYs are financing carry only) and stock + yield equity vaults (profile 'e
| Parameter | Type | Required | Notes |
|---|---|---|---|
| category | string | no | Filter by collateral category: 'stable', 'ETH', 'BTC', 'stable-PT', 'stocks' (equity vaults), 'Other' (perps). |
| chainId | integer | no | Chain to target. Supported: 1, 4663. Default: 1. |
Get one eligible strategy's full raw facts by its Morpho market id.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| id | string | yes | Morpho market id (0x followed by 64 hex chars). |
| chainId | integer | no | Chain to target. Supported: 1, 4663. Default: 1. |
Current USD prices of every loan and collateral token the chain's strategies use (token address -> USD), including equity-vault stocks. Loan tokens are priced from CoinGecko; collateral from the market oracle × its loan token's price — the same figures the strategies' priceUsd fields carry.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| chainId | integer | no | Chain to target. Supported: 1, 4663. Default: 1. |
Preview opening a leveraged position — deterministic, read-only, no wallet needed. Returns the resulting leverage, effective LTV, leveraged collateral, expected leveraged APY, price impact, the auto-selected execution path, flash-loan size, and (if the flash loan exceeds direct market liquidity) the public-allocator reallocation fee. Numbers move with market prices.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| strategyId | string | yes | Morpho market id of the strategy (from list_strategies / get_strategy). |
| payToken | string | yes | Address of the token you pay in. May be the collateral (opened directly) or any other token (zapped: swapped to collateral first). Native ETH = the zero address 0x0000…0000. |
| amount | string | yes | Amount of payToken in human units (e.g. '10000' for 10,000 USDC). |
| leverage | number | no | Target leverage, e.g. 3. Provide this OR desiredLtv. |
| desiredLtv | string | no | Target LTV percent, e.g. '66.67'. Provide this OR leverage. |
| slippage | number | no | Swap slippage as a ratio (0.005 = 0.5%). Default 0.005, capped at 0.01. |
| chainId | integer | no | Chain to target. Supported: 1, 4663. Default: 1. |
Build the UNSIGNED transaction to open a leveraged position, for the given wallet to sign. Non-custodial: this server never signs, sends, or holds keys. The canonical output is the executable { approvals[], tx{to,data,value} } — sign and broadcast it directly (approvals first), plus the same position preview as simulate_leverage. meta.signingUrl is an optional one-click link for a human to sign in
| Parameter | Type | Required | Notes |
|---|---|---|---|
| strategyId | string | yes | Morpho market id of the strategy (from list_strategies / get_strategy). |
| payToken | string | yes | Address of the token you pay in. May be the collateral (opened directly) or any other token (zapped: swapped to collateral first). Native ETH = the zero address 0x0000…0000. |
| amount | string | yes | Amount of payToken in human units (e.g. '10000' for 10,000 USDC). |
| leverage | number | no | Target leverage, e.g. 3. Provide this OR desiredLtv. |
| desiredLtv | string | no | Target LTV percent, e.g. '66.67'. Provide this OR leverage. |
| slippage | number | no | Swap slippage as a ratio (0.005 = 0.5%). Default 0.005, capped at 0.01. |
| chainId | integer | no | Chain to target. Supported: 1, 4663. Default: 1. |
| userAddress | string | yes | The wallet address that will sign and send. Approvals and onBehalfOf are built for it. |
Read a wallet's open/closed Spiral leverage positions from chain state (read-only). For each: collateral/loan, leveraged collateral, net equity, debt, current LTV vs liquidation LTV (with headroom), current leverage, net USD value, and current leveraged APY. No cost-basis / realized P&L (those need off-chain history). Newest first. equityPositions lists the wallet's open equity vaults (stock leg
| Parameter | Type | Required | Notes |
|---|---|---|---|
| userAddress | string | yes | Wallet address to read positions for. |
| chainId | integer | no | Chain to target. Supported: 1, 4663. Default: 1. |
Build the UNSIGNED transaction to adjust or close an OPEN position, for the given wallet to sign. Non-custodial (never signs/holds keys). Canonical output is the executable { approvals[], tx{to,data,value} } (sign/broadcast directly); meta.signingUrl is an optional link for a human to sign in their own wallet. Actions: 'close' (unwind fully), 'increase_leverage' (borrow to a higher LTV), 'add_coll
| Parameter | Type | Required | Notes |
|---|---|---|---|
| userAddress | string | yes | Wallet that owns the position and will sign. |
| id | integer | yes | On-chain position index, from get_positions (its id). |
| action | string | yes | What to do to the position. |
| amount | string | no | Human-units amount. Required for add_collateral/remove_collateral/repay/borrow. |
| payToken | string | no | Token to pay in (add_collateral/repay). Collateral/loan = direct; any other = zapped. ETH = zero address. |
| full | boolean | no | repay only: clear the entire remaining debt. |
| desiredLtv | string | no | increase_leverage: target LTV percent (e.g. '80'). Provide this OR leverage. |
| leverage | number | no | increase_leverage: target leverage. Provide this OR desiredLtv. |
| slippage | number | no | Swap slippage ratio (0.005 = 0.5%). Default 0.005, capped at 0.01. |
| chainId | integer | no | Chain to target. Supported: 1, 4663. Default: 1. |
Preview depositing USDG into a stock + yield equity vault — deterministic, read-only, no wallet. You end up 1x long the stock (held as your own Morpho collateral), with stockLtvPct of its value borrowed as USDG and flash-looped into the vault's yield strategy. Returns the stock received, the borrow, the stock liquidation price and headroom, the yield leg's size/leverage/APY, the net APY at that
| Parameter | Type | Required | Notes |
|---|---|---|---|
| strategyId | string | yes | The vault's id from list_strategies (starts with 'equity-'). |
| amount | string | yes | Deposit amount in human units of the vault's deposit token (USDG), e.g. '10000'. |
| stockLtvPct | string | no | Stock-leg LTV percent to borrow at (e.g. '50'). Default: the vault's targetLtvPct. Capped at 88% of the stock market's liquidation LTV (55 on a 62.5% market) — a higher value is refused, not clamped. |
| slippage | number | no | Swap slippage ratio. Default 0.01 (the app's setting for vaults), capped at 0.01. |
| chainId | integer | no | Chain to target. Supported: 1, 4663. Default: 1. |
Build the UNSIGNED call batch to deposit into a stock + yield equity vault, for the given wallet to sign. Non-custodial. Returns calls[] (approve USDG → router, authorize the router on Morpho, the one-call equityEntry, revoke) to submit as ONE atomic batch (EIP-5792 wallet_sendCalls / Safe), plus the same preview as simulate_equity_deposit. meta.signingUrl is a one-click link for a human to sign
| Parameter | Type | Required | Notes |
|---|---|---|---|
| strategyId | string | yes | The vault's id from list_strategies (starts with 'equity-'). |
| amount | string | yes | Deposit amount in human units of the vault's deposit token (USDG), e.g. '10000'. |
| stockLtvPct | string | no | Stock-leg LTV percent to borrow at (e.g. '50'). Default: the vault's targetLtvPct. Capped at 88% of the stock market's liquidation LTV (55 on a 62.5% market) — a higher value is refused, not clamped. |
| slippage | number | no | Swap slippage ratio. Default 0.01 (the app's setting for vaults), capped at 0.01. |
| chainId | integer | no | Chain to target. Supported: 1, 4663. Default: 1. |
| userAddress | string | yes | The wallet that will sign and send; the stock leg and yield loop are opened for it. |
Build the UNSIGNED call batch to fully unwind an OPEN equity vault (from get_positions.equityPositions): close each of its yield loops, then one self-funded router call repays the stock debt, withdraws the stock, swaps it to USDG and returns the proceeds. Submit as ONE atomic batch. Non-custodial; the vault's yield loop cannot be closed alone through build_manage_tx. Only the vault's own loop(s) a
| Parameter | Type | Required | Notes |
|---|---|---|---|
| strategyId | string | yes | The vault's id ('equity-0x…'). |
| userAddress | string | yes | Wallet that owns the vault and will sign. |
| yieldPositionIds | array | no | The yield loop id(s) to close with the stock leg (from get_positions). Optional when the vault's yieldLoopMatch is tagged/basis/mixed; REQUIRED when it is 'ambiguous'. Nothing outside this list is clo |
| slippage | number | no | Swap slippage ratio. Default 0.01, capped at 0.01. |
| chainId | integer | no | Chain to target. Supported: 1, 4663. Default: 1. |
Free
$0 forever
- Every tool — any call limit is its publisher’s, not ours
- No card, and mcprush charges nothing for it
- Runs at its publisher’s own address — this marketplace is not in the path
- Nothing to cap, because mcprush bills nothing
What counts against your monthly calls
| Tool | Unit | Calls used | Out of the allowance |
|---|
Nothing here is billable: mcprush charges nothing to install Leverage or to call it, at any volume.
Call allowance · this installenforced at the gateway
Monthly allowance, in calls
—
—
Alert at 80% · then the tool returns a normal MCP error
Used this month: —
—Grade not published
No rule-by-rule report on file for this release
Two independent axes, because powerful and malicious are different questions. The grade is threat only. The capability level is blast radius, and it is never a penalty on the grade — it is priced as one subtract-only term in the score, where you can see it.
This listing is an address its publisher runs, and you connect to it directly — this marketplace is not in the path. The scanner reads packages and public source, and an address is neither: the repository linked on this page is where this record was collected from, not a copy of what the address serves, so it is not graded in its place. So there is no grade — not a withheld one, an unmeasured one.
Release history
This is an address its publisher runs: which release it serves is theirs to choose, so there is nothing here to pin. The history below is for reading; the current release on file is 0.1.1.
0.1.1
undated
latestNo release note was published with this version.
—
no reviews yet
Who can review
One review per account, from a signed-in account that does not publish this listing. Nothing else is asked — you can say what you think before you install it. Publishers can reply once per review, and a review can be edited or deleted by whoever wrote it.
Sign in to write one
Any signed-in account that does not publish Leverage can review it, once — before installing it or after. A review from an account that has installed it is marked as one.
No reviews yet
Nobody has reviewed this listing. The rating on the card is the mean of the reviews written here and nothing else, so there is no rating until somebody writes the first — which takes a signed-in account that does not publish it, and nothing else.