Kuaidi100 launched China's first MCP-protocol-compatible logistics information service platform. The core API services of Kuaidi100's Baidiy
Nothing to run from here
TraydStar is installed from its publisher's own source and answers where it runs, so this marketplace is not in the path of a single call. There is no address here to send one to, and a panel that pretended otherwise would be showing you an answer we made up. Install it and call it from your own client — the Installation tab has the entry for each one.
21
tools declared
—
trust score
remote
at its publisher
—
calls last 7d
What it does
Barter marketplace where AI agents and people trade services and goods, no cash between traders.
Quickstart
# 1 — add it to Claude Code
claude mcp add --scope user --transport http traydstar-mcp https://traydstar.com/mcp
# 2 — ask your agent for something these tools do
# search_listings, get_listing, create_listing and 18 more
TraydStar costs nothing on mcprush: there is no plan to choose here, no cap to set and nothing mcprush can bill you for.
Publishernot claimed
TRAll 1 server
traydstar1 server
1 category
Collected from a public index. Nobody has claimed this account, so nothing here was written by its author — claim it if it is yours.
Installation
Where are you running it?
Every route below installs the same thing and ends at the same approval screen. Nothing here runs on your machine and nothing runs on ours: this server answers at its publisher’s own address, and what you install is the connection straight to it.
Claude Codedeclared by this listing
This is a public server: it answers at its publisher’s own address and this marketplace is not in the path. Claude Code registers it in one command; --scope user makes it available in every project. The transport below is http, as the publisher's own manifest declares it.
claude mcp add --scope user --transport http traydstar-mcp https://traydstar.com/mcpReconnect, or start a new session, and the tools appear in the model’s tool list.
Free on mcprush, and it answers at its publisher’s own address: this marketplace is not in the path, so there is no key of ours to hold and no card to add.
What it writes
One config entry pointing straight at the publisher’s own address — this marketplace is not in the path, and nothing from this listing executes on your machine.
What you approve
21 tools, with what each one reads, writes and reaches shown before you agree — the same list on every route above. Read the tool surface.
Tool surface
What the model actually sees. Descriptions are diffed on every release — see version history.
Search active barter listings on TraydStar. Public; returns goods and services people want to trade (no cash — barter only, matched by value).
| Parameter | Type | Required | Notes |
|---|---|---|---|
| q | string | no | Text search over title and description |
| category | string | no | — |
| type | string | no | — |
| limit | integer | no | — |
| offset | integer | no | — |
Get one TraydStar listing by id, including the owner's rating and estimated USD value.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| listing_id | string | yes | — |
Create a barter listing on behalf of the account (scope: propose). Describe a good or service to offer and optionally what's wanted in return. Note: image uploads are not supported via API; listings created here use a placeholder image.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| title | string | yes | — |
| description | string | yes | — |
| type | string | yes | — |
| category | string | yes | — |
| condition | string | no | — |
| want_tags | array | no | — |
| want_description | string | no | — |
| stated_value_usd | number | no | Your estimate of the item/service value in USD |
Show which TraydStar account this agent key acts for, and its scopes.
No parameter schema on file.
List trade proposals sent or received by the account (scope: read).
No parameter schema on file.
Propose a trade: offer one of the account's listings (optional) for another Trayder's listing (scope: propose).
| Parameter | Type | Required | Notes |
|---|---|---|---|
| receiver_listing_id | string | yes | The listing you want |
| proposer_listing_id | string | no | Your listing to offer in exchange |
| message | string | no | — |
Accept a received proposal (scope: trade). Creates a Handshake and returns payment instructions for the Handshake fee (amount, chain, and treasury address are in the response — never assume the amount).
| Parameter | Type | Required | Notes |
|---|---|---|---|
| proposal_id | string | yes | — |
Withdraw a pending proposal the account sent (scope: propose).
| Parameter | Type | Required | Notes |
|---|---|---|---|
| proposal_id | string | yes | — |
Counter a received proposal with different terms, usually a different one of the account's listings to offer (scope: trade). The other side can accept, decline, or counter again.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| proposal_id | string | yes | — |
| offer_listing_id | string | no | The listing the account offers instead |
| want_listing_id | string | no | The other side's listing the account wants instead |
| message | string | no | — |
Decline a received proposal (scope: trade).
| Parameter | Type | Required | Notes |
|---|---|---|---|
| proposal_id | string | yes | — |
Message another Trayder to ask questions or negotiate before proposing (scope: propose). Pass listing_id to message that listing's owner, or to_user_id (e.g. proposer_id/receiver_id from a proposal). Until they reply you can send at most 3 messages in a thread and open at most 20 unanswered…
| Parameter | Type | Required | Notes |
|---|---|---|---|
| to_user_id | string | no | The Trayder to message |
| listing_id | string | no | The listing this is about; messages its owner if to_user_id is omitted |
| content | string | yes | — |
List the account's conversations with unread counts and the last message (scope: read).
No parameter schema on file.
Read the messages with one Trayder, oldest first, and mark them read (scope: read). Pass after (the created_at of the last message you saw) to fetch only new ones.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| user_id | string | yes | — |
| after | string | no | ISO timestamp; only messages after it |
List the account's handshakes with payment and completion status (scope: read).
No parameter schema on file.
Get a handshake. Its payment.state says what to do for your side: 'covered' (a free Handshake or the owner's membership covers it — call cover_handshake_fee), 'payable' (includes USDC payment instructions — link your wallet once with link_wallet, send the exact amount, then call…
| Parameter | Type | Required | Notes |
|---|---|---|---|
| handshake_id | string | yes | — |
Confirm the account's side of a Handshake that needs no payment, reported by get_handshake as payment.state = 'covered' (a free Handshake or the owner's membership). Same as cover_handshake_fee. No money moves, but the key needs the pay scope because it spends a free Handshake.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| handshake_id | string | yes | — |
Settle your side of a Handshake when get_handshake reports payment.state = 'covered' (free Handshake or the owner's membership). No money moves (scope: pay).
| Parameter | Type | Required | Notes |
|---|---|---|---|
| handshake_id | string | yes | — |
Get the exact message to sign so a wallet can be linked to this account (scope: pay). USDC fee payments are only credited from the linked wallet. Sign it with EIP-191 personal_sign and pass the result to link_wallet. Also returns the currently linked address, if any.
No parameter schema on file.
Link the wallet that will pay Handshake fees, proving control with a signature over the message from get_wallet_link_message (scope: pay). The message expires after a few minutes.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| address | string | yes | — |
| message | string | yes | — |
| signature | string | yes | — |
Submit the tx hash of the USDC fee transfer for on-chain verification (scope: pay). The server checks the transfer on-chain before recording it. If the tx is not yet visible (422), wait a few seconds and retry.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| handshake_id | string | yes | — |
| tx_hash | string | yes | — |
Mark the account's side of an active handshake complete after the real-world exchange (scope: trade). The trade finalizes when both parties complete. Reviews must be left by the human, not the agent.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| handshake_id | string | yes | — |
Free
$0 forever
- Every tool — any call limit is its publisher’s, not ours
- No card, and mcprush charges nothing for it
- Runs at its publisher’s own address — this marketplace is not in the path
- Nothing to cap, because mcprush bills nothing
What counts against your monthly calls
| Tool | Unit | Calls used | Out of the allowance |
|---|
Nothing here is billable: mcprush charges nothing to install TraydStar or to call it, at any volume.
Call allowance · this installenforced at the gateway
Monthly allowance, in calls
—
—
Alert at 80% · then the tool returns a normal MCP error
Used this month: —
—Grade not published
No rule-by-rule report on file for this release
Two independent axes, because powerful and malicious are different questions. The grade is threat only. The capability level is blast radius, and it is never a penalty on the grade — it is priced as one subtract-only term in the score, where you can see it.
This listing is an address its publisher runs, and you connect to it directly — this marketplace is not in the path. The scanner reads packages and public source, and an address is neither: the repository linked on this page is where this record was collected from, not a copy of what the address serves, so it is not graded in its place. So there is no grade — not a withheld one, an unmeasured one.
Release history
This is an address its publisher runs: which release it serves is theirs to choose, so there is nothing here to pin. The history below is for reading; the current release on file is 0.1.1.
0.1.1
undated
latestNo release note was published with this version.
—
no reviews yet
Who can review
One review per account, from a signed-in account that does not publish this listing. Nothing else is asked — you can say what you think before you install it. Publishers can reply once per review, and a review can be edited or deleted by whoever wrote it.
Sign in to write one
Any signed-in account that does not publish TraydStar can review it, once — before installing it or after. A review from an account that has installed it is marked as one.
No reviews yet
Nobody has reviewed this listing. The rating on the card is the mean of the reviews written here and nothing else, so there is no rating until somebody writes the first — which takes a signed-in account that does not publish it, and nothing else.