Access control for AI agents and MCP servers: allow, hold for approval, or block each tool call
Nothing to run from here
Unkey is installed from its publisher's own source and answers where it runs, so this marketplace is not in the path of a single call. There is no address here to send one to, and a panel that pretended otherwise would be showing you an answer we made up. Install it and call it from your own client — the Installation tab has the entry for each one.
19
tools declared
—
trust score
remote
at its publisher
—
calls last 7d
What it does
Manage API keys, identities, permissions, rate-limit overrides and verification analytics.
Quickstart
# 1 — add it to Claude Code
claude mcp add --scope user --transport http unkey-mcp https://unkey.usefulapi.io/mcp
# 2 — ask your agent for something these tools do
# unkey_liveness, unkey_get_key, unkey_whoami_key and 16 more
Unkey costs nothing on mcprush: there is no plan to choose here, no cap to set and nothing mcprush can bill you for.
Publishernot claimed
USAll 334 servers
usefulapi334 servers
24 categories
Collected from a public index. Nobody has claimed this account, so nothing here was written by its author — claim it if it is yours.
Installation
Where are you running it?
Every route below installs the same thing and ends at the same approval screen. Nothing here runs on your machine and nothing runs on ours: this server answers at its publisher’s own address, and what you install is the connection straight to it.
Claude Codedeclared by this listing
This is a public server: it answers at its publisher’s own address and this marketplace is not in the path. Claude Code registers it in one command; --scope user makes it available in every project. The transport below is http, as the publisher's own manifest declares it.
claude mcp add --scope user --transport http unkey-mcp https://unkey.usefulapi.io/mcpReconnect, or start a new session, and the tools appear in the model’s tool list.
Free on mcprush, and it answers at its publisher’s own address: this marketplace is not in the path, so there is no key of ours to hold and no card to add.
What it writes
One config entry pointing straight at the publisher’s own address — this marketplace is not in the path, and nothing from this listing executes on your machine.
What you approve
19 tools, with what each one reads, writes and reaches shown before you agree — the same list on every route above. Read the tool surface.
Tool surface
What the model actually sees. Descriptions are diffed on every release — see version history.
Check that the Unkey API is reachable and the root key works. The only GET in the v2 surface. Unkey: GET /v2/liveness.
No parameter schema on file.
Fetch a key's metadata by its key id — name, owner, permissions, credits, rate limits and whether it is enabled. Read-only despite being a POST. Unkey: POST /v2/keys.getKey.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| keyId | string | yes | The key's id (key_...), NOT the secret key itself. |
| decrypt | boolean | no | Also return the plaintext secret. Only works for keys created as recoverable. |
Given a plaintext API key, return which key it is and its metadata — without spending credits or recording a verification. This is the safe way to identify a key a customer sent you. Unkey: POST /v2/keys.whoami.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| key | string | yes | The plaintext API key to identify. |
Fetch an API namespace by id. Read-only despite being a POST. Unkey: POST /v2/apis.getApi.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| apiId | string | yes | The API's id (api_...). |
List every key issued under one API, optionally narrowed to a single customer by externalId. Read-only despite being a POST. Unkey: POST /v2/apis.listKeys.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| apiId | string | yes | The API whose keys to list. |
| externalId | string | no | Only keys belonging to this external identity. |
| limit | integer | no | Page size, 1-100. |
| cursor | string | no | Cursor from the previous page's response. Omit for the first page. |
List identities — the end users or organisations your keys belong to. Read-only despite being a POST. Unkey: POST /v2/identities.listIdentities.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| search | string | no | Free-text search over external ids. |
| limit | integer | no | Page size, 1-100. |
| cursor | string | no | Cursor from the previous page's response. Omit for the first page. |
Fetch a single identity with its metadata and shared rate limits. Read-only despite being a POST. Unkey: POST /v2/identities.getIdentity.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| identity | string | yes | The identity's external id or Unkey id. |
List the permissions defined in the workspace. Read-only despite being a POST. Unkey: POST /v2/permissions.listPermissions.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| search | string | no | Free-text search. |
| limit | integer | no | Page size, 1-100. |
| cursor | string | no | Cursor from the previous page's response. Omit for the first page. |
List the roles defined in the workspace. Read-only despite being a POST. Unkey: POST /v2/permissions.listRoles.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| search | string | no | Free-text search. |
| limit | integer | no | Page size, 1-100. |
| cursor | string | no | Cursor from the previous page's response. Omit for the first page. |
List the per-identifier overrides in one rate-limit namespace. Read-only despite being a POST. Unkey: POST /v2/ratelimit.listOverrides.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| namespace | string | yes | The rate-limit namespace name. |
| limit | integer | no | Page size, 1-100. |
| cursor | string | no | Cursor from the previous page's response. Omit for the first page. |
Fetch the override for one identifier in a namespace. Read-only despite being a POST. Unkey: POST /v2/ratelimit.getOverride.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| namespace | string | yes | The rate-limit namespace name. |
| identifier | string | yes | The identifier the override applies to. |
Run a read-only SQL query over key-verification analytics. The query must use one of the public aliases: key_verifications_v1, key_verifications_per_minute_v1, key_verifications_per_hour_v1, key_verifications_per_day_v1 or key_verifications_per_month_v1. Physical default.* table names are rejected, and results are scoped to your workspace. Unkey: POST /v2/analytics.getVerifications.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| query | string | yes | The SQL query, e.g. SELECT time, outcome, count(*) FROM key_verifications_per_day_v1 GROUP BY time, outcome. |
Create a new API namespace to issue keys under. Unkey: POST /v2/apis.createApi.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| name | string | yes | The API name. |
Issue a new API key under an API. The plaintext key is returned ONCE in the response and cannot be retrieved later unless recoverable is set. Unkey: POST /v2/keys.createKey.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| apiId | string | yes | The API to issue the key under. |
| name | string | no | A human-readable label for the key. |
| externalId | string | no | The identity (your user or org id) this key belongs to. |
| prefix | string | no | Prefix for the generated key, e.g. acme. |
| byteLength | integer | no | Entropy in bytes. Defaults to 16. |
| expires | integer | no | Expiry as a Unix timestamp in milliseconds. |
| enabled | boolean | no | Create the key enabled. Defaults to true. |
| recoverable | boolean | no | Store the key encrypted so it can be shown again later. Defaults to false. |
| roles | array | no | Role names to attach. |
| permissions | array | no | Permission names to attach. |
| meta | object | no | Arbitrary JSON metadata. |
Change a key's name, owner, metadata, expiry, roles, permissions or enabled state. Unkey: POST /v2/keys.updateKey.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| keyId | string | yes | The key to update. |
| name | string | no | New label. |
| externalId | string | no | Reassign the key to this identity. |
| expires | integer | no | New expiry as a Unix timestamp in milliseconds. |
| enabled | boolean | no | Enable or disable the key. |
| roles | array | no | Replace the key's roles. |
| permissions | array | no | Replace the key's permissions. |
| meta | object | no | Replace the key's metadata. |
Set, increment or decrement a key's remaining credits. Use set with no value for unlimited. Unkey: POST /v2/keys.updateCredits.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| keyId | string | yes | The key to change. |
| operation | string | yes | How to apply the value. |
| value | integer | no | The credit amount. Omit with operation=set to make the key unlimited. |
Revoke a key. By default this is a soft delete the key stops working but stays queryable; pass permanent to erase it. Unkey: POST /v2/keys.deleteKey.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| keyId | string | yes | The key to revoke. |
| permanent | boolean | no | Erase the key entirely instead of soft-deleting it. Defaults to false. |
Create an identity — an end user or organisation that keys and shared rate limits attach to. Unkey: POST /v2/identities.createIdentity.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| externalId | string | yes | Your own id for this user or organisation. |
| meta | object | no | Arbitrary JSON metadata. |
Set a custom rate limit for one identifier in a namespace — how you raise or lower a single customer's limit. Unkey: POST /v2/ratelimit.setOverride.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| namespace | string | yes | The rate-limit namespace name. |
| identifier | string | yes | The identifier the override applies to. |
| limit | integer | yes | Requests allowed per window. |
| duration | integer | yes | Window length in milliseconds. |
Free
$0 forever
- Every tool — any call limit is its publisher’s, not ours
- No card, and mcprush charges nothing for it
- Runs at its publisher’s own address — this marketplace is not in the path
- Nothing to cap, because mcprush bills nothing
What counts against your monthly calls
| Tool | Unit | Calls used | Out of the allowance |
|---|
Nothing here is billable: mcprush charges nothing to install Unkey or to call it, at any volume.
Call allowance · this installenforced at the gateway
Monthly allowance, in calls
—
—
Alert at 80% · then the tool returns a normal MCP error
Used this month: —
—Grade not published
No rule-by-rule report on file for this release
Two independent axes, because powerful and malicious are different questions. The grade is threat only. The capability level is blast radius, and it is never a penalty on the grade — it is priced as one subtract-only term in the score, where you can see it.
This listing is an address its publisher runs, and you connect to it directly — this marketplace is not in the path. The scanner reads packages and public source, and an address is neither: the repository linked on this page is where this record was collected from, not a copy of what the address serves, so it is not graded in its place. So there is no grade — not a withheld one, an unmeasured one.
Release history
This is an address its publisher runs: which release it serves is theirs to choose, so there is nothing here to pin. The history below is for reading; the current release on file is 1.11.1.
1.11.1
undated
latestNo release note was published with this version.
—
no reviews yet
Who can review
One review per account, from a signed-in account that does not publish this listing. Nothing else is asked — you can say what you think before you install it. Publishers can reply once per review, and a review can be edited or deleted by whoever wrote it.
Sign in to write one
Any signed-in account that does not publish Unkey can review it, once — before installing it or after. A review from an account that has installed it is marked as one.
No reviews yet
Nobody has reviewed this listing. The rating on the card is the mean of the reviews written here and nothing else, so there is no rating until somebody writes the first — which takes a signed-in account that does not publish it, and nothing else.