Brave Search MCP Server: web results, images, videos, rich results, AI summaries, and more.
Nothing to run from here
xportalx is installed from its publisher's own source and answers where it runs, so this marketplace is not in the path of a single call. There is no address here to send one to, and a panel that pretended otherwise would be showing you an answer we made up. Install it and call it from your own client — the Installation tab has the entry for each one.
93/100
tool-list score
29
tools declared
remote
at its publisher
—
calls last 7d
What it does
AI agent gateway with web fetching, data extraction, crypto pricing, and x402 payments
Quickstart
# 1 — add it to Claude Code
claude mcp add --scope user --transport http xportalx-mcp https://fflpdljiuruqdnewvwkk.supabase.co/functions/v1/mcp
# 2 — ask your agent for something these tools do
# fetch_api, fetch_page, fetch_pdf and 26 more
xportalx costs nothing on mcprush: there is no plan to choose here, no cap to set and nothing mcprush can bill you for.
Publishernot claimed
VIAll 1 server
virgen1011 server
1 category
Collected from a public index. Nobody has claimed this account, so nothing here was written by its author — claim it if it is yours.
Installation
Where are you running it?
Every route below installs the same thing and ends at the same approval screen. Nothing here runs on your machine and nothing runs on ours: this server answers at its publisher’s own address, and what you install is the connection straight to it.
Claude Codedeclared by this listing
This is a public server: it answers at its publisher’s own address and this marketplace is not in the path. Claude Code registers it in one command; --scope user makes it available in every project. The transport below is http, as the publisher's own manifest declares it.
claude mcp add --scope user --transport http xportalx-mcp https://fflpdljiuruqdnewvwkk.supabase.co/functions/v1/mcpReconnect, or start a new session, and the tools appear in the model’s tool list.
Free on mcprush, and it answers at its publisher’s own address: this marketplace is not in the path, so there is no key of ours to hold and no card to add.
What it writes
One config entry pointing straight at the publisher’s own address — this marketplace is not in the path, and nothing from this listing executes on your machine.
What you approve
29 tools, with what each one reads, writes and reaches shown before you agree — the same list on every route above. Read the tool surface.
Tool surface
What the model actually sees. Descriptions are diffed on every release — see version history.
Fetch structured JSON/XML data from any API endpoint. Best for REST APIs and data feeds. Cost: 0.01 USDC
| Parameter | Type | Required | Notes |
|---|---|---|---|
| url | string | yes | The API endpoint URL to fetch |
| method | string | no | — |
| headers | object | no | Optional HTTP headers |
| body | object | no | Optional request body for POST/PUT |
Fetch raw HTML content from any web page. Best for static HTML scraping. Cost: 0.01 USDC
| Parameter | Type | Required | Notes |
|---|---|---|---|
| url | string | yes | The web page URL to fetch |
| method | string | no | — |
Fetch and extract text content from PDF documents. Returns structured text with page numbers. Cost: 0.01 USDC
| Parameter | Type | Required | Notes |
|---|---|---|---|
| url | string | yes | The URL of the PDF document to fetch and parse |
Extract structured data from a web page using a JSON schema. AI-powered extraction. Cost: 0.01 USDC
| Parameter | Type | Required | Notes |
|---|---|---|---|
| url | string | yes | The web page URL to extract from |
| schema | string | yes | JSON schema string defining the data structure to extract |
| intent | string | no | Natural language description of what to extract |
Crawl a website starting from a URL, following links up to specified depth. Cost: 0.01 USDC
| Parameter | Type | Required | Notes |
|---|---|---|---|
| url | string | yes | The starting URL to crawl |
| maxPages | number | no | Maximum pages to crawl (default: 10) |
| maxDepth | number | no | Maximum link depth (default: 2) |
Convert a web page to clean Markdown format. Great for LLM consumption. Cost: 0.01 USDC
| Parameter | Type | Required | Notes |
|---|---|---|---|
| url | string | yes | The web page URL to convert |
Get real-time token price and market data from DexScreener. FREE - no payment required.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| tokenAddress | string | yes | The token contract address |
| chain | string | no | Blockchain (e.g., 'base', 'ethereum') |
Get cryptocurrency prices and exchange rates from Coinbase. FREE - no payment required.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| symbol | string | yes | Crypto symbol (e.g., 'BTC', 'ETH') |
| currency | string | no | Fiat currency (e.g., 'USD') |
Verify a wallet signature (EIP-191) to authenticate an agent. FREE - no payment required.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| message | string | yes | The message that was signed |
| signature | string | yes | The signature to verify |
| wallet_address | string | yes | The wallet address that signed |
x402 payment facilitation - get payment info, verify transactions, check rates. FREE
| Parameter | Type | Required | Notes |
|---|---|---|---|
| action | string | yes | Facilitator action |
| txHash | string | no | Transaction hash (for verify) |
| expectedAmount | string | no | Expected amount (for verify) |
| expectedRecipient | string | no | Expected recipient (for verify) |
| token | string | no | Token address (for verify) |
Access x402-protected APIs with automatic payment. Dynamic pricing: 0.01 USDC fee + target cost. Supports USDC on Base.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| targetUrl | string | yes | The x402-protected URL to access |
| targetMethod | string | no | HTTP method |
| targetHeaders | object | no | Additional headers to send to target |
| targetBody | object | no | Request body for POST/PUT requests |
| paymentProof | string | no | Transaction hash of USDC payment (required after initial 402 response) |
Get dynamic pricing for x402 proxy requests. FREE - returns total cost (proxy fee + target cost).
| Parameter | Type | Required | Notes |
|---|---|---|---|
| targetUrl | string | yes | The x402-protected target URL to probe for pricing |
Register your AI agent on-chain with ERC-8004 Trustless Agent Identity. Cost: 0.01 USDC. You receive an NFT representing your agent identity.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| agentName | string | yes | Name of your agent (e.g., 'MyAwesomeAgent') |
| agentDescription | string | yes | Description of what your agent does |
| recipientWallet | string | yes | Your wallet address (0x...) to receive the Agent NFT |
| agentEndpoints | array | no | Optional array of endpoints [{name, endpoint, version}] |
| paymentProof | string | no | Transaction hash of payment (required after initial 402 response) |
Understand why a job failed. FREE - lookup job failures or get failure code reference.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| jobId | string | no | xportalx job ID to look up failure details |
| failure_code | string | no | Any failure code to explain (e.g., 'RATE_LIMIT_429') |
Get pricing information for all MCP tools. FREE - returns cost breakdown for each tool.
No parameter schema on file.
Solve captchas on protected pages and extract content. Uses 2Captcha to bypass reCAPTCHA/hCaptcha, then Claude AI selects the best tool to retrieve content. Cost: 0.01 USDC
| Parameter | Type | Required | Notes |
|---|---|---|---|
| url | string | yes | The captcha-protected URL to access |
| captchaType | string | no | Type of captcha to solve |
| siteKey | string | no | Site key for reCAPTCHA/hCaptcha (optional - auto-detected if not provided) |
| intent | string | no | What you want to extract from the page after solving captcha |
Get comprehensive Zora NFT wallet data: NFTs minted, NFTs owned, creator profile, total mints/collections, and estimated earnings. FREE - no payment required.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| address | string | yes | Wallet address (EOA or contract) to look up |
| chain | string | no | Chain to query (e.g., 'zora', 'base', 'ethereum') |
Execute a token swap on Base via 0x DEX Aggregator. AI-ENHANCED: Accepts natural language like 'swap 10 USDC for VIRTUAL'. THREE MODES: (1) PRIVY MODE (RECOMMENDED): Provide owner_wallet - uses your secure Privy custodial wallet (create one first with create_wallet tool). (2) PRIVATE KEY MODE: Provide privateKey - server signs with your key (less secure). (3) BRIDGE MODE: Provide takerAddress only
| Parameter | Type | Required | Notes |
|---|---|---|---|
| request | string | no | Natural language swap request (e.g., 'swap 10 USDC for VIRTUAL', 'buy 100 DEGEN with USDC'). AI will extract the parameters automatically. |
| owner_wallet | string | no | RECOMMENDED: Your wallet address (0x...) that owns a Privy custodial wallet. The swap will be executed securely through your Privy wallet. Create one first using the create_wallet tool. |
| privateKey | string | no | LEGACY: Private key (0x... hex) to sign and broadcast transactions server-side. Consider using owner_wallet with Privy instead for better security. |
| takerAddress | string | no | User's wallet address (0x...). When provided WITHOUT owner_wallet or privateKey, returns a secure web bridge URL where user can sign transactions with their browser wallet. |
| sellToken | string | no | Token symbol (USDC, WETH, VIRTUAL, DEGEN, cbBTC, DAI, AERO, BRETT) OR token address (0x...) |
| buyToken | string | no | Token symbol (USDC, WETH, VIRTUAL, DEGEN, cbBTC, DAI, AERO, BRETT) OR token address (0x...) |
| sellAmount | string | no | Amount to sell. Use human-readable (e.g., '1.5' for 1.5 tokens) or atomic units (e.g., '1000000' for 1 USDC). Human-readable is auto-detected. |
| slippagePercentage | string | no | Slippage tolerance in percent (e.g., '0.5' for 0.5%). Default: 0.5 |
| slippageBps | string | no | Slippage in basis points (e.g., '50' = 0.50%). Takes precedence over slippagePercentage. |
Create a custodial wallet for an AI agent using Privy. Cost: 0.01 USDC. The owner wallet is automatically detected from your x402 payment - no need to provide it explicitly. The wallet can be used for automated transactions including swaps.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| owner_wallet | string | yes | Your signing wallet address (0x...) that will own this custodial wallet. Used as the lookup key for future operations. TIP: many clients can also pass just the address string as arguments. |
| label | string | no | Optional friendly name for this wallet (e.g., 'Trading Bot', 'Payment Agent') |
Fund your custodial wallet with USDC. DYNAMIC PRICING: You pay (amount + 0.01 USDC fee). The owner wallet is auto-detected from your x402 payment. Example: To deposit 5 USDC, you pay 5.01 USDC and 5 USDC is transferred to your custodial wallet.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| amount | string | yes | Amount of USDC to deposit into your custodial wallet (e.g., '5' for 5 USDC). You will pay this amount plus a 0.01 USDC platform fee. |
Fund your custodial wallet with ETH for gas. DYNAMIC PRICING: You pay the USDC equivalent of (ETH amount + 0.01 USDC fee). The owner wallet is auto-detected from your x402 payment. Example: To deposit 0.001 ETH, you pay ~$3.50 USDC (ETH value) + 0.01 USDC fee.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| amount | string | yes | Amount of ETH to deposit into your custodial wallet (e.g., '0.001' for 0.001 ETH). You will pay the USDC equivalent plus a 0.01 USDC platform fee. |
Withdraw USDC from your custodial wallet to your owner wallet. Cost: 0.01 USDC. The owner wallet is auto-detected from your x402 payment.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| amount | string | yes | Amount of USDC to withdraw from custodial wallet (e.g., '5' for 5 USDC). Must have sufficient balance. |
Send USDC from your custodial wallet to ANY wallet address. Cost: 0.01 USDC. The sender (your custodial wallet) is auto-detected from your x402 payment. Use this to pay other agents, transfer to exchanges, or send to any address.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| to_address | string | yes | Destination wallet address (0x...) to send USDC to. Can be any valid EVM address. |
| amount | string | yes | Amount of USDC to send (e.g., '5' for 5 USDC). Must have sufficient balance in your custodial wallet. |
Check the balance of your custodial wallet. FREE - no payment required. Returns ETH and USDC balances on Base network.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| owner_wallet | string | yes | Your signing wallet address (0x...) to look up the linked custodial wallet balance. |
Send USDC directly to ANY wallet address via x402 payment. Just provide to_address and amount - the flow auto-completes: 1) Pay 0.01 USDC platform fee 2) Pay the amount directly to destination. Tokens go from you to recipient. Perfect for paying agents, tipping, or sending to any address.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| to_address | string | yes | Destination wallet address (0x...) to receive the USDC. |
| amount | string | yes | Amount of USDC to send (e.g., '5' for 5 USDC). |
Screen tokens with Smart Money activity using Nansen Token Screener. Supports natural language like 'what are whales buying on base?' or 'trending tokens on solana'. Cost: 0.01 USDC
| Parameter | Type | Required | Notes |
|---|---|---|---|
| input | string | no | Natural language query (e.g., 'what are whales buying on base?', 'trending tokens this week') |
| query | string | no | Natural language query (alternative) |
| chains | array | no | Chains to query (e.g., ['ethereum', 'base', 'solana', 'arbitrum']) |
| chain | string | no | Single chain (alternative to chains array) |
| limit | number | no | Number of results (default: 20, max: 100) |
| sortBy | string | no | Sort field |
| sortDir | string | no | Sort direction |
Track net capital flows from Smart Money wallets. Supports natural language like 'are whales accumulating ETH?' or 'smart money flows for PEPE last 7 days'. Cost: 0.01 USDC
| Parameter | Type | Required | Notes |
|---|---|---|---|
| input | string | no | Natural language query (e.g., 'are smart money accumulating ETH?', 'whale flows last week') |
| query | string | no | Natural language query (alternative) |
| chains | array | no | Chains to query (e.g., ['ethereum', 'base', 'solana']) |
| chain | string | no | Single chain (alternative to chains array) |
| timeframe | string | no | Timeframe for netflow data |
| tokenAddress | string | no | Filter by specific token address OR symbol (e.g., 'PEPE', 'VIRTUAL', '0x...') |
| token_address | string | no | Filter by token address (alternative) |
| limit | number | no | Number of results (default: 20) |
Full token analytics with Nansen TGM. Supports natural language like 'analyze VIRTUAL token' or 'who holds the most PEPE?'. Auto-resolves token symbols to addresses. Cost: 0.01 USDC
| Parameter | Type | Required | Notes |
|---|---|---|---|
| input | string | no | Natural language query (e.g., 'analyze VIRTUAL token', 'show me PEPE holders') |
| query | string | no | Natural language query (alternative) |
| tokenAddress | string | no | Token contract address OR symbol (e.g., 'VIRTUAL', 'PEPE', '0x...') |
| token_address | string | no | Token contract address (alternative) |
| chain | string | no | Blockchain (e.g., 'ethereum', 'base', 'solana', 'arbitrum') |
| timeframe | string | no | Timeframe for flow data |
Comprehensive wallet analysis. Supports natural language like 'profile vitalik.eth' or 'what labels does 0x... have?'. Returns balances, Nansen labels, and transactions. Cost: 0.01 USDC
| Parameter | Type | Required | Notes |
|---|---|---|---|
| input | string | no | Natural language query (e.g., 'profile this wallet 0x...', 'analyze vitalik.eth') |
| query | string | no | Natural language query (alternative) |
| address | string | no | Wallet address (0x...) or ENS name to analyze |
| wallet | string | no | Wallet address (alternative) |
| chains | array | no | Chains to query for balances/transactions |
| chain | string | no | Single chain (alternative) |
| includeTransactions | boolean | no | Include recent transactions (default: true) |
Free
$0 forever
- Every tool — any call limit is its publisher’s, not ours
- No card, and mcprush charges nothing for it
- Runs at its publisher’s own address — this marketplace is not in the path
- Nothing to cap, because mcprush bills nothing
What counts against your monthly calls
| Tool | Unit | Calls used | Out of the allowance |
|---|
Nothing here is billable: mcprush charges nothing to install xportalx or to call it, at any volume.
Call allowance · this installenforced at the gateway
Monthly allowance, in calls
—
—
Alert at 80% · then the tool returns a normal MCP error
Used this month: —
ATool-list grade · score 93 / 100
Release 1.0.0 · scanned 20 Oct 2026
Graded from the tools this server lists, not from its source code.
Two independent axes, because powerful and malicious are different questions. The grade is threat only. The capability level is blast radius, and it is never a penalty on the grade — it is priced as one subtract-only term in the score, where you can see it.
Threat score100
Client score93
Findings0 threat · 4 capability
Capabilitymoderate
Coveragemanifest
Verificationnot in this report
Surface digeste2b80407f63901adfe6bdd68f6c19a82c4826baa693ad710e9d249f79a217a75
Score vectorthreat 100 → client 93
| Term | Level | What it prices | Points |
|---|---|---|---|
| capability-exposure | moderate | capability blast radius (moderate) — client exposure if the model is manipulated | −3 |
| coverage-honesty | manifest | inspection depth (manifest) — how much of the target the scan could see | −4 |
score = clamp(round(threatScore − E_cap − E_ver − E_cov), 0, 100). No model, no opinion, no network call at scoring time: the same methodology version against the same bytes always produces this number, and every line above is a field of the report rather than a summary of it.
What the scan could actually read
A grade is only as meaningful as its coverage, so the scanner publishes its own depth before it publishes its result.
The scan read each tool’s name, description, input schema and annotations exactly as the server listed them the last time it answered us; no code was reviewed. We ask the server again about once a month, and a list that changed is graded again.
Tool surfaceread
Implementation sourcenot available
Package metadatanot available
Live transportnot available
The implementation source was not read — this reflects the declared tool metadata only.
Capability — what it could do if the model were manipulated
Tags derived from each tool’s schema and the implementation, not from what the tool calls itself. moderate is the level these add up to.
| Tool | Capability tags | Why the tag was assigned |
|---|---|---|
| fetch_api | untrusted-input | untrusted-input: keyword "fetch" |
| fetch_page | untrusted-input | untrusted-input: keyword "fetch" |
| fetch_pdf | untrusted-input | untrusted-input: keyword "fetch" |
| extract | no tags | |
| crawl | untrusted-input | untrusted-input: keyword "crawl" |
| markdown_convert | no tags | |
| dexscreener_token | no tags | |
| coinbase_price | no tags | |
| verify_agent | no tags | |
| coinbase_facilitator | no tags | |
| x402_proxy | no tags | |
| x402_proxy_price | no tags | |
| erc8004_register | no tags | |
| failure_reason | no tags | |
| mcp_pricing | no tags | |
| solve_captcha | no tags | |
| zora_wallet | no tags | |
| swap | no tags | |
| create_wallet | no tags | |
| fund_wallet | no tags | |
| fund_wallet_eth | no tags | |
| withdraw_wallet | no tags | |
| send_tokens | no tags | |
| get_wallet_balance | no tags | |
| x402_send | no tags | |
| nansen_smart_money_holdings | no tags | |
| nansen_smart_money_netflows | no tags | |
| nansen_token_god_mode | no tags | |
| nansen_wallet_profiler | no tags |
Toxic-flow graph
The lethal trifecta, checked as a graph rather than as a checklist: untrusted input, a sensitive source and an external sink have to meet before there is a path worth worrying about.
The public result for this release does not print the flow graph, so there is nothing to show here. That is not the same as "no paths were found": what the scan did read is above, under coverage.
Supply chain and provenance
Integrityfirst-seen
Surface digeste2b80407f63901ad
Scanned2026-10-20
This is the first scan of this surface here, so there is nothing yet to compare it against.
Every result on this tab comes from one deterministic pass over the published package — offline, rule by rule, and auditable line by line above. Same methodology version, same bytes, same score.
Release history
This is an address its publisher runs: which release it serves is theirs to choose, so there is nothing here to pin. The history below is for reading; the current release on file is 1.0.0.
1.0.0
undated
latestNo release note was published with this version.
—
no reviews yet
Who can review
One review per account, from a signed-in account that does not publish this listing. Nothing else is asked — you can say what you think before you install it. Publishers can reply once per review, and a review can be edited or deleted by whoever wrote it.
Sign in to write one
Any signed-in account that does not publish xportalx can review it, once — before installing it or after. A review from an account that has installed it is marked as one.
No reviews yet
Nobody has reviewed this listing. The rating on the card is the mean of the reviews written here and nothing else, so there is no rating until somebody writes the first — which takes a signed-in account that does not publish it, and nothing else.