Comprehensive Model Context Protocol server for managing Home Assistant through AI assistants.
Nothing to run from here
NSW Development Applications (x402) is installed from its publisher's own source and answers where it runs, so this marketplace is not in the path of a single call. There is no address here to send one to, and a panel that pretended otherwise would be showing you an answer we made up. Install it and call it from your own client — the Installation tab has the entry for each one.
9
tools declared
—
trust score
remote
at its publisher
—
calls last 7d
What it does
NSW development application data: search, nearby and detail tools. Paid per call via x402 (USDC).
Quickstart
# 1 — add it to Claude Code
claude mcp add --scope user --transport http nsw-development-applications-x402-mcp https://agent-data-platform.langtools.workers.dev/mcp
# 2 — ask your agent for something these tools do
# nsw_da_get_summary, nsw_da_search_applications, nsw_da_get_application and 6 more
NSW Development Applications (x402) costs nothing on mcprush: there is no plan to choose here, no cap to set and nothing mcprush can bill you for.
Publishernot claimed
ZUAll 1 server
zuo3051 server
1 category
Collected from a public index. Nobody has claimed this account, so nothing here was written by its author — claim it if it is yours.
Installation
Where are you running it?
Every route below installs the same thing and ends at the same approval screen. Nothing here runs on your machine and nothing runs on ours: this server answers at its publisher’s own address, and what you install is the connection straight to it.
Claude Codedeclared by this listing
This is a public server: it answers at its publisher’s own address and this marketplace is not in the path. Claude Code registers it in one command; --scope user makes it available in every project. The transport below is http, as the publisher's own manifest declares it.
claude mcp add --scope user --transport http nsw-development-applications-x402-mcp https://agent-data-platform.langtools.workers.dev/mcpReconnect, or start a new session, and the tools appear in the model’s tool list.
Free on mcprush, and it answers at its publisher’s own address: this marketplace is not in the path, so there is no key of ours to hold and no card to add.
What it writes
One config entry pointing straight at the publisher’s own address — this marketplace is not in the path, and nothing from this listing executes on your machine.
What you approve
9 tools, with what each one reads, writes and reaches shown before you agree — the same list on every route above. Read the tool surface.
Tool surface
What the model actually sees. Descriptions are diffed on every release — see version history.
Get free counts of NSW development applications by status, application type and council. Call this first: it shows how many development applications are loaded, the exact council names the other tools accept, and the status and application type values. Optional filters narrow the counts. Counts refresh every 6 hours while the history backfill extends coverage back to 2018. Free, no payment needed.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| council | string/number | no | Council name, partial case-insensitive match (see by_council in /summary) (e.g. Parramatta) |
| status | string/number | no | Application status, exact match (e.g. Determined) |
| application_type | string/number | no | Application type, exact match (e.g. Development Application) |
Search NSW development applications by council, suburb, postcode or lodgement date, newest lodgement first. Returns up to 100 development applications per call with address, status, cost, dwellings, storeys and development types, plus has_more for paging with offset. status, application_type, development_type and min_cost must be combined with council, suburb or postcode. Use get_application for t
| Parameter | Type | Required | Notes |
|---|---|---|---|
| council | string/number | no | Council name, partial case-insensitive match (see by_council in /summary) (e.g. Parramatta) |
| suburb | string/number | no | Suburb of the primary address, case-insensitive (e.g. ERMINGTON) |
| postcode | string/number | no | 4-digit postcode of the primary address (e.g. 2115) |
| lodged_from | string/number | no | Lodgement date lower bound, yyyy-mm-dd (e.g. 2026-01-01) |
| lodged_to | string/number | no | Lodgement date upper bound, yyyy-mm-dd (e.g. 2026-06-30) |
| status | string/number | no | Application status, exact match (e.g. Determined) |
| application_type | string/number | no | Application type, exact match (e.g. Development Application) |
| development_type | string/number | no | Development type, partial match (e.g. dwelling) |
| min_cost | string/number | no | Minimum estimated cost of development in AUD (e.g. 1000000) |
| limit | string/number | no | Page size, 1-100 (default 20) |
| offset | string/number | no | Number of results to skip, 0-1000 (default 0) |
Get the full record of one of the NSW development applications by its Planning Portal application number (PAN). Returns every location with lot and plan, all development types, submission, lodgement, determination and exhibition dates, cost, dwellings, storeys, lots and the remaining source fields. Take PAN numbers from search_applications or search_nearby_applications. An unknown number returns n
| Parameter | Type | Required | Notes |
|---|---|---|---|
| pan | string/number | yes | Planning Portal application number (PAN) (e.g. PAN-624302) |
Find NSW development applications within 2 km of a street address or latitude/longitude, nearest first. Pass address (e.g. '10 Brigalow Ave, Casula') and it is geocoded against the official NSW address register, or pass lat and lng. Returns the distance in metres for each result plus the same fields as search_applications; meta.geocode shows the matched address. An unknown or ambiguous address ret
| Parameter | Type | Required | Notes |
|---|---|---|---|
| address | string/number | no | NSW street address with suburb; alternative to lat/lng (e.g. 10 Brigalow Ave, Casula NSW 2170) |
| lat | string/number | no | Latitude (WGS84); required unless address is given (e.g. -33.81) |
| lng | string/number | no | Longitude (WGS84); required unless address is given (e.g. 151.06) |
| radius_m | string/number | no | Radius in metres, 1-2000 (default 500) |
| lodged_from | string/number | no | Lodgement date lower bound, yyyy-mm-dd |
| limit | string/number | no | Max results, 1-100 (default 20) |
Resolve a NSW street address to its official form and coordinates, free. Matches the address against the official NSW address register (Spatial Services). Use it to check an address before a paid nearby search, or to get latitude/longitude. Ambiguous input returns suggestions. Free, no payment needed. Source: NSW Department of Planning, Housing and Infrastructure (NSW Planning Portal), CC BY 4.0.
| Parameter | Type | Required | Notes |
|---|---|---|---|
| address | string/number | yes | NSW street address with suburb (e.g. 10 Brigalow Ave, Casula NSW 2170) |
Get free counts of NSW complying development certificates (CDCs) by status, application type and council. Call this first: it shows how many complying development certificates (CDCs) are loaded, the exact council names the other tools accept, and the status and application type values. Optional filters narrow the counts. Counts refresh every 6 hours while the history backfill extends coverage back
| Parameter | Type | Required | Notes |
|---|---|---|---|
| council | string/number | no | Council name, partial case-insensitive match (see by_council in /summary) (e.g. Parramatta) |
| status | string/number | no | Application status, exact match (e.g. Approved) |
| application_type | string/number | no | Application type, exact match (e.g. Complying Development Certificate Application) |
Search NSW complying development certificates (CDCs) by council, suburb, postcode or lodgement date, newest lodgement first. Returns up to 100 complying development certificates (CDCs) per call with address, status, cost, dwellings, storeys and development types, plus has_more for paging with offset. status, application_type, development_type and min_cost must be combined with council, suburb or p
| Parameter | Type | Required | Notes |
|---|---|---|---|
| council | string/number | no | Council name, partial case-insensitive match (see by_council in /summary) (e.g. Parramatta) |
| suburb | string/number | no | Suburb of the primary address, case-insensitive (e.g. ERMINGTON) |
| postcode | string/number | no | 4-digit postcode of the primary address (e.g. 2115) |
| lodged_from | string/number | no | Lodgement date lower bound, yyyy-mm-dd (e.g. 2026-01-01) |
| lodged_to | string/number | no | Lodgement date upper bound, yyyy-mm-dd (e.g. 2026-06-30) |
| status | string/number | no | Application status, exact match (e.g. Approved) |
| application_type | string/number | no | Application type, exact match (e.g. Complying Development Certificate Application) |
| development_type | string/number | no | Development type, partial match (e.g. dwelling) |
| min_cost | string/number | no | Minimum estimated cost of development in AUD (e.g. 1000000) |
| limit | string/number | no | Page size, 1-100 (default 20) |
| offset | string/number | no | Number of results to skip, 0-1000 (default 0) |
Get the full record of one of the NSW complying development certificates (CDCs) by its Planning Portal CDC number. Returns every location with lot and plan, all development types, submission, lodgement, determination and exhibition dates, cost, dwellings, storeys, lots and the remaining source fields. Take CDC numbers from search_applications or search_nearby_applications. An unknown number return
| Parameter | Type | Required | Notes |
|---|---|---|---|
| cdc | string/number | yes | Planning Portal CDC number (e.g. CDC-388198) |
Find NSW complying development certificates (CDCs) within 2 km of a street address or latitude/longitude, nearest first. Pass address (e.g. '10 Brigalow Ave, Casula') and it is geocoded against the official NSW address register, or pass lat and lng. Returns the distance in metres for each result plus the same fields as search_applications; meta.geocode shows the matched address. An unknown or ambi
| Parameter | Type | Required | Notes |
|---|---|---|---|
| address | string/number | no | NSW street address with suburb; alternative to lat/lng (e.g. 10 Brigalow Ave, Casula NSW 2170) |
| lat | string/number | no | Latitude (WGS84); required unless address is given (e.g. -33.81) |
| lng | string/number | no | Longitude (WGS84); required unless address is given (e.g. 151.06) |
| radius_m | string/number | no | Radius in metres, 1-2000 (default 500) |
| lodged_from | string/number | no | Lodgement date lower bound, yyyy-mm-dd |
| limit | string/number | no | Max results, 1-100 (default 20) |
Free
$0 forever
- Every tool — any call limit is its publisher’s, not ours
- No card, and mcprush charges nothing for it
- Runs at its publisher’s own address — this marketplace is not in the path
- Nothing to cap, because mcprush bills nothing
What counts against your monthly calls
| Tool | Unit | Calls used | Out of the allowance |
|---|
Nothing here is billable: mcprush charges nothing to install NSW Development Applications (x402) or to call it, at any volume.
Call allowance · this installenforced at the gateway
Monthly allowance, in calls
—
—
Alert at 80% · then the tool returns a normal MCP error
Used this month: —
—Grade not published
No rule-by-rule report on file for this release
Two independent axes, because powerful and malicious are different questions. The grade is threat only. The capability level is blast radius, and it is never a penalty on the grade — it is priced as one subtract-only term in the score, where you can see it.
This listing is an address its publisher runs, and you connect to it directly — this marketplace is not in the path. The scanner reads packages and public source, and an address is neither. So there is no grade — not a withheld one, an unmeasured one.
Release history
This is an address its publisher runs: which release it serves is theirs to choose, so there is nothing here to pin. The history below is for reading; the current release on file is 0.1.2.
0.1.2
undated
latestNo release note was published with this version.
—
no reviews yet
Who can review
One review per account, from a signed-in account that does not publish this listing. Nothing else is asked — you can say what you think before you install it. Publishers can reply once per review, and a review can be edited or deleted by whoever wrote it.
Sign in to write one
Any signed-in account that does not publish NSW Development Applications (x402) can review it, once — before installing it or after. A review from an account that has installed it is marked as one.
No reviews yet
Nobody has reviewed this listing. The rating on the card is the mean of the reviews written here and nothing else, so there is no rating until somebody writes the first — which takes a signed-in account that does not publish it, and nothing else.